Photonics Dictionary: L

A small half-shade analyzer placed in the eyepiece of a polarimeter to determine the character of the polarized light emitted by the instrument. It consists of a Nicol prism situated so that it...

A lab-on-a-chip (LOC) is a miniaturized device that integrates various laboratory functions and capabilities onto a single, compact chip. Also known as microfluidic devices, lab-on-a-chip systems are...

Flux per unit solid angle leaving a surface in any direction is proportional to the cosine of the angle between that direction and the normal to the surface. A material that obeys Lambert's cosine...

An endoscopic surgical instrument that includes a channel for the introduction of supplementary instruments.

Laser active elements typically refers to the substances or materials within a laser system that play a critical role in the amplification of light through the process of stimulated emission. These...

Laser annealing is a process that involves using a laser beam to heat and modify the microstructure of a material, typically a thin film or surface layer, with the objective of improving its...

A laser cavity, also known as an optical cavity or resonator, is a fundamental component of a laser system. It is a confined region or space where light undergoes multiple reflections, leading to the...

A laser crystal, also known as an active medium or gain medium, is a solid-state material used in the construction of lasers. The primary function of the laser crystal is to amplify light by...

A laser diode module is a compact device that incorporates a laser diode, optics, and often other components into a single package. These modules are designed to provide a convenient and efficient...

Laser drift typically refers to a phenomenon where the frequency or wavelength of a laser source gradually changes over time. In the context of lasers, stability in terms of frequency or wavelength...

Laser lithotripsy is a medical procedure that uses laser energy to break down or fragment stones in various parts of the body, particularly in the urinary and biliary systems. The term "lithotripsy"...

Laser marking is a process in which a laser beam is used to mark or engrave a surface by altering its properties or appearance. This technique is widely used for labeling, identification, and...

The laser output refers to the generated and emitted light produced by a laser system. This output is characterized by several key properties that distinguish lasers from other light sources. These...

Laser peening is a surface enhancement technique used to improve the mechanical properties of materials, particularly metals. It involves the use of high-energy laser pulses to generate shockwaves on...

Handheld optical laser device containing a semiconductor or DPSS source. The output is corrected via internal collimating optics. For typical use the output is reduced to eyesafe operation power. (5...

Laser sintering is an additive manufacturing (AM) or 3D printing technology that involves using a laser to selectively fuse powdered materials, typically polymers or metals, layer by layer, to create...

Laser texturing is a manufacturing process that involves using a laser beam to selectively modify the surface of a material, creating textures, patterns, or microstructures. This technique is...

A laser, which stands for "light amplification by stimulated emission of radiation," is a device that produces coherent and focused beams of light through the process of optical amplification based...

Laser-induced fluorescence (LIF) is a spectroscopic technique that involves using a laser to excite molecules or atoms, leading to their emission of fluorescence light. This technique is widely used...

Laser-mediated gene transfer refers to a technique in molecular biology and genetic engineering that utilizes lasers to introduce genetic material into cells. This method is a type of gene delivery...

In photonics, a lattice refers to a periodic arrangement of optical elements or structures, often on a microscopic or nanoscopic scale. These optical lattices can be created using various techniques...

In physics, the law of reversibility is often associated with the concept of reversibility in thermodynamics. The law asserts that any process that occurs in a closed system can, in theory, be...

A lens blank is a piece of optical material in a raw, unfinished state, typically in the form of a disk or block, from which lenses are eventually fabricated. Lens blanks are made from various...

A lens is a transparent optical device that focuses or diverges light, allowing it to pass through and form an image. Lenses are commonly used in optical systems, such as cameras, telescopes,...

Lensless microscopy, also known as computational or holographic microscopy, is an imaging technique that captures and reconstructs microscopic images without the use of traditional lenses. Instead of...

A type of stereoscopic photography in which a pair of lenses focuses a pair of images, relative to the positions of the two eyes, onto film through a lenticular screen, which records the images as an...

Lidar, short for light detection and ranging, is a remote sensing technology that uses laser light to measure distances and generate precise, three-dimensional information about the shape and...

Light diffusion refers to the process by which light is scattered or spread out in various directions as it interacts with a medium or material. Unlike direct transmission through a transparent...

LiFi, short for light fidelity, is a wireless communication technology that utilizes visible light or infrared light to transmit data. Developed as an alternative or complementary technology to...

The term light field refers to the spatial distribution of light rays traveling in all directions through a given space. It includes information about the intensity and direction of light rays at...

The spectroscopic analysis of optical line shapes and frequency shifts, using the technique of light beating; i.e., the mixing of two narrowband optical components to produce an AC component in the...

An LED, or light emitting diode, is a semiconductor device that emits light when an electric current passes through it. LEDs are widely used in various applications due to their energy efficiency,...

Line scan refers to a method of capturing images or data by scanning a single line at a time, as opposed to capturing the entire image simultaneously. This technique is commonly used in various...

A linear image sensor is a type of solid-state electronic device used to capture and convert light into electrical signals. Unlike area image sensors (such as CCD or CMOS sensors), which capture an...

A linear positioning stage, also known as a linear stage or translation stage, is a precision mechanical device used to accurately move and position objects along a linear axis. These stages are...

Linear receive optics typically refers to the optical components and systems used in the reception (detection) of linearly polarized light signals in various applications, such as optical...

A liquid crystal light valve (LCLV), also known as a spatial light modulator (SLM), is an optical device that modulates the intensity, phase, or polarization of light passing through it using liquid...

Liquid crystal on silicon (LCoS) is a display technology that combines liquid crystal materials with silicon-based semiconductor technology to create high-resolution, high-quality images. LCoS...

Lithography is a key process used in microfabrication and semiconductor manufacturing to create intricate patterns on the surface of substrates, typically silicon wafers. It involves the transfer of...

A lock-in amplifier is a specialized electronic instrument used to extract and measure small signals embedded in noise or interference. It is particularly useful in fields such as spectroscopy,...

A long-pass filter is an optical filter that allows longer wavelengths of light to pass through while blocking or attenuating shorter wavelengths. These filters are designed to transmit light with a...

Long-wave infrared (LWIR) refers to a specific range of the infrared spectrum. Infrared radiation is divided into three main categories based on wavelength: near-infrared (NIR), mid-wave infrared...

Low Earth orbit (LEO) refers to a region in space that is relatively close to Earth's surface, typically characterized by altitudes ranging from approximately 180 to 2,000 kilometers (112 to 1,242...

A high-resolution spectroscopic device commonly used in the early 20th century as a component of double-beam interferometers. Light introduced at one end of the plane-parallel glass plate will be...