Search
Menu
Cognex Corp. - Smart Sensor 3-24 GIF LB

Ultrathin TLA Materials Could Broaden IR Applications

Facebook X LinkedIn Email
Ultrathin gratings composed of common materials were shown to increase the absorption efficiency of light to almost 99 percent when thin grooves were etched into the film, directing the light sideways. The semiconductor materials are compatible with optoelectronic applications such as photodetectors and optical modulators, and could make IR technology less expensive and more accessible.

A team comprising researchers from the University of Sydney, Australia National University and University of Technology Sydney began their investigation by examining total light absorption (TLA) in homogeneous ultrathin films, finding that TLA was difficult to achieve in uniform ultrathin layers.

When light falls on a very thin, uniform layer almost all of it is reflected
When light falls on a very thin, uniform layer almost all of it is reflected (right-hand arrows). By etching thin grooves in the film, the light is directed sideways and almost all of it is absorbed (left-hand arrow) even though the amount of material is very small. Insets show electron micrographs of the structuring. The absorbing layer is only 0.041-µm thick. Courtesy of Thomas P. White, Australian National University.

The team then turned their attention to producing ultrathin gratings of common materials. They demonstrated TLA of TE (transverse electromagnetic) polarized light using antimony sulphide (Sb2S3) semiconductor gratings, placed above a metal reflector. They reported that the asymmetric configuration allowed for TLA with only a single incident beam.

The researchers then fabricated a 41-nm-thick antimony sulphide grating structure with a measured absorptance of A = 99.3 percent at the visible wavelength of 591 nm. The results showed that the absorption within the grating was A = 98.7 percent, with only A = 0 .6 percent within the silver mirror. In contrast, a planar reference sample absorbed only A = 7.7 percent at this wavelength.

CASTECH INC - High Precision CNC Polished Aspherical Lenses

The research team also investigated the range of material parameters that might be compatible with TLA in ultrathin gratings. Results showed that ultrathin gratings made of a wide range of weakly absorbing semiconductors could absorb nearly 100 percent of TE-polarized light.

"Conventional absorbers add bulk and cost to the IR detector as well as the need for continuous power to keep the temperature down,” said professor Martijn de Sterke. “The ultrathin absorbers can reduce these drawbacks."

Researcher Björn Sturmberg said the findings did not rely on a particular material but could be applied to many naturally occurring weak absorbers.

"There are many applications that could greatly benefit from perfectly absorbing ultrathin films, ranging from defense and autonomous farming robots to medical tools and consumer electronics," Sturmberg said.

The near-perfect absorption of light in subwavelength thickness layers generally relies on exotic materials, metamaterials or thick metallic gratings. The structures developed by the Australian team are simpler to design and fabricate than existing thin-film light absorbers, which may require complex nanostructures or difficult-to-create combinations of metals and nonmetals, in addition to exotic or metamaterials. High-quality IR detectors cost approximately $100,000 and some require cooling to −200 °C. Significant cost, efficiency and sensitivity gains may be possible from making photodetectors using less material.

The research was published in Optica, a journal of the Optical Society of America (OSA) (doi: 10.1364/optica.3.000556)

Published: June 2016
Glossary
optoelectronic
Pertaining to a device that responds to optical power, emits or modifies optical radiation, or utilizes optical radiation for its internal operation. Any device that functions as an electrical-to-optical or optical-to-electrical transducer. Electro-optic often is used erroneously as a synonym.
photodetector
A photodetector, also known as a photosensor or photodiode, is a device that detects and converts light into an electrical signal. Photodetectors are widely used in various applications, ranging from simple light sensing to more complex tasks such as imaging and communication. Key features and principles of photodetectors include: Light sensing: The primary function of a photodetector is to sense or detect light. When photons (particles of light) strike the active area of the photodetector,...
infrared
Infrared (IR) refers to the region of the electromagnetic spectrum with wavelengths longer than those of visible light, but shorter than those of microwaves. The infrared spectrum spans wavelengths roughly between 700 nanometers (nm) and 1 millimeter (mm). It is divided into three main subcategories: Near-infrared (NIR): Wavelengths from approximately 700 nm to 1.4 micrometers (µm). Near-infrared light is often used in telecommunications, as well as in various imaging and sensing...
thin film
A thin layer of a substance deposited on an insulating base in a vacuum by a microelectronic process. Thin films are most commonly used for antireflection, achromatic beamsplitters, color filters, narrow passband filters, semitransparent mirrors, heat control filters, high reflectivity mirrors, polarizers and reflection filters.
mirrorsResearch & TechnologyAsia-Pacificultrathintotal light absorptionTLAoptoelectronicphotodetectorIRinfraredOpticsphotodetectorsdefenseSensors & DetectorsMaterialsthin filmTest & MeasurementTech Pulse

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.