Alma Lasers Ltd.

Stanford University researchers have developed a method to create needle-shaped laser beams of varying lengths and diameters, capable of increasing the quality of images obtained by OCT and other...

Micron Technology, a semiconductor technology company, plans to build the largest semiconductor fabrication facility in the United States. The new fab is expected to increase domestic supply of...

To help prevent infections caused by orthopedic implants, Purdue University researchers developed a laser-assisted surface modification process that may improve the efficacy of the implanted device....

The decisions made about patient care in the hour following a traumatic brain injury (TBI) are critical to patient outcome. A hand-held diagnostic device to assess the severity of the injury...

The HyperRapid NXT 266 industrial-grade deep UV picosecond laser from Coherent offers precision manufacturing as small as 5 µm. The device can ablate holes, trenches, through cuts, and...

The AU200-120x120 alignment stages from Optimal Engineering Systems Inc. feature 120 mm of travel in both the X and Y axes. The low-profile, 87-mm devices have a 188 × 188-mm open...

Microlight3D has announced eight resins with diverse properties for mechanical meta-materials and life sciences applications. The range of flexible, rigid, and biocompatible resins allows...

The PLT5 522EA_Q green laser diode from ams OSRAM is a cost-competitive replacement for red lasers in applications such as leveling, scanning, biosciences, and dot projection. The green laser...

Over 60 years have passed since the first demonstration of a laser in 1960. After the initial spark of interest, lasers were for a while categorized as “a solution waiting for a problem,”...

Laser development for the microscopy market continues to be driven by key trends in applications, which currently include superresolution techniques, multiphoton applications in optogenetics and...

As recently as five years ago, shopping for a microscope light source was fairly straightforward. For routine applications, it was tungsten halogen, typically 100 W, while for fluorescence, it was an...

Since their invention in the late 1960s, charge-coupled devices, also called CCDs, have found widespread use in imaging applications. Electronic cameras based on CCD technology are used in...

Finding the ideal ultra-fast laser source for a multiphoton imaging setup is not trivial. It is a fine balance between peak power, pulse energy and laser wavelength. In this white paper we show that...

An overview of the Single-Objective Light Sheet.

Overview of Rapid Automated Modular Microscope.

UV-Vis spectrophotometry is a simple and efficient technique for the analysis and evaluation of the quality of olive oil. Extra virgin, virgin, and lower-quality olive oils can be distinguished by...

The publishers of BioPhotonics invite you to attend a free virtual conference spanning three days. The BioPhotonics Conference will feature insights and innovations in microscopy, spectroscopy, flow...

Fluorescence imaging using lasers is a key technique in both biomedical research and clinical applications. Fluorescence-based microscopy for high-resolution and high-throughput multifluorophore...

Additional Questions and Answers from the Webinar are below: With more than 6 billion cell phone users in the world, the majority of them in developing countries, there are opportunities for...

Narrow linewidth lasers are a key component of numerous biophotonic diagnostic measurements, including Raman spectroscopy, flow cytometry, and blood flow. The miniaturization of these light sources...

Supercontinuum refers to a broad spectrum of light that spans a wide range of wavelengths, typically from the visible to the near-infrared or even mid-infrared regions of the electromagnetic...

The technology that deals with the interaction of organic materials with light and other forms of radiant energy whose quantum unit is the photon. This includes the emission, detection, absorption,...

Mode hopping in the context of lasers refers to a phenomenon where a laser system abruptly switches from one longitudinal mode to another. In a laser, different longitudinal modes represent distinct...

An ultrafast laser is a type of laser that emits extremely short pulses of light with durations typically on the order of femtoseconds (10-15 seconds) or picoseconds (10-12 seconds). These lasers are...

Fluorescent filter is a key component of biomedical and life science instruments, and its main function is to separate and select the characteristic band spectra of excitation light and emission...

At Andor, it matters to us that the products we develop make a real difference to our customers and contribute significantly to their research across Immunology, Microbiology, Neuroscience, Cells &...

Optolong Optics Co. Ltd., brand owner of Optolong, is a manufacturer of fluorescence filters and astronomy filters. We also offer other interference filters including UV filters, visible filters, and...

The Dragonfly 600 confocal microscope system delivers outstanding multi-dimensional images from subcellular (nm) to whole organism (cm), while significantly boosting productivity. Its unrivalled...

Established in 1985, OZ Optics is a leading worldwide supplier of fiber optic components, test equipment and sensors. OZ Optics manufactures its products in three locations, Ottawa (Canada),...

CASTECH is a recognized leading supplier of nonlinear optical crystals, laser crystals and precision optical components for laser, telecom, medical, analysis and detector markets. Products...

FOCtek provides customers with all types of custom manufactured lenses, Precision Optical Components, Polarizing Optics, Prisms, Filters, Coatings, Optical Systems, Crystals, Nonlinear Crystals,...

OHARA manufactures more than 130 environmentally safe optical glass types, free of both lead and arsenic. More than 300 tons of optical glass are melted per month, available in the following forms of...