Definitions

A power loss caused by transverse or lateral deviation from optimum alignment of source to optical waveguide, waveguide to waveguide, or waveguide to detector.

A prism or prism assembly that serves to displace the instrument's optical axis.

Spatially offset Raman spectroscopy (SORS) is a technique that extends traditional Raman spectroscopy by incorporating measurements at different spatial offsets. This method allows for the selective...

A technique used to measure the mode-field diameter of an optical fiber by scanning one fiber past another at a distance of five microns or less.

The analysis of fluorescence emitted by discrete atoms, in flames, that have absorbed radiation from an external source. It is used to study the physical and chemical processes that arise from...

A femtosecond laser is a type of laser that emits ultrashort pulses of light with durations on the order of femtoseconds, where one femtosecond is equal to 10-15 seconds. These lasers are capable of...

A device used to scan, with a small, intensely bright spot, portions of a picture surface and to transform the original picture into a series of electrical signals. In optical character recognition,...

Free-space optics (FSO), also known as optical wireless communication or optical wireless networking, refers to the transmission of data using modulated beams of light through free space (air or a...

The frequency space between consecutive transmission peaks in the transmission spectrum of a Fabry-Perot interferometer or etalon. The free-spectral range is inversely proportional to the distance...

A technique used in holography that involves the mixing of lasers of different wavelengths to produce a beam of shorter wavelength.

A pump-probe technique whereby a single wavelength source may be used in order to excite a given sample to determine electronic transitions.

A 2D profile sensor is a type of sensor used in various industrial and technological applications to measure and capture detailed information about the shape, contour, or profile of an object in two...

A 3D profile sensor, also known as a 3D profiling sensor or 3D depth sensor, is a technology that is used to capture and measure the three-dimensional shape or profile of an object or a scene. These...

3D Laser Triangulation - A technology that allows sensors to probe the surroundings. Laser triangulation systems have an ideal operating point, or the standoff distance, where its reflected spot is...

3D printing, also known as additive manufacturing (AM), is a manufacturing process that builds three-dimensional objects layer by layer from a digital model. This technology allows the creation of...

A two-lens arrangement intended to image light into a microscope slide sample. The primary aberrations present are red and blue rings observed around the image focus.

A dispersion relation defined in order to value the reciprocal amount of dispersion. It is defined as the refractivity over the difference in index values of the shortest and longest visible...

Image of a uniform source through the sample of a microscope image system. Light from the sample plane is reimaged by the objective into the image plane.

A form of roof prism used to invert an image. The prism has faces cut normal to the optical axis; therefore, the prism may be placed within the optical path of a system and invert the image without...

Device which measures the index of refraction of glass as well as the dispersion over visible range.

A reflecting prism that inverts the image. The image is reflected four times internally and emitted laterally. The prism is cut normal to the optical axis while the image is internally reflected from...

A departure from ideal paraxial imaging behavior. The distortion of an optical field wavefront as it is propagated through the elements of an optical system. The field distortion is due to the...

Designed for the function of optical wavefront analysis. Shack-Hartmann camera aberration sensors use a lens array to image the wavefront to the CCD image plane. Live feedback may be applied through...

Ablation applied to polymers and chemical solids. Process of material removal that minimizes edge damage but will not heat the surrounding portion of the sample.

A high-brightness, short-duration source in which low-pressure gas initiates the discharge to vaporize material from the tube wall, leading to a high-pressure discharge of ionized wall material.

The alteration and reduction of color with the addition of white light. The perceived color shift that occurs as the monochromatic-white combination meets the eye and is interpreted by the brain. The...

Optical surface damage due to abrasive rubbing. Abrasion damage affects are less than the thickness of the optical coating layers. Surface investigation may be achieved by aluminization of the coated...

Powder used to produce a smooth optical surface through abrasive polishing. Compounds may produce a surface finish specified for each.

An instrument that uses optical filtration in order to measure the transmittance for a discrete range or specific number of wavelengths.

Method of preserving the measured color value and color information as it is translated from differing devices. For example the output of a television display may be measured to have an identical...

The minimum value of luminance for vision. The value may vary with age as well as dark adaption period. (Measured range approximately log luminance -3 through 2.) About 10 -2 ml at the fovea, 10 -5...

The value of the distance of distinct vision, minimum focusing distance or near point, divided by the focal length of the lens. Magnification is produced when the optic is placed at its focal...

Least value of color value combinations which gives white light; minimum purity as determined to be white.

The ratio of the speed of light in a vacuum divided by the speed of light in the medium.

The measurement of heat energy as determined from absolute zero as the zero point on the scale. Increments are identical to the Celsius as well as Kelvin scales.

A perfect diffuser that exists only as a concept, or a white with known spectral characteristics used as a reference in measuring absolute reflectance.

The natural log of the ratio of absorbed intensity over the total intensity which gives a constant value assuming a stable volume as well as energy. In optical physics the absorbance may be defined...

A doped or absorbing transparent medium cut or molded into a wedge in order to measure the real and imaginary components of the refractive index. An internally reflected Gaussian beam is interfered...

The ratio of energy or intensity absorbed by the medium (numerator) to the total incident energy.

The transfer of energy from an incident electromagnetic energy field with wavelength or frequency to an atomic or molecular medium.

A group of frequencies or wavelengths on the electromagnetic spectrum which exhibits resonance or energy contributions near and in relation to a peak resonance wavelength.

The transition cross section constant coefficient which defines the transition probability of absorption from ground to a higher level within a given atomic or molecular species. The transition...

A hologram formed when the light of the illuminating beam is absorbed in correspondence with the recording exposure. In application, absorption holograms are intended for use in satellite...