Photonics Dictionary: T

A terahertz spectrometer is a scientific instrument used to measure and analyze the properties of materials in the terahertz frequency range, typically spanning from about 0.1 to 10 terahertz (THz),...

The effect that characterizes an intense laser beam that is passed through an absorbing medium, causing the absorbed energy to produce density changes that can alter the intensity distribution of the...

Thin-film coatings are layers of material applied to the surface of an object or substrate, typically to modify its optical, electrical, or mechanical properties. These coatings are composed of thin...

In laser damage testing, the exposure of many sites of a sample to different intensities of laser irradiation to discover the point at which the laser induces failure of the material.

Although low in sensitivity (approximately 10-7 m for helium-neon lasers), this holographic technique permits quantitative assessment of entire vibratory patterns of given structures in a single...

Time-correlated single photon counting (TCSPC) is a technique used in photon counting applications, particularly in the field of experimental physics, biophysics, and fluorescence lifetime imaging...

A time-to-amplitude converter (TAC) is an electronic circuit that converts a time interval between two events into an amplitude or voltage signal. TACs are commonly used in various scientific and...

Tip-enhanced Raman scattering (TERS) is a powerful technique that combines Raman spectroscopy with the enhanced spatial resolution provided by a sharp metallic or dielectric tip. TERS allows...

A Ti:sapphire laser is a type of solid-state laser that utilizes a titanium-doped sapphire crystal as the gain medium. The name Ti:sapphire comes from the combination of titanium (Ti) as the dopant...

In the context of optics and lasers, a transverse mode refers to a specific spatial pattern of the electric field within the cross-section of a laser beam. These modes represent the different...

Abbreviated TEA CO2 laser. A gas laser that provides shorter pulses and higher peak powers than conventional CO2 lasers. The electrical excitation pulse occurs transversely to the optical axis...

A tool used in cutting circular holes around a center. Also, a laser cutter in which the beam moves in relation to the cut surface.

Two-photon polymerization (TPP) is a technique used in additive manufacturing, specifically in the field of 3D printing. It involves using a focused laser to polymerize a photosensitive material in a...