NEWBURY PARK, Calif., Sept. 24, 2013 — Opto Diode Corp. has introduced the UVG100 silicon photodiode for applications that require extreme stability for the detection of vacuum-UV and extreme-UV photons.
The photodetector has a 100-mm2
active area and features good UV response. After exposure to megajoules/cm2
, it showed less than 2 percent responsivity loss. The device delivers 100 percent quantum efficiency and features high radiation hardness. A proprietary oxynitride front window protects it from humidity and other environmental conditions.
Responsivity under test conditions at 254 nm is a minimum of 0.08, typical 0.09, and maximum 0.13 A/W. The rise time at 10 V is a maximum of 10 µs. The shunt resistance at ±10 mV is a minimum of 20 MΩ, the reverse breakdown voltage is typically 10 V, and the capacitance is typically 10 nF with a maximum of 20 nF.
To contact the manufacturer of this product, click here