Search
Menu
Cognex Corp. - Smart Sensor 3-24 GIF LB

Drones with Multispectral Cameras Bring Efficiency to High-Throughput Plant Phenotyping

Facebook X LinkedIn Email
Drone-supported multispectral imaging can help break the ‘phenotyping bottleneck’ and enable plant breeders to grow the most drought-tolerant, disease-resistant and highest-yielding genetically enhanced crops. However, shortcomings in aerial multispectral imaging technology must be overcome before it can help breeders grow the perfect plant.

JAMES SCHLETT, EDITOR, [email protected]

In 1866, the Brno Natural History Society, in what is now the Czech Republic, published an Austrian monk’s paper, “Experiments in Plant Hybridization,” which reviewed his observations of pea plants grown in a monastery garden. Little did the monk, Gregor Mendel, know at the time that he would become known as the father of modern genetics by hypothesizing that hereditary traits, which could be dominant or recessive, were passed from a parent plant to its offspring. These traits from the parent plants influenced everything from the purple or white color of their offspring’s flowers to roughness or smoothness of their pods1.

A Raptor Maps Inc. drone flies over a wheat field showing signs of wind damage.

Figure 1.
A Raptor Maps Inc. drone flies over a wheat field showing signs of wind damage. Courtesy of Raptor Maps.

Since then, genetics has literally changed the field of agriculture. Today, 150 years after the publication of Mendel’s seminal paper on plant hybridization, scientists are struggling less with altering the genetic makeup — or genotypes — of various crops and more with assessing the physical expression of genes — or phenotypes.

In other words, scientists and engineers are still looking for the 21st-century equivalent of a monk collecting phenotypic data by standing over a garden. The process is known as high-throughput plant phenotyping (HTPP), and agricultural genetic engineers today are concerned with finding the optimal genes of more than just pea plants. Although scientists over the past two decades have made significant progress in gene sequencing technologies, there is currently a “phenotyping bottleneck” where the understanding of genetic information slows to a crawl because the processes for observing crop phenotypes remains slow, costly, labor-intensive and even destructive in some cases2.

Multispectral imaging is emerging as the best tool for breaking that bottleneck. Even though this technology isn’t new, the literal and figurative rise of unmanned aerial vehicles (UAVs) is spurring innovation and yielding a new crop of sensors and imagers that allows researchers to collect and analyze richer spectral data on a variety of staples such as corn, cotton, potatoes, sorghum and wheat. Peas, too (Figure 2).

 False color high resolution aerial image (R, G, NIR) used for high-throughput phenotyping in wheat fields.
Figure 2.
False color high resolution aerial image (R, G, NIR) used for high-throughput phenotyping in wheat fields. The image provides insights of the wheat’s winter hardiness and can also be used for estimating yield potential. Courtesy of Washington State University.

“This is the bloody cutting edge of high-throughput phenotyping,” said Kevin P. Price, the executive vice president of research and technology development for AgPixel LLC, a Johnston, Iowa-based remote sensing and geospatial analysis firm. His firm recently helped a plant breeder identify a plot of genetically engineered sorghum that exhibited phenotypes that help increase biomass, making the crop ideal for biofuel applications (Figure 3).

Aerial multispectral imaging

For decades, farmers and scientists have relied on multispectral images to help them obtain sweeping views of fields and the conditions of crops. The relationship, commonly referred to as precision agriculture, has been growing stronger since the launch of the first space-based multispectral imager, Landsat 1, in 1972.

Increased sorghum biomass can be achieved by increasing leaf area, with the top leaves growing more vertically and the bottom leaves growing more horizontally.

Figure 3. Increased sorghum biomass can be achieved by increasing leaf area, with the top leaves growing more vertically and the bottom leaves growing more horizontally. Using a multirotor UAV equipped with a multispectral imaging sensor, AgPixel LLC helped a plant breeder determine that genetically engineered sorghum grown in plots 24 and 41 displayed these desired phenotypes. In the chart, higher percentages of visible area for uppermost leaves suggest a more horizontal geometry; and higher percentages of visible area for lowermost leaves suggest a more vertical geometry. Courtesy of AgPixel.

Multispectral imaging involves the collection of data across the electromagnetic spectrum, usually including light that is visible and invisible to the human eye. Through the use of filters, multispectral sensors capture, within broad and separate bands, the light reflected off the surface of vegetation and other objects. Given that not all objects absorb light the same way or absorb it differently under certain conditions, the amount of light they reflect, known as their spectral reflectance, likewise varies3. Loosely defined, multispectral imaging involves three to six bands. They typically include the broad bands of red, green and blue as well as a narrowband of blue or red, plus the red-edge and near-infrared (NIR). In contrast, hyperspectral imaging involves a greater number of narrower bands — sometimes more than 2,000 of them.

