Definitions

The minimum energy required to induce atomic and molecular separation or displacement due to incident intense laser irradiation.

The minimum value of luminance for vision. The value may vary with age as well as dark adaption period. (Measured range approximately log luminance -3 through 2.) About 10 -2 ml at the fovea, 10 -5...

Least value of color value combinations which gives white light; minimum purity as determined to be white.

The angular subtense of the field of view in the image space of a telescope, as differentiated from that in the object space (the true field).

A receiver for optical communications systems consisting of a symmetric binary, pulse-code-modulated transmitter, a log-normal channel and an array of independent photocounting detectors that yield...

Degradation factor in coherent light systems where the amplitude of the recorded signal is decreased as the number of object points is increased, resulting in poor noise performance.

An imaging technique that labels all gray pixels as either black or white before processing begins.

The absolute luminance threshold for detection by the two eyes.

The illumination generally used in microscopy, whereby the specimen appears dark against a light background.

An optical image having a brightly lit background.

Brightfield refers to a type of microscopy and imaging technique in which the specimen is illuminated with a white light source, and the image is observed or captured against a bright background. In...

Cold atoms refer to atoms that have been cooled to extremely low temperatures, typically in the microkelvin (µK) to nanokelvin (nK) range, close to absolute zero (0 Kelvin or -273.15°C). At...

A cathode that emits electrons, not with the influence of heat radiation, but by means of a high-voltage gradient at its surface.

A method of applying antireflection coatings to optics that avoids the elevated temperatures normally used. A cold coating will not be as durable as a normal coating.

A cryogenically cooled component incorporated into the Dewar of an infrared detector assembly to maintain the sensing elements at the proper temperature (77 K or colder).

Deformation of a material caused by mechanical factors, especially constant pressure, and not attributable to thermal effects.

A mirror whose coating serves to reflect visible radiation while transmitting the infrared.

That part of an infrared detector-Dewar assembly that limits the solid angle viewed by the sensor; it is maintained at a uniformly cold temperature so that no thermal energy is emitted. Also known as...

The application of coating without heating of the substrates.

A means of illumination from which the infrared component has been removed by absorption or reflection filters within the condenser system.

A method of producing large volumes of plastic optical components in which powdered or sheet plastic is pressed between heated dies.

A type of laser welding of thin materials using a defocused or low-power carbon dioxide laser beam. The energy is absorbed by the material through conduction and melts the material to produce an edge...

That contrast level that exists between two areas whose difference in brightness is just perceivable.

The electrostatic field acting locally within a crystal as a result of the microscopic arrangement of atoms and ions in the lattice.

A lens aberration that causes a flat object surface to be imaged onto a curved surface rather than a plane.

A condenser that forms a hollow cone-shaped beam of light with its focal point in the plane of the specimen. If it is used with an objective having a numerical aperture lower than the minimum...

A disc contained within an electronic cell counter for regulating light transmission.

The transmission of light by a condenser to observe either very small particles or very fine lines with a microscope.

A technique whereby the sample is illuminated by a hollow cone of light larger than the acceptance angle of the objective, so that only scattered light is seen, revealing any irregularities of the...

A photomicrographic recording technique that utilizes dark-field illumination to render an image of an object having a refractive index much like that of the medium holding it. The object may be...

The distance, on either side of the object plane focused on, through which satisfactory image definition can be obtained. For the special case of an imaging system with lens axis perpindicular to the...

The minimum of change in stimulation needed to effect an awareness of change in sensation that is statistically determined.

A high-frequency approach to the propagation of light in graded-index fibers in which the modal field is represented in terms of an inhomogeneous (evanescent) plane wave with a complex phase, so that...

The diffraction pattern of a source such as a light-emitting diode, injection laser diode or the output end of an optical waveguide observed at an infinite distance from the source.

A region far from an aperture or source where the diffraction pattern is essentially the same as that at infinity. Changes in diffraction patterns of points within the far-field region are...

A plate consisting of fused optical fibers with both surfaces ground and polished, and having the entrance surface curved to match the image curvature of the input lens system. The plate transmits to...

1. In raster scan television, one of the two scans that are interlaced to make up a frame. 2. See field of view.

A photodetector employing photoregeneration of carriers in the channel region of an FET structure to provide photodetection with current gain.

An X-Y electrically addressable series of arrays with individual electron emitters bombarding a phosphor-coated transparent plate. The phosphor is induced into luminescence, similar to traditional...

An image-forming instrument in which a strong electrostatic field causes cold emission of electrons from a sharply rounded point or from an object that is located on that point. The electrons are...

A handheld binocular telescope that is commonly of the Galilean type.

An extremely powerful microscope that renders individual ionized atoms visible by using an electric field to propel the ions to a fluorescent screen where they are magnified.

1. A lens situated at or near the plane of an internal image to project the aperture of a previous objective or erector upon the aperture of a following lens. 2. A lens at or near the plane of a...

An expression of the tolerance of decentration of a laser diode from the optical axis: the region around the axis in the focal plane of the collimator in which the facet can be located and still...

The field of view (FOV) refers to the extent of the observable world or the visible area that can be seen at any given moment through a device, such as an optical instrument, camera, or sensor. It is...

Intensity of emission as a function of direction in a given plane.