Definitions

Fiber in which both core and cladding are made of plastic.

Plastic optical fiber (POF) is a type of optical fiber made from transparent plastic, typically polymethylmethacrylate (PMMA) or polycarbonate. Unlike traditional glass optical fibers, which are made...

A technique developed by British Telecom in which the viscous drag of air is used to install optical fibers in narrow plastic tubes.

The low-refractive-index material that surrounds the core of an optical fiber to contain core light while protecting against surface contaminant scattering. In all-glass fibers, the cladding is...

A diffraction grating is an optical component consisting of a surface with a periodic structure of equally spaced, parallel grooves or rulings. These rulings act as an array of closely spaced slits...

An endoscope is a medical device used for visualizing and examining the interior of hollow organs, body cavities, or confined spaces within the body. It consists of a flexible or rigid tube equipped...

A rigid or flexible, concentrated assembly of glass or plastic fibers used to transmit optical images or light. See aligned bundle; incoherent bundle.

A fiber optic cable assembly refers to a complete unit consisting of optical fibers, connectors, protective jackets, and other components that are assembled together to facilitate the transmission of...

The use of thin flexible glass or plastic fibers as wave guides — or "light pipes" — to channel light from one location to another. Fiber optics is based off of the principle of total...

A fiber-coupled LED (light-emitting diode) refers to an LED device that is optically coupled to an optical fiber for the purpose of efficient light transmission. In this configuration, the LED serves...

Laser marking is a process in which a laser beam is used to mark or engrave a surface by altering its properties or appearance. This technique is widely used for labeling, identification, and...

Process that occurs when a polymerized soft plastic rod with higher refractive index is placed in a bath of a lower refractive-index monomer to obtain plastic fibers with a nearly parabolic index...

Optical cements and adhesives are specialized materials used in the assembly and bonding of optical components in optical systems. These materials are designed to provide secure and durable bonds...

Optical fiber is a thin, flexible, transparent strand or filament made of glass or plastic used for transmitting light signals over long distances with minimal loss of signal quality. It serves as a...

Laser-powered telephone device for analog communications that employs a vibrating plastic membrane as a transmitter to modulate laser light piped via optical fibers from a central exchange, omitting...

Optics is the branch of physics that studies the behavior and properties of light, including its interactions with matter and its manifestation as both particle and wave phenomena. It encompasses the...

Low-insertion-loss fiber coupler fabricated from a sheet of light-sensitive material laminated onto a fused quartz substrate and exposed through a suitable mask. After development of the plastic...

The direct cladding used for fused silica cores to create large numerical aperture fibers and used as overcoats to glass-clad fibers to reduce microbend loss and increase mechanical protection.

An optical waveguide having a silica core and a plastic cladding.

A process that employs heat to remove polyimide plastic coatings from silica optical fibers and capillary tubing.

A material used in the jacket of fiber optic cables.

A highly flame-retardant material used to jacket fiber optic cables, especially on shipboard applications.