Photonics Dictionary: F

A device used to transmit and receive images that have been converted to electrical signals over regular telephone lines; it includes a scanner, a transmitter, a receiver and a printer.

The reproduction of a picture or image, produced by scanning the image and converting it into electrical signals that carry the image to be reproduced. Also known as fax.

Measurement of the interval during which a photodetector's signal and output current drops from 90 to 10 percent.

The simultaneous collection of two or more signals at a single location. In a digital computer, it refers to the number of inputs that can be accommodated by a particular logic circuit.

The distribution of one signal to more than one location. In a digital computer, it refers to the number of outputs that can be fed by a particular logic circuit.

To supply a signal to some point.

A system designed to control the output quantity of a device by returning a portion of its output signal to its input. This results in the manipulation of the input quantity so that the desired...

A waveguide or coaxial cable that transmits a signal from an antenna to a receiver or from a transmitter to an antenna.

The signal-to-noise ratio (SNR) obtained with a Fourier transform spectrometer when detector noise prevails, which exceeds the SNR of a scanning spectrometer in the same time by a factor proportional...

A femtosecond laser is a type of laser that emits ultrashort pulses of light with durations on the order of femtoseconds, where one femtosecond is equal to 10-15 seconds. These lasers are capable of...

A fiber Bragg grating (FBG) is a type of optical filter that is inscribed or "written" into the core of an optical fiber. It consists of a periodic modulation of the refractive index along the length...

Fiber joints, also known as fiber optic splices, refer to the connection points where two optical fibers are permanently joined together to form a continuous optical transmission path. These joints...

A fiber laser is a type of laser in which the active gain medium is an optical fiber doped with rare-earth ions such as erbium, ytterbium, or neodymium. Fiber lasers generate coherent light through...

A fiber optic cable assembly refers to a complete unit consisting of optical fibers, connectors, protective jackets, and other components that are assembled together to facilitate the transmission of...

A fiber optic gyroscope (FOG) is a type of gyroscope that uses the interference of light waves to detect changes in orientation or rotation. It operates based on the principle of the Sagnac effect,...

A fiber optic spectrometer is a device used for measuring the spectral content of light. It utilizes optical fibers to transmit light from a source to a spectrometer unit, where the light is...

A fiber optic transceiver, often simply referred to as an "optical transceiver," is a device used in fiber optic communications to transmit and receive data over optical fibers. It integrates both a...

A fiber-coupled photoconductive antenna (FCPA) is a type of optoelectronic device that combines a photoconductive antenna with optical fibers for the purpose of generating or detecting terahertz...

The process by which the light from the images of photographic film is encoded into electrical signals for video transmission.

Any noise with a power spectral density that is the inverse of the signal's frequency and is therefore most significant for low-frequency signals. It can be expressed as 1/f and is therefore also...

A microscope that uses a flying spot scanner, directed through the eyepiece, as a light source to determine the features of a transparent specimen. The flying spot is modulated by the varying density...

A device used to scan, with a small, intensely bright spot, portions of a picture surface and to transform the original picture into a series of electrical signals. In optical character recognition,...

FMCW lidar stands for frequency-modulated continuous wave lidar. It is a type of lidar (light detection and ranging) technology used for remote sensing, distance measurement, and 3D mapping. FMCW...

Förster resonance energy transfer (FRET) is a mechanism describing the transfer of energy between two closely spaced fluorescent molecules. This phenomenon is named after the German scientist...

A phenomenon that occurs in WDM and DWDM systems when three closely spaced signal wavelengths near the zero-dispersion wavelength interact with each other, producing a fourth wavelength that...

An instrument using a Michelson interferometer, a beamsplitter, two plane mirrors and a detector to give Fourier analysis of the detector signal to provide the desired spectrum.

Any of the various methods of decomposing a signal into a set of coefficients of orthogonal waveforms (trigonometric functions).

A type of internal photonic connection in an integrated circuit in which a holographic grating is used to focus light at points on a silicon chip, maximizing the speed of signal propagation.

Free-space optics (FSO), also known as optical wireless communication or optical wireless networking, refers to the transmission of data using modulated beams of light through free space (air or a...

The frequency domain is a concept used in signal processing and analysis to represent signals and data in terms of their frequency components. In contrast to the time domain, where signals are...

In communcations and video signals, the portion of a composite signal between the leading edge of the horizontal blanking pulse and the leading edge of the horizontal synchronization pulse.

FTIR (Fourier transform infrared) spectrometer is a powerful analytical instrument used to obtain an infrared spectrum of absorption or emission of a solid, liquid, or gas sample. It operates based...

The full width at half maximum (FWHM) is a measure used in various fields, particularly in spectroscopy, signal processing, and imaging, to characterize the width or extent of a distribution, peak,...