Landsat 1 and its seven successors (Landsat 8 was launched in 2013) have provided researchers and farmers with valuable information and enabled them to establish a normalized difference vegetation index (NDVI). Using the NDVI, which is measured as NIR − red / NIR + red, researchers and farmers can obtain estimates of vegetation water content, biomass, chlorophyll content and crop productivity (Figure 4). The closer the NDVI is to positive 1, the more vegetation there is; whereas the closer the NDVI is to negative 1, the less vegetation there is4. However, spaced-based multispectral imaging does have many limitations.

A TrueNDVI map of a field indicating crop stress.
Figure 4.
A TrueNDVI map of a field indicating crop stress. The normalized difference vegetation index (NDVI) is a classical index in agriculture originally developed for use in Earth-monitoring satellites. Raptor Maps’ TrueNDVI enables this historical data to be compared to drone-based imagery. Courtesy of Raptor Maps.

“With newer technology, we are able to both count individual plants at emergence (when they pop out of the ground) and provide a measure of individual plant health. With older multispectral imaging technology (such as satellites), this would still appear to be a large patch of dirt,” said Nikhil Vadhavkar, the CEO of Raptor Maps Inc., a Boston-based agricultural analytics company that uses UAVs.

Most modern commercial satellites can capture images at a spatial resolution of 0.5 to 2 meters, according to Laurent Bonneau, the manager of Yale University’s Center for Earth Observation. In contrast, the spatial resolution of multispectral images can be 45 mm when taken by a Cessna, 10 to 20 mm when taken by a fixed-wing UAV and 3 mm when taken by a multirotor UAV, according to Price.

Bigger than a monastery garden Precision agriculture largely uses multispectral imaging for damage control, providing what Bonneau called an “early warning of where there is stress in a field.” These crops may be under duress because of pests or disease or insufficient water or nitrogen. According to Sindhuja Sankaran, an assistant professor at Washington State University in Pullman, Wash., HTPP, instead, uses multispectral imaging to gather data on various phenotypic traits such as emergence; plant vigor/greenness; disease resistance rating; water-, heat- and salinity-related abiotic stress tolerance; canopy closure; and yield potential.

“We are just beginning to explore,” said Sankaran, who specializes in agricultural automation engineering.

Just as Mendel needed to monitor more than 20,000 pea plants to statistically prove his theories on plant hybridization, crop breeders need exhaustive amounts of phenotypic data to determine which types of genetically enhanced crops are superior. But modern testing areas are far larger than a monastery garden. By increasing the data-collection rate through UAV-supported multispectral imaging, researchers are able to collect phenotype data on many more genetically enhanced plants, said Alex Thomasson, a professor of biological and agricultural engineering at Texas A&M University in College Station, Texas, who commonly uses a fixed-wing UAV.

“Before aerial and ground-based robotics, phenotyping data were collected manually by graduate students/technicians walking through the field. All aerial data have previously been lacking in resolution for this level of data,” he noted.

Technological advancements and setbacks

Even though multispectral imaging technology designed for drones has made significant advances over the past several years, particularly in size and weight reductions, researchers Thomasson, Sankaran and Price said it is still lacking in many aspects. There is a need, for example, for higher spatial resolution, more spectral bands, faster exposure time and better software for managing images.

“Spectral bands and resolution of the true multispectral sensors have not changed much, but the weight, cost and overall data quality has improved tremendously,” said Philip Ferguson, vice president of development for PrecisionHawk Inc., a Raleigh, N.C.-based remote sensing applications and data processing services provider. “The multispectral sensors we fly now are half the size and one-quarter the weight of the previous sensors.”

Rocky Mountain Instruments - Laser Optics MR

Many of the current shortcomings in UAV multispectral imaging technology are tied to their mapping coverage area and the need to “stitch” hundreds of images together into mosaics. Vadhavkar at Raptor Maps opined about how stitching is “computationally expensive,” but his company has overcome this limitation by leveraging cloud infrastructure, such as Amazon Web Services, “to parallelize this and turn fields around in … hours, as opposed to days.”

