Definitions

The large, usually flat surface onto which an image is projected for viewing. May be reflecting or transmitting (rear projection).

The process of perforating a silicon or ceramic substrate with a series of tiny holes along which it will break. Nd:YAG or CO2 lasers are now routinely used.

The process of grinding the convex surface of a convexo-concave meniscus.

The process of grinding the concave surface of a sphero-cylindrical lens.

A self-interference effect that generates random patterns; secondary speckle pattern (SSP) typically occurs in diffuse reflections of a laser on paper, white paint or rough surfaces. By tracking both...

Seidel aberrations refer to a set of monochromatic aberrations in optical systems, named after the German mathematician and physicist Ludwig von Seidel. These aberrations describe deviations from...

A formed piece of glass, one surface of which has been ground and polished to the required curvatures.

A term used to describe a spectacle lens or blank with one surface totally finished.

A projection screen having vertical ribs or flutes set into a plastic surface.

A type of motion-picture camera in which single frames are photographed either automatically at a predetermined rate (as slow as one frame per minute or hour), or whenever the operator presses a key....

A type of color-generating cathode-ray tube that uses a shadow mask, a thin perforated electrode, located close to the display screen. Each hole in the mask coincides with a triad of three phosphor...

A term used to denote a concave surface having too long a radius of curvature. That is, its negative power is too small or low.

A term used to describe a convex surface having too short a radius of curvature. To correct this condition, material is cut from the outer portion of the polishing tool.

Characterizes the significant solar radiation at the surface of the earth, so named because its spectral range extends only from 0.3 to 2.8 µm.

Silicon carbide (SiC) light-emitting diodes (LEDs) are semiconductor devices that emit light when an electric current is applied to them. These LEDs are made using silicon carbide as the...

A material used as a protective layer on an aluminized or silvered mirror. It is evaporated on the mirror as a thin layer, and after exposure to the air the monoxide tends to become silicon dioxide...

Spots in a polished glass surface that are opaque and have a silvery, metallic reflection.

The process, used with a positive photoresist, in which the photoresist is immersed in developing chemicals while being exposed to the optical pattern. The newly exposed surface is continuously...

Single-molecule Förster resonance energy transfer (smFRET) is a specialized technique in biophysics and molecular biology used to study the distances and dynamic interactions between two...

A single-photon avalanche diode (SPAD) is a specialized type of photodetector designed to detect extremely weak optical signals, down to the level of single photons. SPADs are widely used in...

The process of making an abrupt break in a spherical surface on a spectacle lens so that a new center of curvature is set for a portion of the lens. This has the effect of adding a prism to that...

A crystal, glass, or quartz slicing and cutting machine is a specialized piece of equipment used in the manufacturing process to precisely cut and slice materials such as crystals, glass, and quartz...

Structural surfaces that incorporate an embedded sensor network capable of detecting flaws within the structure.

A transmission interference microscope that produces interference patterns of a sample by using birefringent plates that split a polarized beam of light into ordinary and extraordinary rays, then...

The incident ray, the normal to the refracting surface at the point of incidence of the ray at the surface, and the refracted ray all lie in a single plane. The ratio of the sine of the angle between...

The letter form used on visual performance test charts. The overall letter height is equal to five times the thickness of individual strokes. Normal 20/20 vision is represented by the ability to...

A device for converting sunlight into electrical energy, consisting of a sandwich of P-type and N-type semiconducting wafers. A photon with sufficient energy striking the cell can dislodge an...

Solar radiation intensity existing in free space at the mean solar distance of the Earth. Commonly expressed in g cal cm-2min-1, the constant is equal to the amount of incident radiation -- in unit...

A solar simulator is a device used to replicate the spectrum and intensity of sunlight in a controlled environment for testing and research purposes. Solar simulators are employed in various...

Device that uses a coherent reference wave to record the interference patterns produced by incident ultrasonic waves on an object.

Spatial resolution refers to the level of detail or granularity in an image or a spatial dataset. It is a measure of the smallest discernible or resolvable features in the spatial domain, typically...

Spatially offset Raman spectroscopy (SORS) is a technique that extends traditional Raman spectroscopy by incorporating measurements at different spatial offsets. This method allows for the selective...

Of evaporative coatings, a condition resulting when small chunks of material fly from the hot crucible onto the substrate surface and adhere there.

Refers to the variety of techniques that use the interference pattern produced by laser light diffusely reflected by an object. There are two basic techniques: direct laser photography, used when...

A power intensity pattern produced by the mutual interference of partially coherent beams that are subject to minute temporal and spatial fluctuations.

Spectral domain optical coherence tomography is an imaging technique used in medical diagnostics, particularly in ophthalmology, to visualize and analyze the internal structures of biological...

Spectral repeatability refers to the consistency and reproducibility of spectral measurements across multiple trials or instances. It is a measure of how well a measurement instrument or system can...

A spectral signature, in the context of remote sensing and spectroscopy, refers to the unique pattern or characteristic spectral response of a material or object across different wavelengths of the...

An instrument in which an image of the sun is scanned by the entrance slit of a monochromator, the exit slit simultaneously scanning a photographic plate for analysis of the solar spectral lines. If...

An instrument similar to the spectroheliograph, but having a scanning method that is performed by a pair of rapidly oscillating slits or a rotating glass block located before a pair of fixed slits at...

A spheric lens, also known as a spherical lens, is a type of optical lens with at least one surface that is part of a sphere. This means that the lens surface is curved in a symmetrical manner,...

Spherical aberration is an optical aberration that occurs when light rays passing through a lens or curved optical surface do not converge or diverge to a single focal point. Instead of focusing to a...

A lens or lens surface that is a combination of a sphere and cylinder.

An instrument for measuring the radius of curvature of a spherical lens or mirror surface. It may consist of a ring resting on the surface, with a micrometer plunger in the middle of the ring to...

A defect in the cleaved end face of an optical fiber in which the surface changes abruptly.