Search
Menu
Gentec Electro-Optics Inc   - Measure With Gentec Accuracy LB

Laser mixing generates multifrequency light

Facebook X LinkedIn Email
Ashley N. Paddock, [email protected]

A groundbreaking laser mixing technique can manipulate electron-hole collisions to create many frequencies of light simultaneously. This mechanism for ultrafast light modulation has potential applications in high-speed optical communications.

Researchers at the University of California use a free-electron laser aimed at a gallium arsenide nanostructure semiconductor to create a quasiparticle called an exciton, a bound electron-hole pair, in the material. Excitons occur when a semiconductor absorbs a photon. The excess energy excites an electron, causing it to jump into another energy level and to leave behind a positively charged hole in the energy level it left. The electron and hole are bound because of their mutual attraction.


Benjamin Zaks (left) and Mark Sherwin. Courtesy of UCSB.

Normally, the exciton would have a smaller energy than the original electron and hole, but the researchers use a second laser with a lower frequency to smash the electron back into the hole with a greater energy than that with which it left. As a result, the electron-hole recombination emits photons at different frequencies than those it absorbed.

“It’s fairly routine to mix the lasers and get one or two new frequencies, said Mark Sherwin, the lead researcher, a professor at UCSB and director of the university’s Institute for Terahertz Science and Technology. “But to see all these different new frequencies, up to 11 in our experiment, is the exciting phenomenon. I’ve never seen anything like this before.”

Each frequency generated by the electron-hole recollision phenomenon corresponds to a different color, he added.


Artist’s rendition of electron-hole recollision. Near-infrared (amber rods) and terahertz (yellow cones) radiation interact with a semiconductor quantum well (tiles). The near-IR radiation creates excitons (green tiles) consisting of a negative electron and a positive hole (dark-blue tile at center of green tiles) bound in an atomlike state. Intense terahertz fields first pull the electrons (white tiles) away from the hole and then push them back toward it (electron paths represented by blue ellipses). Electrons periodically recollide with holes, creating periodic flashes of light (white disks between amber rods) that are emitted and detected as sidebands. Courtesy of Peter Allen, UCSB.



Deposition Sciences Inc. - Difficult Coatings - MR-8/23
In terms of real-world applications, the technique can be used to transmit more information at a faster rate by sending data through multiple channels – multiplexing – or it can be used for high-speed frequency modulation for a faster Internet.

“Think of your cable Internet,” said Benjamin Zaks, a doctoral student at UCSB and lead author on a paper about the work. “The cable is a bundle of fiber optics, and you’re sending a beam with a wavelength that’s approximately 1.5 microns down the line. But within that beam, there are a lot of frequencies separated by small gaps, like a fine-toothed comb. Information going one way moves on one frequency, and information going another way uses another frequency. You want to have a lot of frequencies available, but not too far from one another.”

Because the laser currently used is the size of a building, the researchers are forced to come up with a more practical way to implement these findings. One solution is to use a transistor that modulates in the near-infrared to produce strong terahertz fields akin to those of the free-electron laser.


Apparatus used for electron-hole recollision experiments. Large flat and curved mirrors guide and focus terahertz radiation, emitted in a different room by one of the UCSB free-electron Lasers, through a round cryostat window onto the sample (not visible). Smaller flat mirrors guide near-infrared radiation from the left, through a small hole barely visible at the center of the curved mirror surface, through a round cryostat window to the sample (not visible). Near-IR laser and sidebands caused by recollisions in the sample exit through a second cryostat window (hidden), are reflected by the small round mirror on the right and directed to a spectrometer (not visible). Courtesy of Alison McElwee, UCSB.


Sherwin hopes that his discovery opens up more electron-hole recollisions research.

“We have a unique tool ... which gives us a big advantage for exploring the properties of fundamental materials. We just put it in front of our laser beams and measure the colors of light going out. Now that we’ve seen this phenomenon, we can start doing the hard work of putting the pieces together on a chip,” he said. “I want to continue working on it, but I’d like to see a lot of other people join in.”

Also contributing to the research, which appears in the online issue of Nature, is R.B. Liu of The Chinese University in Hong Kong.

Published: June 2012
Glossary
exciton
An exciton is a quasiparticle that represents the bound state of an electron and a hole in a solid-state material, typically a semiconductor or an insulator. In simpler terms, an exciton is a paired electron and hole created when an electron absorbs a photon and is promoted to a higher energy state, leaving behind an empty state called a hole. Key characteristics of excitons include: Formation: Excitons are formed when an electron in the valence band of a material is excited to the...
frequency comb
A frequency comb is a precise and regular series of equally spaced spectral lines, or frequencies, that are generated with great accuracy. The term "frequency comb" is often associated with the Nobel Prize-winning technique known as frequency comb spectroscopy, developed by John L. Hall and Theodor W. Hänsch in the 1990s. The technology has since become a powerful tool in various scientific and technological applications. Key points about frequency combs: Origin and development: The...
modulation
In general, changes in one oscillation signal caused by another, such as amplitude or frequency modulation in radio which can be done mechanically or intrinsically with another signal. In optics the term generally is used as a synonym for contrast, particularly when applied to a series of parallel lines and spaces imaged by a lens, and is quantified by the equation: Modulation = (Imax – Imin)/ (Imax + Imin) where Imax and Imin are the maximum and minimum intensity levels of the image.
optical communications
The transmission and reception of information by optical devices and sensors.
photon
A quantum of electromagnetic energy of a single mode; i.e., a single wavelength, direction and polarization. As a unit of energy, each photon equals hn, h being Planck's constant and n, the frequency of the propagating electromagnetic wave. The momentum of the photon in the direction of propagation is hn/c, c being the speed of light.
photonics
The technology of generating and harnessing light and other forms of radiant energy whose quantum unit is the photon. The science includes light emission, transmission, deflection, amplification and detection by optical components and instruments, lasers and other light sources, fiber optics, electro-optical instrumentation, related hardware and electronics, and sophisticated systems. The range of applications of photonics extends from energy generation to detection to communications and...
AmericasAsia-PacificBen ZaksCaliforniaCommunicationsdata transmissionelectron-hole pairselectron-hole recollisionexcitonfiber opticsfree electron laserfrequency combgallium arsenide nanostructureHong KongInternetlaser mixingMark SherwinmodulationMultiplexNatureoptical communicationsphotonphotonicsR.B. LiuResearch & TechnologysemiconductorsspectroscopyTech Pulseterahertz fieldUCSBUniversity of California Santa BarbaraLasers

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.