Close

Search

Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Industrial Photonics Photonics Showcase Photonics ProdSpec Photonics Handbook
More News
SPECIAL ANNOUNCEMENT
2016 Photonics Buyers' Guide Clearance! – Use Coupon Code FC16 to save 60%!
share
Email Facebook Twitter Google+ LinkedIn Comments

PV Power Boosted by 50%

Photonics.com
Nov 2008
CAMBRIDGE, Mass., Nov. 25, 2008 -- New ways of squeezing out greater efficiency from solar photovoltaic (PV) cells are emerging from computer simulations and lab tests conducted by a team of physicists and engineers at the Massachusetts Institute of Technology (MIT).

Using computer modeling and a variety of advanced chip-manufacturing techniques, they have applied an antireflection coating to the front, and a novel combination of multi-layered reflective coatings and a tightly spaced array of lines, called a diffraction grating, to the backs of ultrathin silicon films to boost the cells' output by as much as 50 percent.MIT-solar-panels.jpg

The carefully designed layers deposited on the back of the cell cause the light to bounce around longer inside the thin silicon layer, giving it time to deposit its energy and produce an electric current. Without these coatings, light would just be reflected back out into the surrounding air, said Peter Bermel, a postdoctoral researcher in MIT's physics department who has been working on the project.

"It's critical to ensure that any light that enters the layer travels through a long path in the silicon," Bermel said. "The issue is how far does light have to travel in the silicon before there's a high probability of being absorbed" and knocking loose electrons to produce an electric current.

The team began by running thousands of computer simulations in which they tried out variations in the spacing of lines in the grid, the thickness of the silicon and the number and thicknesses of reflective layers deposited on the back surface.

"We use our simulation tools to optimize overall efficiency and maximize the power coming out," Bermel said.

"The simulated performance was remarkably better than any other structure, promising, for 2-micrometer-thick films, a 50 percent efficiency increase in conversion of sunlight to electricity," said Lionel Kimerling, the Thomas Lord Professor of Materials Science and Engineering, who directed the project.

The simulations were then validated by actual lab-scale tests. "The final and most important ingredient was the relentless dedication of graduate student Lirong Zeng, in the Department of Materials Science and Engineering, to refining the structure and making it," Kimerling said. "The experiments confirmed the predictions, and the results have drawn considerable industry interest."

The team will report the first reduction to practice of their findings on Dec. 2 at the Materials Research Society's annual meeting in Boston.

The work is just a first step toward actually producing a commercially viable, improved solar cell. That will require additional fine-tuning through continuing simulations and lab tests, and then more work on the manufacturing processes and materials.

"If the solar business stays strong," Kimerling said, "implementation within the next three years is possible."

The MIT Deshpande Center selected the project for an "i-team" study to evaluate its business potential. The team analyzed the potential impact of this efficient thin solar cell technology and found significant benefits in both manufacturing and electrical power delivery, for applications ranging from remote off-grid to dedicated clean power. And, according to Bermel, the potential for savings is great because the high-quality silicon crystal substrates used in conventional solar cells represent about half the cost, and the thin films in this version use only about 1 percent as much silicon.

This project, along with other research work going on now in solar cells, has the potential to get costs down "so that it becomes competitive with grid electricity," Bermel said.

While no single project is likely to achieve that goal, he said, this work is "the kind of science that needs to be explored in order to achieve that."

A paper on their findings has been accepted for publication in Applied Physics Letters.

For more information, visit: www.mit.edu



GLOSSARY
diffraction grating
A glass substrate carrying a layer of deposited aluminum that has been pressure-ruled with a large number of fine equidistant grooves, using a diamond edge as a tool. Light falling on such a grating is dispersed into a series of spectra on both sides of the incident beam, the angular dispersion being inversely proportional to the line spacing. By proper shaping of the diamond edge, however, the grooves can be formed in such a way as to concentrate most of the energy into a single spectral...
photonics
The technology of generating and harnessing light and other forms of radiant energy whose quantum unit is the photon. The science includes light emission, transmission, deflection, amplification and detection by optical components and instruments, lasers and other light sources, fiber optics, electro-optical instrumentation, related hardware and electronics, and sophisticated systems. The range of applications of photonics extends from energy generation to detection to communications and...
Comments
Terms & Conditions Privacy Policy About Us Contact Us
back to top

Facebook Twitter Instagram LinkedIn YouTube RSS
©2016 Photonics Media
x We deliver – right to your inbox. Subscribe FREE to our newsletters.