GT Solar Receives $460M Order

Perovskite technology developer Caelux closed a $12 million series A3 funding round. The company’s series A total of $24 million will be allocated to support its factory ramp, R&D, and...

An international research team has produced an all-perovskite tandem solar cell with exceptionally high open-circuit voltage and efficiency. The prototype device demonstrates the potential of...

Scientists at Lawrence Livermore National Laboratory (LLNL) and the National Ignition Facility (NIF) have reportedly advanced last December’s laser fusion breakthrough result. For the second...

University of California, Riverside (UCR) researchers have designed a composite material that offers powerful photon upconversion capabilities and that could support a range of light-driven...

The LUX 3030 and 2835 from Luminus Devices are LEDs with KSF narrow-band red phosphor technology. The LEDs deliver a 120° typical viewing angle and minimum 90 color rendering index (CRI) with a...

The New Energy Light Module (NELM) from New Energy is built with CREE LEDs and is a replacement for the discontinued CREE LED LMH2s. A solution for area illumination and commercial lighting spaces,...

The line of Optoelectronic Materials from Alfa Chemistry offers many organic solutions to photonic problems. The line includes a dye-sensitized solar cell (DSSC), electrodes, flexible printed...

The HCS-150-ZEB from Advanced Illumination is an LED lighting controller developed specifically for Zebra Iris GTX smart cameras. The controller is capable of directly powering the camera connected...

The wavelength range of commercially available LEDs with single-element output power of at least 5 mW is 275 to 950 nm. Each wavelength range is made from a specific semiconductor material family,...

As recently as five years ago, shopping for a microscope light source was fairly straightforward. For routine applications, it was tungsten halogen, typically 100 W, while for fluorescence, it was an...

In the beginning, automated inspection focused on the camera and optics, the algorithms, the interface hardware and the processor. Only rarely was attention paid to the lighting system or lighting...

An integrating sphere’s function is to spatially integrate radiant flux (light). However, before one can optimize a sphere design for a particular application, it is important to understand how...

The optoelectronic properties of an OLED device are mapped using an RMS1000 Confocal Raman Microscope in spectral and time-resolved photoluminescence and electroluminescence imaging modes. These...

Wideband or narrowband filters from the VIS to MWIR.

We are pros at designing, developing, and manufacturing notch filters!

3m.i.k.r.o.n.™ is the technology platform for compact, efficient, fast and reliable lasers for a wide range of potential applications in the field of medical engineering and industry.

This event is supported by the European initiatives presented and is moderated by EPIC, the European Photonics Industry Consortium. The European Commission is helping companies access the...

In today’s energy-challenged world, clean energy topics are increasingly important, particularly with solar cell designs reaching new efficiency breakthroughs. This webinar series shares the...

Presenters: Professor Stephen Boppart The Future of Healthcare With Optical Biomedical Imaging A medical doctor and professor at the University of Illinois, Boppart's...

If you are interested in learning how QDs are currently used in displays and how the same materials are being engineered to yield even brighter, more efficient, better colors for future displays,...

Gallium nitride-based light-emitting diodes (GaN-based LEDs) are semiconductor devices that emit light when an electric current passes through them. These LEDs are constructed using gallium nitride...

Epitaxial equipment refers to a set of specialized tools and systems used in the process of epitaxy, which is the growth of crystalline layers on a substrate material. Epitaxial growth is a critical...

Indium phosphide (InP) is a compound semiconductor material composed of indium (In) and phosphorus (P). It belongs to the III-V group of semiconductors, where elements from groups III and V of the...

An exciton is a quasiparticle that represents the bound state of an electron and a hole in a solid-state material, typically a semiconductor or an insulator. In simpler terms, an exciton is a paired...

On this month's episode of Light Matters, we take you to the South by Southwest (SXSW) Trade Show in Austin, Texas, as new photonics innovations hit the show floor of the Austin Convention Center....

On this month's episode of Light Matters, we introduce you to a green energy company that is transforming China's national treasure — the giant panda — into panda-shaped solar farms. We also bring...

In this month's Light Matters Extra, we take you to the Quantum Photonics Laboratory at MIT run by Dr. Dirk Englund. Dr. Englund's group, the Quantum Photonics Group, is made up of postdocs and...

On this month's episode of Light Matters, we take you to central Massachusetts as Worcester Polytechnic Institute and Quinsigamond Community College take on a comprehensive joint photonics laboratory...

Excelitas Technologies® Corp. is a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions to meet the illumination, optical, optronic,...

Opto Diode Corporation (Camarillo, CA), an ITW Company, delivers industry-leading sensors, photodiodes, IR detectors, photonic modules, assemblies, and LEDs. Available in standard and custom designs,...

Andor Technology Ltd is a global developer and manufacturer of high-performance scientific cameras, microscopy systems and spectrographs for academic, government, and industrial applications. Founded...

Precision Optical: our name embodies who we are. Since 1959, Precision Optical has earned a widely recognized reputation for reliability, value, and quality precision optics for the most demanding...