Definitions

Optical coatings are thin layers of materials applied to optical components, such as lenses, mirrors, filters, and prisms, to modify their reflective and transmissive properties. These coatings are...

Optical surface damage due to abrasive rubbing. Abrasion damage affects are less than the thickness of the optical coating layers. Surface investigation may be achieved by aluminization of the coated...

An optical lens manufactured to control the transmission of light over a specified wavelength range. Low absorption lenses are produced which are anti-reflection coated for UV, VIS and IR wavelengths...

The intermolecular attraction between two surfaces, as between a substrate and a coating; it is an important factor in the durability of optical thin films.

A coating that is capable of stopping the condensation of moisture on an optical surface.

An antireflection coating (AR coating) is a thin film or coating applied to optical surfaces, such as lenses or windows, to minimize unwanted reflections and increase the transmission of light...

A beamsplitter is an optical device used to divide a beam of light into two or more separate beams, typically by reflecting a portion of the incident light while transmitting the remainder....

Broadband dielectric mirrors, also known as broadband mirrors, are optical coatings designed to efficiently reflect or transmit light over a broad range of wavelengths. These mirrors are constructed...

An optical interference coating, vacuum-deposited on a circular substrate, whose transmission characteristics may be varied by physical rotation.

The low-refractive-index material that surrounds the core of an optical fiber to contain core light while protecting against surface contaminant scattering. In all-glass fibers, the cladding is...

A mechanism or device, especially a coating with a refractive index equal to or slightly greater than that of an optical fiber's cladding, that removes modes propagating through the cladding by...

Optical elements that have been coated with one or more layers of dielectric, or metallic material. These coatings serve to reduce or increase reflection from the surface, and to protect the surfaces...

A corner cube, also known as a corner reflector or retroreflector prism, is a type of optical device used to reflect light or electromagnetic waves back towards their source with minimal deviation in...

A custom optic refers to an optical component that is designed, manufactured, and tailored to meet specific requirements or applications. These optics can include lenses, mirrors, prisms, filters, or...

A very hard, highly transparent coating based on forms of carbon, used to protect optical components from abrasion and chemical damage.

A dichroic coating, also known as a dichroic filter or dichroic mirror, is an optical coating designed to selectively transmit or reflect certain wavelengths of light while simultaneously absorbing...

A dichroic mirror, also known as a dichroic beamsplitter or interference filter beamsplitter, is an optical device that selectively reflects or transmits light based on its wavelength. Dichroic...

A system for fabricating optical fiber, consisting of a furnace that heats the materials, a polymer coating stage, a capstan-pulling apparatus that free-draws the preform into a fiber and a drum on...

Etaloning is an optical phenomenon that occurs in imaging systems, particularly in devices such as spectrometers, interferometers, and cameras. It is characterized by the appearance of interference...

Coating carried out in a sealed chamber evacuated by a mechanical pump in series with an oil diffusion pump to a pressure less than 10-4 mm of mercury, measured by a vacuum gauge. At such a low...

Fresnel reflection refers to the reflection of light at the interface between two different media with different refractive indices. This phenomenon was named after the French engineer and physicist...

An optical reflector with the reflective coating applied to the front surface of the substrate. This eliminates the ghost image formed with second-surface mirrors.

Graphene is a two-dimensional allotrope of carbon consisting of a single layer of carbon atoms arranged in a hexagonal lattice pattern. It is the basic building block of other carbon-based materials...

An infrared lens is an optical component specifically designed and optimized for transmitting, focusing, or manipulating infrared (IR) radiation within the infrared spectrum. These lenses are used in...

An optical component coated to reflect infrared radiation. Gold, silver and aluminum are typical coating materials.

Ion-beam sputtering (IBS) is a physical vapor deposition (PVD) technique used for depositing thin films onto substrates. It involves bombarding a target material with a beam of energetic ions,...

Also called coating jig allowance. That margin on an optical component that is outside the clear aperture for use in holding the component in the optical thin-film coater tooling during the...

A laser cavity, also known as an optical cavity or resonator, is a fundamental component of a laser system. It is a confined region or space where light undergoes multiple reflections, leading to the...

The laser damage threshold refers to the maximum level of laser intensity that a material can withstand without experiencing damage. It is a critical parameter in laser applications and is...

Laser optics refers to a broad category of optical components and systems designed for manipulating and controlling laser light. Laser optics play a crucial role in shaping the characteristics of...

A lens blank is a piece of optical material in a raw, unfinished state, typically in the form of a disk or block, from which lenses are eventually fabricated. Lens blanks are made from various...

A homogeneous optical medium or coating that transmits only in particular regions of the spectrum. It is used to change or modify the total or relative energy distribution of a beam of light.

A self-healing, index-matching, nonporous coating for optical components that can eliminate production difficulties and deficiencies associated with solid-film contamination and postdeposition...

A long-pass filter is an optical filter that allows longer wavelengths of light to pass through while blocking or attenuating shorter wavelengths. These filters are designed to transmit light with a...

A machine vision lens is a specialized optical lens designed for use in machine vision systems, which are used for automated inspection, measurement, and quality control in industrial applications....

The fundamental tool of microdensitometry, the microdensitometer is an instrument used for the precise measurement of microscopic optical densities (i.e. optical absorption) by detection of faint...

One or more thin-film layers of optical material deposited on a mirror blank/substrate in order to enhance the way that substrate reflects light. For example of optical materials/optical coatings...

The observation and measurement of the flatness of a mirror surface by contacting an optical flat with the mirror. The process generally is done before coating so as not to damage the delicate coated...

Modified chemical vapor deposition (MCVD) is a technique used in the fabrication of optical fibers. It is a specialized form of chemical vapor deposition (CVD) that is employed to produce...

A type of tubing used to protect optical fiber cables, consisting of a wire spiral of aluminum, galvanized steel or stainless steel, encased in a polyvinyl chloride or silicon rubber coating. These...

Transparent glassy and or crystalline structured materials engineered from inorganic, non-metallic materials via various methods that include heat or specific chemical reactions. Optical ceramics...

An optical filter is a device that selectively transmits or blocks specific wavelengths, or colors, of light. Optical filters are used to control the spectral content of light in various...

Optical manufacturing tools and machinery encompass a wide range of equipment, instruments, and systems used in the fabrication, shaping, finishing, and testing of optical components and systems....