Taking images at higher altitudes reduces the need for stitching. But this approach introduces its own unique set of limitations. Thomasson’s research strives for a spatial resolution of 5 mm per pixel, which requires a camera with a large number of detector elements and a short exposure time. At an altitude of 400 ft and a speed of 30 mph, Thomasson said the ideal exposure time would be 0.1 ms to reduce pixel smear, which effectively reduces pixel resolution. In comparison, he said, currently technology under similar conditions operates with a sub-inch spatial resolution and 1-ms exposure time. Another issue is mosaicking errors, such as the appearance in images of stripes, which are artifacts of the mosaicking process (Figure 5).

An image of a cotton field taken by a UAV at an altitude of 400 ft.
Figure 5.
An image of a cotton field taken by a UAV at an altitude of 400 ft. The stripes running from upper right to lower left in the image are artifacts of the mosaicking process. Courtesy of Alex Thomasson.

“The needs for well-defined high-resolution pixels in HTPP are: one, to differentiate sunlit plant parts from shaded plant parts and background (soil and plant residue) so that measurements like, potentially, nitrogen content can be specific to the plants; and two, to distinguish among plant parts so that morphology (lengths and angles [of] leaves, stems, etc.) can be made at a highly detailed level,” said Thomasson.

Hunger for more spectral information

More than anything, demand for more band options is strongest among many people involved in both precision agriculture and HTPP. Ferguson noted that phenotyping demands extremely tight spectral bands.

“Bands, bands and more bands. Our clients’ hunger for more spectral information is insatiable,” Ferguson said.

However, “more bands” does not mean a smorgasbord of 2,000 bands. Instead, Ferguson said, it means “dynamically selectable bands,” ideally in a hyperspectral imager being used in a multispectral mode. Ferguson said an eight- to 10-band sensor “would be a dream today.” He noted it remains a challenge to fit eight quality lenses into the belly of a small UAV.

Pinpointing what discrete bands are needed, through the use of current multispectral imaging technology, can be a difficult task, according to Igno Breukers, chief commercial officer of Quest Innovations BV in Middenmeer, Netherlands. To help researchers and plant breeders identify the narrow bands they need, Quest recently rolled out the Hyperea42, a visible-NIR range hyperspectral camera (Figure 6).

Quest Innovations BV’s Hyperea42, a visible-NIR range hyperspectral camera for both UAV and industrial applications.
Figure 6.
Quest Innovations BV’s Hyperea42, a visible-NIR range hyperspectral camera for both UAV and industrial applications. The three-way, prism-based camera has 42 spectral bands and a range from 470 to 1000 nm, with 10- to 15-nm bandwidth per channel. Courtesy of Quest Innovations.

“It is an ever-evolving science in which, in many cases, it is known that a solution is to be found somewhere in the reflectance correlation between different bands, but it simply isn’t yet known where exactly to look. Hyperspectral imaging has opened those doors to define this,” said Breukers.

Quest’s new three-way, prism-based camera has 42 spectral bands and a range from 470 to 1000 nm, with 10- to 15-nm bandwidth per channel. Breukers said one of the Hyperea42’s targeted customers would be UAV services providers, who can use the camera to look within multiple narrow bandwidths to identify certain reflectance peaks whenever investigating a specific issue.

However, not everyone is clamoring for more bands.

“Having more bands does not necessarily mean better spectral discrimination — in fact the correlation between bands can be extremely high … I have worked for 25 years in the area of hyperspectral image analysis, working with 224 bands and even 2,151 bands, and what I learned is that most of the unique information in all the bands can be explained with three or four bands,” said Price at AgPixel.

Multirotor UAVs are good for low-level hovering, but the weight of their payload can significantly limit flight times. Courtesy of Washington State University.

Figure 7 . (a) Multirotor UAVs are good for low-level hovering, but the weight of their payload can significantly limit flight times. Courtesy of Washington State University. (b) Helicopter UAVs can hover with heavier payloads but are more costly. Courtesy of Quest Innovations. (c) Fixed-wing UAVs have longer flight times and typically fly at higher altitudes than multirotors, meaning the former’s spatial resolution may not be as sharp as the latter’s. Courtesy of PrecisionHawk Inc.

Temporal resolution

Throughout his many years of using hyperspectral imaging, Price said he has never found any “magic bands.” At a time when thousands of bands are available for plant studies, he favors fewer bands in optimal portions of the spectrum, such as red, green and blue for plant pigmentation characterization, and NIR for canopy and leaf structural characterization bands. He also stressed the importance of frequent data collection, or what in remote sensing is referred to as increased temporal resolution. Price noted that plant characteristics change rapidly over the growing season and increased temporal resolution is needed to capture important plant growth stages.

