Search
Menu
Gentec Electro-Optics Inc   - Measure With Gentec Accuracy LB

Laser built on a silicon chip

Facebook X LinkedIn Email
Ashley N. Paddock, [email protected]

A laser with a novel micro-loop mirror design fabricated on a silicon chip uses III-V semiconductor materials – a step forward for high-speed optical communications and interconnects on electronic chips.

Active optical fibers with silicon photonic chips carry much more information for data interconnects than copper cables. Silicon could be the material of choice for wiring lab-on-a-chip devices but for its poor ability to emit light.

Now, scientists at A*Star Data Storage Institute have built a laser on top of a silicon chip, bonding III-V semiconductor materials to the device to provide optical gain. Compared with conventional feedback mirrors based on device facets, the new design promises enhanced operation.

“Integrated Si/III-V lasers can take advantage of low-loss silicon waveguides while addressing the problem of low light-emission efficiency that silicon devices typically have,” said researcher Doris Keh-Ting Ng.


Scanning electron microscope image of the silicon-based microloop mirror. Light entering the waveguide from the left is guided around the loop and directed back into the laser structure. The inset shows the laser spot photographed with an infrared camera. Courtesy of A*Star.



Deposition Sciences Inc. - Difficult Coatings - MR-8/23
Attaching a Si/III-V laser atop silicon requires some difficult fabrication techniques, and device performances can weaken as a result. And because lasers require mirrors to maintain lasing action, such designs typically rely on the interface between air and the semiconductor – the facets of the chip. Unfortunately, such mirrors are not perfect and further reduce operation efficiency.

To improve on the drawbacks associated with mirrors, the team designed the microloop mirror, which guides light emitted from one end of the laser along the waveguide, around a narrow bend and back into the device. The mirror at the other end of the device is still formed by the interface with air so that laser radiation can exit. The scientists achieved a light reflection efficiency of 98 percent with this design.

More than 30 delicate, high-precision fabrication steps were needed to build the device. The researchers plan to further enhance the laser by miniaturizing the device.

“Further improvements, for example, at the interface between the mirror and the lasing structure itself could lead to even better performance,” Ng said. “A laser with lower threshold and higher output power can possibly be achieved, leading to a potential solution to develop high-speed and low-cost optical communications and interconnects on electronics chips.”

The work appeared in Applied Physics Letters.

Published: June 2012
Glossary
optical communications
The transmission and reception of information by optical devices and sensors.
photonics
The technology of generating and harnessing light and other forms of radiant energy whose quantum unit is the photon. The science includes light emission, transmission, deflection, amplification and detection by optical components and instruments, lasers and other light sources, fiber optics, electro-optical instrumentation, related hardware and electronics, and sophisticated systems. The range of applications of photonics extends from energy generation to detection to communications and...
scanning electron microscope
An electron microscope that uses a beam of electrons -- accelerated to high energy and focused on the sample -- to scan the sample surface, ejecting secondary electrons that form the picture of the sample.
A*STARA*Star Data Storage InstituteAsia-PacificCommunicationsdata interconnectsDoris Keh-Ting Ngelectronic chipsfiber opticsIII-V semiconductorlab on a chipmicroloop mirrorMicroscopymirrorsMLMoptical communicationsoptical gainoptical interconnectsOpticsphotonicsResearch & Technologyscanning electron microscopesilicon chipsilicon lasersilicon photonicsSingaporeTech PulseLasers

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.