Flexible solar from Canada

An international research team has produced an all-perovskite tandem solar cell with exceptionally high open-circuit voltage and efficiency. The prototype device demonstrates the potential of...

Commercial OLED applications such as display technologies require blue emitters that are more stable and efficient. This need has been intensified by newly proposed power-efficient OLED display...

Perovskite technology developer Caelux closed a $12 million series A3 funding round. The company’s series A total of $24 million will be allocated to support its factory ramp, R&D, and...

With the advent of the IoT, there is increased need to display large amounts of information to people quickly and without distortion in all types of lighting conditions. Though transmissive and...

The New Energy Light Module (NELM) from New Energy is built with CREE LEDs and is a replacement for the discontinued CREE LED LMH2s. A solution for area illumination and commercial lighting spaces,...

The GP-CVM600P series of 600-W LED constant voltage drivers from GlacialPower include nondimming, 3-in-1, and DALI-2 dimming versions. The direct-current output voltages include 12, 24, 36, 48,...

The LUX 3030 and 2835 from Luminus Devices are LEDs with KSF narrow-band red phosphor technology. The LEDs deliver a 120° typical viewing angle and minimum 90 color rendering index (CRI) with a...

The series of colored LEDs from ams OSRAM are RGB versions of the previously released OSTAR® Projection Compact LEDs. Using a 2-mm² chip, the LEDs have a high luminous output, with the...

An integrating sphere’s function is to spatially integrate radiant flux (light). However, before one can optimize a sphere design for a particular application, it is important to understand how...

In the beginning, automated inspection focused on the camera and optics, the algorithms, the interface hardware and the processor. Only rarely was attention paid to the lighting system or lighting...

An optical time-domain reflectometer sends short pulses of light into a fiber and measures its reflections as a function of time. The delay of these reflections to the detector as well as their...

The wavelength range of commercially available LEDs with single-element output power of at least 5 mW is 275 to 950 nm. Each wavelength range is made from a specific semiconductor material family,...

The optoelectronic properties of an OLED device are mapped using an RMS1000 Confocal Raman Microscope in spectral and time-resolved photoluminescence and electroluminescence imaging modes. These...

Discover the power of light guides with our free whitepaper! Learn about total internal reflection, surface features, and performance parameters with ease. Elevate your expertise and stay ahead in...

Specifications for illumination systems for biomedical imaging and industrial metrology generally converge on spectral, spatial and temporal light output characteristics. This article describes some...

The FISBA READYBeam™ is our answer to customers' increasing demand for compact, powerful, and reliable multicolor laser source that can be easily integrated into existing set-ups. The multicolor...

In recent years, hand-held spectrophotometers have gained a lot of popularity because they can be deployed in the field. Rather than bringing the object under analysis to the lab and using a bulky...

Non-destructive, portable, and extremely discriminating in its analysis -- Raman spectroscopy has established itself as a powerful tool in the identification and quantification of chemicals in...

Fluorescence imaging in life sciences and microscopy applications has traditionally used mercury, metal halide, and xenon arc lamps for illumination. With advances in technology, LEDs are now able to...

Barry Young, CEO of the OLED Association and an authority on the technology, presents a broad look at display applications utilizing OLEDs. In 2015, OLED displays had revenues of US$13.5b and it is...

A solar cell that is lightweight and flexible because of its construction by vacuum deposition of a semiconductor material (e.g., gallium arsenide or cadmium sulfide) onto a thin metal or plastic...

Gallium nitride-based light-emitting diodes (GaN-based LEDs) are semiconductor devices that emit light when an electric current passes through them. These LEDs are constructed using gallium nitride...

Chip-on-board (COB) lights refer to a type of LED lighting technology where multiple LED chips are directly mounted onto a substrate, typically a printed circuit board (PCB), without the need for...

Chirality is a property of certain molecules and objects in which they are non-superimposable on their mirror images. In other words, a chiral object or molecule cannot be exactly superimposed onto...

On this month's episode of Light Matters, we take you to the South by Southwest (SXSW) Trade Show in Austin, Texas, as new photonics innovations hit the show floor of the Austin Convention Center....

In this month's Light Matters Extra, we take you to the Quantum Photonics Laboratory at MIT run by Dr. Dirk Englund. Dr. Englund's group, the Quantum Photonics Group, is made up of postdocs and...

In this month's Light Matters Extra, we give you an in-depth look at the relationship between researchers and scientists at the University of California Davis, and surgeons and clinicians at nearby...

On this month's episode of Light Matters, we take you to central Massachusetts as Worcester Polytechnic Institute and Quinsigamond Community College take on a comprehensive joint photonics laboratory...

Excelitas Technologies® Corp. is a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions to meet the illumination, optical, optronic,...

Andor Technology Ltd is a global developer and manufacturer of high-performance scientific cameras, microscopy systems and spectrographs for academic, government, and industrial applications. Founded...

Precision Optical: our name embodies who we are. Since 1959, Precision Optical has earned a widely recognized reputation for reliability, value, and quality precision optics for the most demanding...

LaserPoint manufactures a wide portfolio of laser power and energy meters able to perform laser measurements with high accuracy. They developed the hard coatings to absorb the laser radiation which...