Photonics Dictionary

A panel of photoconductive and electroluminescent layers used as either a positive or negative image intensifier, depending on amplitude and phase of its two power supply voltages. The...

Developing a photographic image by means of an applied electric field. The methods used include electrolysis and photoconductive systems.

An electron-beam lithography (EBL) system is a sophisticated nanofabrication tool used in the semiconductor industry and research laboratories to pattern extremely fine features with sub-micrometer...

A mechanical shutter that has had its timing escapement replaced with an electronic timing circuit. This circuit allows a wider range of exposure times, can be more accurate, and, placed in a circuit...

A process used in document copying and printing that involves the visible rendering of an invisible electrostatic image on a photoconductive material by its treatment with oppositely charged pigment...

Epitaxial refers to the growth of a crystalline layer on a crystalline substrate in such a way that the orientation of the crystal lattice of the growing layer is related to that of the substrate. In...

Epitaxial equipment refers to a set of specialized tools and systems used in the process of epitaxy, which is the growth of crystalline layers on a substrate material. Epitaxial growth is a critical...

A factor, F, indicating the increase in shot noise in an avalanche photodiode as compared with the ideal multiplier, which is noiseless. The noise, which results from variations in avalanche gains,...

An excimer laser is a type of ultraviolet laser that emits short pulses of light in the ultraviolet spectrum. The term excimer is derived from excited dimer, reflecting the nature of the gain medium...

An exciton is a quasiparticle that represents the bound state of an electron and a hole in a solid-state material, typically a semiconductor or an insulator. In simpler terms, an exciton is a paired...

A photodetector composed of a semiconductor material whose responsive properties can be altered by the addition of impurities to the basic material. Copper- and mercury-doped germanium are both...

Photoconductivity due to the addition of impurities or external causes.

A fiber laser is a type of laser in which the active gain medium is an optical fiber doped with rare-earth ions such as erbium, ytterbium, or neodymium. Fiber lasers generate coherent light through...

A fiber optic spectrometer is a device used for measuring the spectral content of light. It utilizes optical fibers to transmit light from a source to a spectrometer unit, where the light is...

Photoconductivity that may be extended as far as the microwave region because of the absorption of photons by electrons.

FTIR (Fourier transform infrared) spectrometer is a powerful analytical instrument used to obtain an infrared spectrum of absorption or emission of a solid, liquid, or gas sample. It operates based...

Fused quartz and silica are closely related materials, both composed primarily of silicon dioxide (SiO2), but they are produced through different manufacturing processes and have distinct properties...

A GaAlAs laser is a type of semiconductor laser diode that emits light in the near-infrared region of the electromagnetic spectrum. It is composed of layers of gallium, aluminum, and arsenic, hence...

Gain-switching is a technique used in lasers to generate short pulses of light by modulating the gain of the laser medium. This method is distinct from Q-switching and mode-locking, two other common...

Germanium crystal refers to a crystalline form of the element germanium (Ge), which is a metalloid and semiconductor commonly used in various electronic and optical applications. Germanium crystals...

A type of photoconductive detector in which germanium, usually doped with boron, gallium and indium, serves as a semiconductor and can detect up to and beyond 100 µm.

A GRIN (gradient index) lens is a type of optical lens that utilizes a gradient in refractive index across its volume rather than having a uniform refractive index like conventional lenses. This...

A photodiode that has been designed so that the bar of semiconductor material has a PN junction perpendicular to its length and an ohmic contact at each of its ends.

A high-speed motion camera, also known as a high-speed camera or slow-motion camera, is a specialized imaging device designed to capture fast-moving events or phenomena at extremely high frame rates....

In semiconductor physics and materials science, the term "III-V materials" refers to compounds composed of elements from group III and group V of the periodic table. More specifically, these...

A modified form of an image-retaining panel that can be used in subdued daylight. This is achieved by adding a layer of zinc oxide between the panel's phosphor layer and its rear electrode. The zinc...

An InGaAs (indium gallium arsenide) camera is a type of imaging device that utilizes InGaAs sensors to capture images in the near-infrared (NIR) spectrum. InGaAs is a semiconductor material that is...

Indium phosphide (InP) is a compound semiconductor material composed of indium (In) and phosphorus (P). It belongs to the III-V group of semiconductors, where elements from groups III and V of the...

An infrared detector is a device that is used to detect and measure infrared radiation, which lies beyond the visible spectrum of light. These detectors are utilized in various applications,...

An infrared light source is a device that emits light in the infrared spectrum, which lies beyond the visible spectrum of light. Infrared light has longer wavelengths than visible light and is...

An infrared light-emitting diode (IR LED) is a semiconductor device that emits infrared light when an electric current passes through it. Similar to standard LEDs that emit visible light, IR LEDs are...

A photoconductor that demonstrates increased conductivity during its exposure to infrared radiation.

A vidicon that has a photoconductive surface that can be excited by infrared radiation.

An InGaAs photodiode refers to a photodetector device that is constructed using a semiconductor material composed of a combination of indium (In), gallium (Ga), and arsenic (As). The term InGaAs...

Integrated photonics is a field of study and technology that involves the integration of optical components, such as lasers, modulators, detectors, and waveguides, on a single chip or substrate. The...

Integration time, in the context of optics, imaging systems, and sensor technology, refers to the duration over which a sensor collects and accumulates incoming light or signal. It is a crucial...

An intensified charge-coupled device (ICCD) camera is an advanced imaging device that combines the capabilities of both an image intensifier and a charge-coupled device (CCD) sensor to achieve...

An interband cascade laser (ICL) is a type of semiconductor laser that operates based on interband transitions between energy bands in a semiconductor material. Unlike traditional semiconductor...

The effect in which photons are absorbed and excite the electrons; the electrons move from the valence band to the conduction band (intrinsic photoeffect), from the valence band to impurity levels or...

The creation of free electrons within a solid by the absorption of a sufficient amount of photons. The effect produces an increase in the conductivity of the solid.

Intravital microscopy is an imaging technique used to visualize biological processes within living organisms, typically in real-time. Unlike traditional microscopy, which involves the examination of...

A photodetector composed of a photoconductive material that, when exposed to radiation, conducts without the aid of added impurities and does not have to be cooled to the level of extrinsic material....

The absorption of a photon raising an electron across the forbidden gap from valence to conduction band of the semiconductor where conductivity is increased and incident radiation may be measured.

Characteristic of radiation detectors that produce energy that is similar to the energy of superconductive gaps when interacting with photons.

Laser active elements typically refers to the substances or materials within a laser system that play a critical role in the amplification of light through the process of stimulated emission. These...

A laser diode module is a compact device that incorporates a laser diode, optics, and often other components into a single package. These modules are designed to provide a convenient and efficient...

In photonics, a lattice refers to a periodic arrangement of optical elements or structures, often on a microscopic or nanoscopic scale. These optical lattices can be created using various techniques...

A thin-film photoconductive cell that is sensitive to the infrared region. The photosensitive material of the cell is composed of lead selenide, and the cell is used in the detection of infrared...

A photoconductive cell having greatest sensitivity in the infrared region. The photosensitive material of the cell is lead sulfide, which is deposited on a glass plate.