Definitions

Also known as the Wiener spectrum or the noise power spectrum, the optical power spectrum is a fundamental quantity in film-screen image quality evaluation. It is a means of describing image content...

A curve expressing an optical fiber's total transmitted power as a function of its launch angle at the input.

Angular deviation from the optimum alignment of source to optical waveguide, waveguide to waveguide, or waveguide to detector, resulting in a loss of optical power.

The rate of diminution of average optical power and the sum of the scattering and absorption coefficients.

A low-power telescope placed at the eyepiece of an optical system to increase overall magnification. Most often used to evaluate image quality.

Beam profiling is a technique used to characterize and analyze the spatial intensity distribution of a laser beam. It involves measuring and visualizing how the optical power or intensity is...

The loss of optical power in an optical fiber because radiation escapes through its bends. The radiation loss caused by fiber bending is proportional to the bend radius.

Blaze height typically refers to a parameter in the context of diffraction gratings, which are optical devices consisting of a series of closely spaced parallel grooves or slits. The blaze height is...

Brillouin scattering is a phenomenon in physics where an incident electromagnetic wave (usually light) interacts with acoustic phonons (quantized lattice vibrations) in a material, resulting in the...

A CCD image sensor, or charge-coupled device image sensor, is a type of electronic device used to convert optical images into electronic signals. It is a key component in digital cameras, camcorders,...

The use of phase conjugation or other methods to increase the power density of a laser beam under adverse atmospheric conditions.

Reciprocal of the dispersive power of an optical material. See Abbe constant.

A corner cube, also known as a corner reflector or retroreflector prism, is a type of optical device used to reflect light or electromagnetic waves back towards their source with minimal deviation in...

1. In color development, the chemical that combines with certain by-products of the development procedure to form a dye. 2. Device for distributing optical power among two or more ports. 3. Device...

A flanged or plain ring with a restricted aperture, located in an optical system at any of several points, that cuts off marginal light rays not essential to image formation. Diaphragms are used as...

Diffraction efficiency is a measure of how effectively a diffractive optical element (DOE) or diffraction grating directs light into specific diffraction orders or achieves a desired optical effect....

A diode laser is a type of laser that uses a semiconductor diode as the active medium to generate coherent light. Semiconductor diodes are electronic devices that conduct electricity primarily in one...

A unit of optical measurement that expresses the refractive power of a lens or prism. In a lens or lens system, it is the reciprocal of the focal length in meters. For example, if a lens has a focal...

Double-clad fiber (DCF) is a specialized optical fiber that features two concentric cladding layers surrounding a core. The design of double-clad fibers allows them to be used in various...

An electro-optic deflector is a device that can change the direction of light beams using an electric field. It operates based on the electro-optic effect, which involves the modulation of the...

A laser that distributes its output power among two, three or four optical fibers simultaneously.

The condition in a multimode optical waveguide in which the relative power distribution among the propagating modes is independent of length.

The effect discovered by Faraday in 1845 whereby nonoptically active materials or substances become capable of rotating the polarization plane of polarized radiation (light) passed through them when...

A femtosecond laser is a type of laser that emits ultrashort pulses of light with durations on the order of femtoseconds, where one femtosecond is equal to 10-15 seconds. These lasers are capable of...

The lowest frequency at which the magnitude of the fiber transfer function decreases to a specified fraction of the zero frequency value. Often, the specified value is one-half the optical power at...

A phenomenon in which high optical power, encountering an imperfection in an optical fiber, destroys the fiber's core and causes damage to back-propagate down the fiber. It is caused by classic...

A fiber laser is a type of laser in which the active gain medium is an optical fiber doped with rare-earth ions such as erbium, ytterbium, or neodymium. Fiber lasers generate coherent light through...

A fiber optic spectrometer is a device used for measuring the spectral content of light. It utilizes optical fibers to transmit light from a source to a spectrometer unit, where the light is...

A fiber optic transceiver, often simply referred to as an "optical transceiver," is a device used in fiber optic communications to transmit and receive data over optical fibers. It integrates both a...

A fiber-coupled LED (light-emitting diode) refers to an LED device that is optically coupled to an optical fiber for the purpose of efficient light transmission. In this configuration, the LED serves...

The focal length of a lens is the distance between the lens's optical center (or principal point) and the image sensor or film when the lens is focused at infinity. In simple terms, it is the...

In a symmetrical optical system this is a measure of the influence of the system upon the focus of a pencil of rays passing through it.

A frequency comb is a precise and regular series of equally spaced spectral lines, or frequencies, that are generated with great accuracy. The term "frequency comb" is often associated with the Nobel...

A Fresnel lens is a type of optical lens that consists of a series of concentric grooves or steps carved into a flat, thin piece of transparent material, typically plastic or glass. This design...

A GaAlAs laser is a type of semiconductor laser diode that emits light in the near-infrared region of the electromagnetic spectrum. It is composed of layers of gallium, aluminum, and arsenic, hence...

Gallium nitride (GaN) is a compound made up of gallium (Ga) and nitrogen (N). It is a wide-bandgap semiconductor material that exhibits unique electrical and optical properties. Gallium nitride is...

GaN (gallium nitride) distributed feedback (DFB) lasers refer to a specific type of semiconductor laser based on Gallium Nitride materials and designed with a distributed feedback structure. These...

The optical power loss caused by a space between axially aligned fibers.