“With plants, the more frequently you can get data, the more valuable it becomes. Plants change rapidly,” he said.

From Mendel to UAVs, this emphasis on frequency of plant assessments has not changed. And with or without higher spatial or spectral resolution, HTPP is something to drone on about.

References

1. Biography.com. Gregor Mendel. www.biography.com/people/gregor-mendel-39282.

2. M. Karkee et al. (November 2014). The state of drones for agriculture. Washington State Grape Society annual meeting, Grandview, Wash. www.grapesociety.org/wp-content/uploads/2015/02/Thurs_AM_3_UASs_ForAg_Karkee_khot.pdf.

3. P. Shippert. Introduction to hyperspectral image analysis. Online Journal of Space Communication, http://spacejournal.ohio.edu/pdf/shippert.pdf.

4. Tetracam Inc. An introduction to multispectral imaging and how growers and other users benefit from this technology. Database abstract, www.tetracam.com/MS%20Database.htm.



UAVs with the right stuff

Multispectral cameras are not the only tools researchers can use to assess the phenotypes of plants. Other technology includes fluorescence sensors, hyperspectral cameras, thermal cameras/sensors, spectrometers, 3D cameras and lidar. In an October 2015 European Journal of Agronomy paper reviewing the variety of UAVs and sensors that have been used in plant phenotyping studies, researchers from Washington State University and the U.S. Department of Agriculture noted that these sensors “can be based on spectral interactions between object and the electromagnetic spectrum such as refectance or emission in visible and infrared regions or time-of-fight of sound/light signals.”

Sensors Chart


The researchers further noted, “The applications of time-of-light based sensors [such as 3D cameras and lidar sensors] are commonly used for evaluating physical/morphological plant characteristics such as plant growth, height, and canopy volume/vigor. These parameters are important in evaluating plant performances during breeding, and can be indicative of yield potential. In regard to the spectroscopic and imaging techniques, a number of plant phenotypes, such as disease susceptibility, susceptibility to drought stress, chlorophyll content, nutrient concentrations, growth rates, and yield potential, can be evaluated (see table).

However, it is important to note that not every type of UAV will be equally effective at deploying each sensor. Factors such as payload and flight time are key considerations when selecting a multirotor, helicopter or fixed-wing UAV (Figure 7).

Published: February 2016
Glossary
multispectral imaging
Multispectral imaging is a technique that involves capturing and analyzing images at multiple discrete spectral bands within the electromagnetic spectrum. Unlike hyperspectral imaging, which acquires data across a continuous range of wavelengths, multispectral imaging is characterized by capturing information at several specific, predefined bands. This allows for the extraction of spectral signatures and information from different parts of the spectrum. Key aspects of multispectral imaging...
hyperspectral imaging
Hyperspectral imaging is an advanced imaging technique that captures and processes information from across the electromagnetic spectrum. Unlike traditional imaging systems that record only a few spectral bands (such as red, green, and blue in visible light), hyperspectral imaging collects data in numerous contiguous bands, covering a wide range of wavelengths. This extended spectral coverage enables detailed analysis and characterization of materials based on their spectral signatures. Key...
unmanned aerial vehicle
An unmanned aerial vehicle (UAV), commonly known as a drone, is an aircraft without a human pilot onboard. UAVs are remotely controlled or autonomously operated, and they can be used for various purposes across different industries. These vehicles range in size from small hobbyist models to large military or commercial drones. Key characteristics of unmanned aerial vehicles include: Remotely piloted or autonomous: UAVs can be operated by a human pilot using a remote control system or, in...
infrared
Infrared (IR) refers to the region of the electromagnetic spectrum with wavelengths longer than those of visible light, but shorter than those of microwaves. The infrared spectrum spans wavelengths roughly between 700 nanometers (nm) and 1 millimeter (mm). It is divided into three main subcategories: Near-infrared (NIR): Wavelengths from approximately 700 nm to 1.4 micrometers (µm). Near-infrared light is often used in telecommunications, as well as in various imaging and sensing...
camerasSensors & DetectorsImagingmultispectral imaginghyperspectral imagingdronesunmanned aerial vehicleUAVPrecision agriculturehigh-throughput plant phenotypingHTPPJames SchlettFiltersAgPixelLandsat 1Raptor MapsQuest Innovationsnormalized difference vegetation indexNDVIinfraredmultirotorfixed-wingAmericasEuropebiotechnologyBiophotonicsFeatures

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.