OLCHING, Germany, Dec. 18, 2012 — For optical bench applications, Laser Components GmbH has introduced the P-CUBE photodiode modules, which deliver precise measurement technology in a compact setup.
Low-noise, sensitive PIN photodiodes are housed in cubes that have an edge
length of 40 mm. For integration into optomechanical setups, they can
be attached to a rod system.
Available are a GaP photodiode (190 to 570 nm), a Si photodiode (200 to 1050 nm) and an InGaAs PIN photodiode (800 to 2200 nm). The photocurrent is obtained
using a BNC connector. The P-CUBE also is available with an optical FC connector.
The programmable iAMP-700 current amplifier is directly connected to the
P-CUBE with a BNC connector. It is possible to achieve amplifications of 102 to 1011
V/A with the iAMP-700.
By combining the P-CUBE and iAMP-700, the smallest amount of light can be detected reliably. The iAMP’s electromagnetic-compatibility housing allows application in proximity to the source. The P-CUBEs require a bias voltage between
−10 and 10 V, obtained directly from the iAMP.
To contact the manufacturer of this product, click here