Photonics Dictionary: V

A vacuum chamber is a sealed enclosure from which air and other gases are removed to create a low-pressure environment, typically close to or at a complete vacuum. These chambers are often...

A phototube that functions within a vacuum and thus eliminates the effects of gaseous ionization on its electrical properties.

A spectrograph that functions in a vacuum and therefore eliminates any air-absorption of the emission being surveyed.

Any source that emits radiation of wavelengths between 100 and 300 nm. Instruments used to study these sources must be evacuated, as vacuum ultraviolet does not travel freely in air.

A method of spectral analysis using wavelengths between 100 and 300 nm that utilizes both emission and absorption techniques.

Van der Waals forces refer to the attractive or repulsive forces between molecules (or parts of molecules) that arise from fluctuations in electron distribution. These forces are relatively weak...

Lasers based on neodymium-doped yttrium or gadolinium vanadate crystals. These include yttrium vanadate (Nd:YVO4), gadolinium vanadate (Nd:GdVO4), and lutetium vanadate (Nd:LuVO4). Vanadate lasers...

A semiconductor diode that exhibits change in capacitance with a change in applied voltage; used as a voltage-variable capacitor.

An Abbe condenser in which the upper lens element is fixed. The lower lens may focus the illumination between the elements so that it emerges from the fixed lens as a large-diameter parallel bundle....

A lens assembly containing several movable elements to permit changing of the effective focal length (EFL). Unlike a zoom lens, a variable-focus lens may require refocusing with each change of EFL....

With respect to a television system, a pulse transmitted at the end of each field to break off the cathode-ray beam as it begins the next field.

A laser that has a surface-emitting semiconductor gain element coupled to an external mirror designed to complete the laser resonator. VECSELs can be electrically or optically pumped. The extended...

With respect to microscopy, light that is directed down through the objective onto the specimen and then returned by reflection.

A two-sided mirror suspended by a pendulum mechanism. An autocollimator set normal to such a mirror surface will, by definition, have its optical axis set horizontal.

With respect to microscopy, light that is directed through the specimen by a substage condenser.

A type of surface-emitting laser diode that uses dielectric mirrors to produce surface emission. The laser cavity is established in a vertical direction with respect to the plane of the active region.

Consists of a pair of radio telescopes concentrated on a single celestial object. This technique creates a single radio telescope with a diameter equal to the distance between the pair, which allows...

An image with variations in density due to the differential scattering ability of microscopic bubbles in a transparent layer.

A vibrational transition refers to a change in the vibrational energy of a molecule. Molecules consist of atoms that are connected by chemical bonds, and these atoms are not stationary but are in...

A test similar to the Knoop hardness test, but used for fractured material. The indenter is a square-based pyramid-shaped diamond.

A device, such as a thermionic or crystal diode, that is introduced into the vision channel of a television receiver to select the signal from the intermediate-frequency carrier.

The observation of specimens by a microscope linked to a television camera and an image processor.

Videography refers to the process of capturing moving images and recording them in a digital format. It involves the use of video cameras, lighting equipment, and audio recording devices to create...

A camera that permits adjustments in the perspective of an image; this is accomplished by the camera design, which permits tilt, swing, rise or fall of the image transmitted. Also known as a...

In an optical system, the gradual reduction of image illuminance as the off-axis angle increases, resulting from limitations of the clear apertures of elements within the system.

Virtual histology refers to the use of digital technology and computational methods to simulate or recreate histological images and structures without the need for traditional physical slides and...

Virtual reality (VR) is a computer-generated simulation of a three-dimensional environment or experience that can be interacted with and explored by an individual using electronic devices, such as a...

The use of miniature scanners to project raster-scanned video images directly onto the surface of the human retina, eliminating the need for a projection surface.

1. An instrument used to determine the visual range in an environment. 2. A type of photometer that artificially reduces an object's visibility to threshold limits and records the quantity of...

An instrument that uses an erbium:glass laser to determine cloud height from the ground.

The processes in which luminous energy incident on the eye is perceived and evaluated.

The numerical definition of the ability of an observer to perceive fine detail. The average value may be taken as one minute, or 6.7 cycles/mm, at 250 mm (normal viewing distance).

A pair of stars (double star) that can be seen separately with a telescope, generally by setting a filar micrometer for the separation and position angle. Observation of visual binaries improves with...

A photometer that permits visual comparison of the luminance of two surfaces.

The value of the expanse of b-particles in an absorber, evaluated by visual examination of breaks in the absorption curve.

A series of high contrast block letters or similar objects arranged to permit the evaluation of eyesight in humans.

A nondestructive testing method for very large scale integration circuits, using a scanning electron microscope to monitor changes in the electronic state of the chip as it is fed test voltages while...

An electric cell having two electrodes of unlike metals immersed in a solution that chemically affects one or both of them, thus producing an electromotive force.

Volumetric imaging refers to the capture, visualization, and analysis of three-dimensional (3D) information from a volume of space. Unlike traditional two-dimensional (2D) imaging, which provides...

A vortex phase plate is an optical device designed to impart a phase singularity, commonly referred to as a vortex or phase vortex, onto a light beam. This singularity results in a phase profile...