Researchers announced today that they have, for the first time, combined the light-emitting properties of indium phosphide with the light-routing capabilities of silicon into a single hybrid chip, creating a chip that can transfer data by laser light. The breakthrough, which uses standard silicon manufacturing processes, addresses one of the last major barriers to producing low-cost, high-bandwidth silicon photonics devices for computers and data centers. Hybrid silicon laser die containing hundreds of hybrid silicon lasers. The researchers from Intel Corp. and the University of California, Santa Barbara (UCSB), found that when voltage is applied to the hybrid chip, light generated in the indium phosphide enters the silicon waveguide to create a continuous laser beam that can be used to drive other silicon photonic devices. A laser based on silicon could drive wider use of photonics in computers because the cost can be greatly reduced by using high-volume silicon manufacturing techniques. "This could bring low-cost, terabit-level optical 'data pipes' inside future computers and help make possible a new era of high-performance computing applications," said Mario Paniccia, director of Intel's Photonics Technology Lab. "While still far from becoming a commercial product, we believe dozens, maybe even hundreds of hybrid silicon lasers could be integrated with other silicon photonic components onto a single silicon chip."John Bowers, UCSB professor of electrical and computer engineering, with hybrid silicon laser die. "Our research program with Intel highlights how industry and academia can work together to advance the state of science and technology," said John Bowers, a professor of electrical and computer engineering at UCSB. "By combining UCSB’s expertise with indium phosphide and Intel’s silicon photonics expertise, we have demonstrated a novel laser structure based on a bonding method that can be used at the wafer-, partial-wafer or die-level, and could be a solution for large-scale optical integration onto a silicon platform. This marks the beginning of highly integrated silicon photonic chips that can be mass produced at low cost."Cross-section schematic of a hybrid silicon laser. While widely used to mass produce affordable digital electronics today, silicon can also be used to route, detect, modulate and even amplify light, but not to effectively generate light. In contrast, Indium Phosphide-based lasers are commonly used today in telecommunications equipment. But the need to individually assemble and align them has made them too expensive to build in the high volumes and at the low costs needed by the PC industry.One of 36 hybrid silicon lasers on a single chip being tested. Electrical probes power the laser, while optical fibers collect laser light from both sides. The hybrid silicon laser involves a novel design employing indium phosphide-based material for light generation and amplification while using the silicon waveguide to contain and control the laser. The key to manufacturing the device is the use of a low-temperature, oxygen plasma -- an electrically charged oxygen gas -- to create a thin oxide layer (roughly 25 atoms thick) on the surfaces of both materials. When heated and pressed together the oxide layer functions as a “glass-glue” fusing the two materials into a single chip. When voltage is applied, light generated in the Indium Phosphide-based material passes through the oxide “glass-glue” layer and into the silicon chip’s waveguide, where it is contained and controlled, creating a hybrid silicon laser. The design of the waveguide is critical to determining the performance and specific wavelength of the hybrid silicon laser.Concept of a future integrated terabit silicon optical transmitter containing 25 hybrid silicon lasers, each emitting at a different wavelength, coupled into 25 silicon modulators, all multiplexed together into one output fiber. Today’s announcement builds on Intel’s other accomplishments in its long-term research program to "siliconize" photonics using standard silicon manufacturing processes. In 2004, Intel researchers were the first to demonstrate a silicon-based optical modulator with a bandwidth in excess of 1 GHz, nearly 50 times faster than previous demonstrations of modulation in silicon. In 2005, Intel researchers were the first to show that silicon could be used to amplify light using an external light source to produce a continuous wave laser-on-a-chip based on the Raman effect. Bowers has worked with indium phosphide-based materials and lasers for more than 25 years. Currently his research is focused on developing novel optoelectronic devices with data rates as high as 160 Gb/s and techniques to bond dissimilar materials together to create new devices with improved performance. The UCSB work was funded by the Microelectronics Technology Office of DARPA and Intel. For more information on the hybrid silicon laser, visit: www.intel.com/research/platform/sp/hybridlaser.htm or www.engineering.ucsb.edu