Mounts

Arroyo Instruments offers a full line of laser and LED mounts that support a broad range of devices, from small TO-5.6 lasers to large 50W modules. Because many applications do not use standard devices, several of our mounts (264, 284, and 286) can be customized with specific patterns to mount any device.

The 203/205 Butterfly LaserMounts offer solutions for 14-pin and 7-pin butterfly lasers. With zero-insertion-force (ZIF) sockets and fully configurable wiring, the Butterfly LaserMounts are quick to integrate into your test setup.

The 212/214 DIL LaserMounts support 14-pin DIL and 8-pin mini-DIL lasers, and like the 203/205 mounts, they feature zero-insertion-force (ZIF) sockets and fully configurable wiring.

The 207 LaserMounts offer higher power solutions for many 5-10W medium-powered fiber pigtailed lasers. With a user-configurable quick-disconnect electrical interface and broad standard device support, the 207 is an excellent choice.

The 224 and 266 mounts are small (2" x 2") form-factor fixtures designed for low power TO-can and LED applications. The 224 and 226 are full featured, with integrated temperature control and easy device connections.

The 240 Series LaserMounts are built around an efficient 4" cube heat sink on an included pedestal mount. Designed for C-mount, HHL, and TO-3 laser devices.

The 260 Series LaserMounts are designed for high power laser devices requiring passive or active temperature control. Common applications are high power fiber pigtailed lasers, but with the breadboard version of the 264, many different applications can be supported.

The 280 Series TECMounts are designed for high power temperature control for both laser and non-laser applications. With larger cooling plates and higher capacities (up to 100W), the 280 Series TECMounts provide the next level of flexibility, capability, and control.

Visit the Arroyo Instruments web site to see these mounts as well as a complete range of drivers and temperature controllers.