Photonics Dictionary: S

An array of active optical devices (modulators, laser diodes and/or detectors), each of whose electrical inputs or outputs are directly connected to electronic logic circuits, which also are a part...

An electric discharge lamp in which the conducting vapor is that of metallic sodium instead of the usual mercury. It emits a strong yellow light of a single wavelength.

A term describing an antireflection coating that may be applied to optics that cannot tolerate the high temperatures usually required for normal "hard'' coatings. Such coatings lack durability...

A device for converting sunlight into electrical energy, consisting of a sandwich of P-type and N-type semiconducting wafers. A photon with sufficient energy striking the cell can dislodge an...

Solar radiation intensity existing in free space at the mean solar distance of the Earth. Commonly expressed in g cal cm-2min-1, the constant is equal to the amount of incident radiation -- in unit...

A laser pumped by solar radiation focused by mirrors.

A solar simulator is a device used to replicate the spectrum and intensity of sunlight in a controlled environment for testing and research purposes. Solar simulators are employed in various...

An optical compensator similar to the Babinet compensator, but which produces a phase-change consistent throughout its field, as opposed to the Babinet's phase-change, which occurs progressively...

In micropositioning, a remote positioning device in which an electric current drives a movable armature mounted on an electromagnetic coil.

A solid-state laser is a type of laser that uses a solid gain medium (as opposed to a liquid or gas) to produce coherent light. The term "solid-state" refers to the fact that the active medium, where...

A photographic objective that uses the thick meniscus principle to obtain its power. It is designed to photograph small fields at large apertures.

Calculated at a given point in a medium as the instantaneous pressure at that point in the presence of a sound wave, minus static pressure at that point.

A spatial light modulator (SLM) is an optical device that modulates or manipulates the amplitude, phase, or polarization of light in two dimensions, typically in the form of an array. SLMs are...

Spatial resolution refers to the level of detail or granularity in an image or a spatial dataset. It is a measure of the smallest discernible or resolvable features in the spatial domain, typically...

Spatially offset Raman spectroscopy (SORS) is a technique that extends traditional Raman spectroscopy by incorporating measurements at different spatial offsets. This method allows for the selective...

Spectral domain optical coherence tomography is an imaging technique used in medical diagnostics, particularly in ophthalmology, to visualize and analyze the internal structures of biological...

Spectral flow cytometry is an advanced flow cytometry technique that expands the capabilities of traditional flow cytometry by utilizing spectral information from fluorochromes to enhance...

Ratio of the radiant flux at a particular wavelength lm to that at any other wavelength l, such that both radiations produce equally intense luminous sensations. The wavelength lm is chosen so that...

Spectral repeatability refers to the consistency and reproducibility of spectral measurements across multiple trials or instances. It is a measure of how well a measurement instrument or system can...

A classification of particular regularities that occur in the spectra of many atoms.

A spectral signature, in the context of remote sensing and spectroscopy, refers to the unique pattern or characteristic spectral response of a material or object across different wavelengths of the...

Equipment used for chemical analysis by investigation of the spectra formed and observed in chemical activity. Of particular use are spectrographs for recording the emission spectra of substances...

Spectra can be conveniently recorded on photographic film or plates. The portions that are occupied by regions of the recorded developed images on the film or plate can be determined with some...

A kind of spectrograph in which some form of detector, other than a photographic film, is used to measure the distribution of radiation in a particular wavelength region.

Gas detection measurement technique that uses a built-in capacitative microphone to calculate the amount of absorbed laser power in a gas cell according to variations of gas pressure.

A spectrophotometer is a scientific instrument used to measure the intensity of light at various wavelengths in the electromagnetic spectrum, typically in the visible and ultraviolet regions. It is...

A spectroradiometer is a device used to measure the intensity of light at different wavelengths across the electromagnetic spectrum. It provides a detailed spectral distribution of light, breaking...

Spectroscopy is a technique used in the study of interactions between matter and electromagnetic radiation. It involves measuring and analyzing how different materials absorb, emit, or scatter light,...

A spheric lens, also known as a spherical lens, is a type of optical lens with at least one surface that is part of a sphere. This means that the lens surface is curved in a symmetrical manner,...

Spherical aberration is an optical aberration that occurs when light rays passing through a lens or curved optical surface do not converge or diverge to a single focal point. Instead of focusing to a...

A tiny lens (as small as 100 µm in diameter) used to focus light on charge-coupled devices, formed by heating a photosensitive material exposed through a mask, leaving a pattern of raised...

An instrument for measuring the radius of curvature of a spherical lens or mirror surface. It may consist of a ring resting on the surface, with a micrometer plunger in the middle of the ring to...

Reciprocal magnetic interaction between nuclei in a molecular system facilitated by the binding electrons of the molecule.

A container which secures multiple splice trays and protects the trays and their contents from damage.

A close-up lens, semicircular in shape, that is mounted in front of a conventional lens focused at infinity. The result is an image made up of two sections; one focused through the split lens on near...

A mask-alignment microscope used to produce and inspect microcircuits in the electronics industry. It provides flat-field, distortion-free images at all magnifications with a high-intensity vertical...

A phenomenon that causes the details in an image to appear at a spatial frequency higher than that at which the contrast first drops to zero. A phase reversal will accompany this phenomenon, often...

A vacuum deposition method in which the coating material (target) is removed from the surface of the coating source (cathode) by ion bombardment and deposited upon the substrates.

Sputtering equipment is machinery used in the process of physical vapor deposition (PVD), specifically sputtering. Sputtering is a method of depositing thin films of material onto a substrate surface...

A sputtering target is a solid material used in the process of physical vapor deposition (PVD), specifically sputtering. Sputtering targets are typically made of metals, metal alloys, or compounds...

A type of laser used when a great amount of power is required. Avoiding the bulk of large numbers of optical lenses, this instrument offers high-output intensity and a small emitting region at...

In infrared imaging systems used for mass screening of printed circuit boards or other quality control applications, an image of an ideal component that is stored in the system's memory and then...

STED microscopy, or stimulated emission depletion microscopy, is a superresolution imaging technique in fluorescence microscopy that surpasses the diffraction limit, enabling the visualization of...

A type of camera that has scales or other arrangements by which successive exposures can be lined up and equally spaced on a sheet of film. It is used in the preparation of microfiche copies of...

A projection printer that is capable of reproducing a multiplicity of images from a master transparency on a single support coated with a photosensitive layer by indexing the receiving material from...

A method of creating real three-dimensional models by using lasers driven by CAD software. In contrast to the normal practice of removing material, this process polymerizes a liquid to quickly...

Wide-field, low-magnification device that consists of two compound microscopes focused on a single object, producing an erect three-dimensional image.

The perception of depth due to binocular vision.