Photonics Dictionary

Fiber in which both core and cladding are made of plastic.

The direct cladding used for fused silica cores to create large numerical aperture fibers and used as overcoats to glass-clad fibers to reduce microbend loss and increase mechanical protection.

A lens made from transparent plastic material. Lenses over 31/2 in. in diameter are usually machined, ground and polished. Smaller lenses are usually injection molded, the mount surrounding the lens...

The integration of plastic materials into optical applications. When the materials are refined into lenses, prisms and mirrors, they serve the purpose of glass optics at a lower cost and a...

Polishing with a plastic pad.

An optical waveguide having a silica core and a plastic cladding.

Plastic in which the polymer chains become irreversibly joined during molding. The cross-linking can be achieved by heating, chemical agents or irradiation.

A term for thermoplastic optical materials; that is, those in which the polymer chains remain linear after heating and molding and which thus can be remolded again and again, unlike thermoset...

An adhesive whose viscosity decreases as the temperature is increased to a limit. Canada balsam, resin and pitch are examples of thermoplastic cements.

A material used in the jacket of fiber optic cables.

A type of holographic film widely used for industrial applications because it is inexpensive and erasable.

A display device having a thermoplastic film as the control layer medium. The film, moving from a playoff reel, is scanned by an electron gun and melted by an RF heating unit. Deformation of the film...

A highly flame-retardant material used to jacket fiber optic cables, especially on shipboard applications.

3D printing, also known as additive manufacturing (AM), is a manufacturing process that builds three-dimensional objects layer by layer from a digital model. This technology allows the creation of...

Optic surface cleaning liquid that may be applied to glass, crystal, dielectric and metal surfaces; however, may not be applied to plastic and polymer materials.

A thermoplastic or optically transmitting hard plastic produced by applying polymerization initiator and heat to a monomer.

Additive manufacturing (AM), also known as 3D printing, is a manufacturing process that involves creating three-dimensional objects by adding material layer by layer. This is in contrast to...

Commonly known as CR39, this thermosetting plastic is used in the casting of eyeglass lenses because of its toughness and clarity.

An aspheric lens is a type of lens whose surface profiles deviate from the traditional spherical shape. Unlike spherical lenses, which have a constant curvature across their surfaces, aspheric lenses...

An adhesive used to hold optical elements to blocking tools. It is usually a thermoplastic substance such as resin, beeswax, pitch or shellac.

A technique developed by British Telecom in which the viscous drag of air is used to install optical fibers in narrow plastic tubes.

A surface imperfection caused by a polisher running dry too long. It occurs with felt or plastic polishers, and may appear as a reddish brown.

The production of a block by attaching the optical elements to a plate by means of individual buttons of pitch or other thermoplastic material.

A laser having a rare-earth chelate within a plastic host as the lasing material. The chelate laser is easily pumped and has a high quantum efficiency and narrow emission lines.

A transparent powdered solid immersed in a liquid or plastic of similar refractive index but widely different dispersion; used to isolate narrow spectral regions.

The low-refractive-index material that surrounds the core of an optical fiber to contain core light while protecting against surface contaminant scattering. In all-glass fibers, the cladding is...

A colorimeter is a device used to measure and quantify the color characteristics of an object or a light source. It provides objective and standardized color information, typically expressed in terms...

A method of producing large volumes of plastic optical components in which powdered or sheet plastic is pressed between heated dies.

Fine lines, wires or threads used in the focal plane of many optical instruments to point out and locate particular objects in the field of view. They were formerly made from a single strand of...

A cylindrical lens is an optical component that has different curvatures along its two orthogonal axes, resulting in a shape resembling a cylinder. Unlike spherical lenses, which have the same...

Diamond turning, also known as diamond machining or diamond cutting, is a precision machining process used to produce high-quality optical surfaces and components with extremely tight tolerances. It...

Diamond turning refers to a precision machining process used to produce complex optical components, particularly lenses and mirrors, from materials such as metals, plastics, and crystalline materials...

A polarizer that consists of dichroic polarizing material embedded in a plastic sheet, and that transmits light that is almost completely plane polarized with an intensity that is half that of the...

A waveguide made up of a dielectric material, such as plastic or mica, in a cylindrical form, through which the waves travel.

A diffraction grating is an optical component consisting of a surface with a periodic structure of equally spaced, parallel grooves or rulings. These rulings act as an array of closely spaced slits...

An optical diffuser is an optical component or material designed to scatter or diffuse light that passes through it. It is used to create a more even or uniform illumination, reduce glare, or soften...

A material's ability to undergo plastic deformation, specifically elongation, without fracturing.

A camera that records its images electrostatically on plastic tape; used in situations where radiation would have an adverse effect on regular photographic film.

A hologram imprinted on plastic or another medium; e.g., those commonly found on credit cards.

An endoscope is a medical device used for visualizing and examining the interior of hollow organs, body cavities, or confined spaces within the body. It consists of a flexible or rigid tube equipped...

A shield of rubber, plastic or metal used to protect the eyes of the observer from stray light and wind, and to maintain the proper eye distance.

A rigid or flexible, concentrated assembly of glass or plastic fibers used to transmit optical images or light. See aligned bundle; incoherent bundle.

A fiber optic cable assembly refers to a complete unit consisting of optical fibers, connectors, protective jackets, and other components that are assembled together to facilitate the transmission of...