Photonics Handbook

Diffraction gratings are optical components with a periodic structure that separate light into beams traveling in predictable directions based on their wavelength. The grating acts as the dispersive...

Developed in the early 1990s, the silicon photomultiplier (SiPM) is a solid-state photodetector whose sensitivity to light rivals that of a photomultiplier tube (PMT) in a regime where a few hundred...

Electrical engineers are very familiar with the effects of shot noise, thermal noise, flicker noise and crosstalk, and recognize how these effects can reduce the signal-to-noise ratio (SNR) in their...

Silicon photonics is widely considered a key enabling technology for further development of optical interconnect solutions needed to address growing traffic on the internet. From the first submarine...

Superresolution optical microscopy, for which the Nobel Prize was awarded to Eric Betzig, Stefan Hell, and William Moerner in 2014, has been one of the most momentous developments in the life...

There are three fundamental properties of light: intensity, wavelength, and polarization. Almost all cameras today are designed for monochrome or color imaging. A monochrome camera is used to measure...

Technological advances have resulted in new, higher-quality sensors that enable machine vision cameras to deliver greater features and functionality at a lower cost than ever before. These factors...

Materials processing with lasers is actually a broad term for a diverse range of applications. The major categories of these uses, and the lasers that service them, are summarized Table 1. At one...

Since its first successful operation in 1960 at Hughes Research Labs, the laser technology has been at the center of innovation and research. Semiconductor lasers first made their appearance in 1962...

Many common spectroscopic measurements require the coordinated operation of a detection instrument and light source, as well as data acquisition and processing. Integration of individual components...

By its original definition, a nanopositioning device is a mechanism capable of repeatedly delivering motion in increments as small as one nanometer. Lately demands from industry and research have...

As recently as five years ago, shopping for a microscope light source was fairly straightforward. For routine applications, it was tungsten halogen, typically 100 W, while for fluorescence, it was an...

Flat optics generally perform three main functions: They transmit light (windows), reflect light (mirrors), and fold light (prisms). While most optical manufacturers make spherical and flat optics, a...

Aspheric surfaces are powerful tools that combine the optical corrections of multiple lenses into a single element (Figure 1) and affect performance in ways that spherical optics cannot. For example,...

When purchasing an industrial laser system, the astute buyer will look for a Class 1 laser product — a system where the laser beam hazard is completely enclosed and there is no potential laser...

Single-crystal sapphire has been the material of choice for defense and other applications that require extremely durable optics, but aluminum oxynitride (ALON) and magnesium aluminate (spinel) have...

As you operate your laser, only a portion of the electrical power sourced from your laser driver converts to light energy. The remainder turns to heat, and the buildup of that thermal energy presents...

In general, there are three common approaches to reducing mechanical excitation of photonic systems. The first is identifying the sources of vibration and implementing ways to eliminate or reduce...

Physical Constants & Conversion Factors Length [I] 1 meter (m) = 39.3700 in. = 3.280833 ft = 1.093611 yd 1 kilometer (km) = 0.6213711 mi = 0.53996 nautical mi 1 micron (µm) =...

For rotationally symmetric optical systems, either the lens or the detector moves along the optical axis to maintain optical performance. If the compensating axial motion is accomplished without the...

The use of precision polymer optics is becoming an increasing necessity today as products demand sophisticated light handling components to achieve desired results. Polymer optics can be thought of...

The optical materials selected for an optical system depend upon the application, the required system performance and the environment in which the system is to perform; thus the materials’...

Neodymium-doped crystals and glasses such as Nd:YAG (neodymium:yttrium aluminum garnet) have long been used as laser gain materials. Optically pumped, they produce an output wavelength close to 1...

Any number of medical, industrial, and analytical applications requires the detection of light. Chemiluminescence, bioluminescence, fluorescence, and atomic absorption are just a few, and all require...

Radiometry involves several activities. The two most common are the description and measurement of optical radiation, and, starting with the knowledge of some aspects of optical radiation at one...

A lens collects light from a point on an object and focuses it to a corresponding conjugate point on an image. Under most conditions, the lens fails at this task because of some error in the...

Like other CTDs, the CID imager uses hundreds of thousands (up to 4 million) pixel elements to capture optical images, and converts the light into an electronic charge which may be displayed on a...

Material Coefficient of Expansion(×10-6 per °C) Density (lbs/cubic in.) Aluminum 23.8 0.10 Brass (cast) 18.8 0.30 Carbon (diamond) 1.2 0.25 Carbon (graphite) 7.9 - Copper 16.2 0.32...

Camera resolution depends upon the optical blur diameter and the detector size. Schade combined these to create an equivalent resolution that is a function of Fλ/d where F is the focal ratio,...

Hyperspectral imaging spectroscopy has developed dramatically from a large, complex, remote-sensing satellite- or aircraft-based system into a rugged, compact, economically priced imaging and...

While some design engineers know exactly what they need from their laser diode, others may choose a partner to navigate what can be a complex development process. Laser diode manufacturers know which...

Manufacturing the laser diode is complicated by the existence of multiple proprietary techniques and intellectual property barriers together with complex device physics and unique materials. ...

Spectral selection is a powerful tool that enhances conventional imaging tremendously. Most imaging systems, including the human eye, are designed to image light over a broad range of the spectrum....

There is a growing market for imaging systems that provides an immediate, slow-motion view of a process that allows one to see events that happen too quickly for the human eye to perceive or...

Attentuation Region (or Blocking) The spectral region over which very low transmission is required. Attenuation requirements are generally specified in percent transmission over a given spectral...

Progressive assembly operations such as guiding, gluing and bonding often take place around a static package in three-dimensional space. Integrating the different mechanical systems to ensure that...

Images are produced by many means: cameras, x-ray machines, electron microscopes, radar and ultrasound. They are used in the entertainment, medical, scientific and business industries; for security...

Ultraprecision machining can be defined in general terms as the removal of material from a substrate utilizing a machine tool that operates at a resolution of 10 nm (0.4 μin.) or less. The...

A chart listing angle conversions – Degree, Minute, Second, Radian, Milliradian, Circumference and Quadrant Angle Conversions Angle Conversions degree min sec rad mrad circumference...

Illumination design has developed rapidly to include not only automotive headlamps and street lamps, but also backlit displays, fluorescent panel lighting, light-emitting diode or laser sources, and...

Reflected-ultraviolet imaging is a rather mysterious area of the imaging field. There is relatively little actual UV imagery to be found on the Internet or in the literature compared to near-infrared...

Photonic components are key elements for the information technology (IT). Photonics technology covers the generation of information (cameras, sensors), its transportation (optical communication),...

The common polycrystalline materials used for optical thin-film materials do not satisfy the requirements of telecommunications because of the instabilities caused by moisture absorption in their...

Image intensification, the basis of night vision, is a complex conversion of energy particles that occurs within a vacuum tube. An image-intensifier system works by collecting photons through an...

The basic setup in laser perforation includes a pulsed laser, a lens and either a moving mirror, a rotating web or both. Each laser pulse creates a hole in the material. During the blank time in...

Charged-injection device imagers are metal-oxide semiconductor (MOS) detectors that can be fabricated using PMOS, NMOS and CMOS integrated circuit technology, and may be configured as a...

With a specific gravity of 1.85 g/cm3, beryllium is the lightest metal that is workable. It is 45 percent lighter than aluminum and approximately five times as stiff. Its stiffness to weight ratio...