Search
Menu
Meadowlark Optics - SEE WHAT

NRL Developing New Laser-Machining Techniques

Facebook X LinkedIn Email
WASHINGTON, July 2, 2010 — Scientists at the Naval Research Laboratory (NRL) report that they have developed new laser-machining techniques for radiation detectors.

“The new detectors will enable the next generation of space-based high-energy radiation astronomical research and might also be used for homeland security applications,” said Dr. Bernard Phlips, who heads the NRL team.

The radiation detection section in NRL’s Space Science Div. is developing novel radiation detectors based on hole- or trench-arrays in semiconductors (also known as 3-D detectors). A widely spaced hole-array is desirable in that it allows lateral depletion and charge collection. This decreases the device thickness and depletion voltage and consequently reduces material quality requirements and cost of the detector material. The radiation detectors that will be produced with these new NRL-developed techniques will have a smaller size and substantially lower weight and power consumption than current state-of-the-art devices.


Optical micrograph (cross-section) of ~ 10-µm-wide laser-machined holes in an indium phosphide (InP) substrate which is 450 µm thick.

The NRL team developed novel ways to laser micromachine hole-arrays in a variety of semiconductors, including silicon, cadmium telluride and indium phosphide. Their reproducible new fabrication methodology is the critical process step for 3-D hole-arrays detector development. The resulting laser-machined holes have a much higher aspect ratio (diameter to depth ratio) than holes achieved with standard fabrication techniques. For example, laser-micromachined hole-arrays into silicon that have been developed at NRL have aspect ratios up to 100:1, while traditional techniques allow a maximum of only 40:1, according to the lab.

The laser micromachining hole-arrays work is being performed at NRL’s Institute for Nanoscience (NSI) using its newly installed Oxford Laser E-series micro-machining system. Dr. Marc Christophersen, from NRL’s High-Energy Space Environment Branch who developed the novel laser-machining techniques, is the NSI custodian for the Oxford Laser system. In addition to performing his own research on the system, Christophersen is responsible for user training, tool maintenance, and the initial tool start-up.

For more information, visit: www.nrl.navy.mil
Hamamatsu Corp. - Earth Innovations MR 2/24

Published: July 2010
Glossary
indium phosphide
Indium phosphide (InP) is a compound semiconductor material composed of indium (In) and phosphorus (P). It belongs to the III-V group of semiconductors, where elements from groups III and V of the periodic table combine to form a variety of important semiconductor materials. Indium phosphide is known for its favorable electronic and optical properties, making it widely used in the fabrication of optoelectronic devices. Key features and properties of indium phosphide include: Bandgap: Indium...
radiation
The emission and/or propagation of energy through space or through a medium in the form of either waves or corpuscular emission.
3-DAmericasastronomicalBernard Phlipscadmium telluridedefensedetectorsfabricationHigh-Energy Space Environmenthole-arrayhomeland securityindium phosphidelaser machinedlaser machiningMarc ChristophersenmicromachiningNaval Research LaboratoryNRLNSIoptical micrographOxford LaserradiationResearch & TechnologysemiconductorsSensors & Detectorsspace scienceLasers

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.