Search
Menu
Alluxa - Optical Coatings LB 8/23
Photonics Marketplace
137 products

Optomechanics & Positioning

Clear All Filters xND xOptomechanics & Positioning x
Nano-Bio
Nano-Bio
Mad City Labs Inc.
  • Type: Nanopositioning Stage
  • Max. Load: 0.5kg
  • Control: Closed Loop
  • Stability: High
  • Type: Low profile, two axis
Premier Product
MicroStage-BX
MicroStage-BX
Mad City Labs Inc.
  • Type: Nanopositioning Stage
  • X-Axis Travel Length: 25mm
  • Y-Axis Travel Length: 25mm
  • Stage Type: Manual
  • Body Material: Aluminum
  • Graduation: 10 µm
  • Vernier graduations: 1 µm
Premier Product
Pivot Bearings and Flexible Metal Products
Pivot Bearings and Flexible Metal Products
C-Flex Bearing Co. Inc.
  • Type: Motion Controllers
Quick-Connect Translation Stages, 50 mm Travel
Quick-Connect Translation Stages, 50 mm Travel
Thorlabs Inc.
  • Type: Linear Stage
  • Max. Load: 81.9kg
  • Mass: 0.7kg
  • Height: 23mm
  • X-Axis Travel Length: 50mm
  • Stage Type: Manual
  • Angular Deviation: <150 µrad
  • Bearing Type: Crossed Roller Bearings
  • Orthogonality: <25 µrad (XY Stacked)
5 mm Linear Stage with Piezoelectric Inertia Drive
5 mm Linear Stage with Piezoelectric Inertia Drive
Thorlabs Inc.
  • Type: Linear Stage
  • Max. Load: 1kg
  • Mass: 32g
  • Height: 6.5mm
  • X-Axis Travel Length: 5mm
  • Max. Linear Speed: 10mm/s
  • Stage Type: Motorized
  • Connector Type: 15-Pin Female D-Sub
  • Max. Step Frequency: 20 kHz
  • Operation: Open-Loop
Polaris® 5-Axis Kinematic Mounts
Polaris® 5-Axis Kinematic Mounts
Thorlabs Inc.
  • Type: Optical Mounts
  • Cleanroom Compatible: Yes
  • Optic Diameter: Ø1/2"
  • Tip/Tilt Range: ±4°
Dual-Axis Galvanometer Scan Heads
Dual-Axis Galvanometer Scan Heads
Thorlabs Inc.
  • Type: 2 Axis
  • Max. Beam Diameter: 45mm
  • Max. Scan Angle X (degrees): 22.5
  • Max. Scan Angle Y (degrees): 22.5
  • Small Step Response (µs): 1200
  • Repeatablility (µrad): 10
  • Linearity (%): 99.9
  • Control Electronics: Analog Servo Amplifiers
  • Gain Drift: 50 ppm/°C
  • Mirror Substrate: Fused Silica/SiC/Si
M150XY(/M)
M150XY(/M)
Thorlabs Inc.
  • Type: Linear Stage
  • Max. Load: 10kg
  • Mass: 8.9kg
  • Height: 70.1mm
  • X-Axis Travel Length: 150mm
  • Y-Axis Travel Length: 150mm
  • Max. Linear Speed: 170mm/s
  • Absolute On-Axis Accuracy: ±10 μm
  • Continuous Motor Force: 10.0 N
  • Maximum Acceleration: 1000 mm/s^2
Multi-Axis Gantries, Cartesian Robots
Multi-Axis Gantries, Cartesian Robots
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics
  • Type: Linear Stage
Miniature Linear Stages
Miniature Linear Stages
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics
  • Type: Linear Stage
Automated Photonics Alignment Systems
Automated Photonics Alignment Systems
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics
  • Type: Other
H-840 High Performance High Value Hexapod
H-840 High Performance High Value Hexapod
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics
  • Type: Hexapod
  • Max. Load: 40kg
  • Mass: 5kg
  • Height: 25cm
  • X-Axis Range: 10cm
  • Y-Axis Range: 10cm
  • Z-Axis Range: 5cm
HexGen HEX500-350HL
HexGen HEX500-350HL
Aerotech Inc.
  • Type: Hexapod
  • Max. Load: 200kg
  • Mass: 49kg
  • Height: 350mm
  • X-Axis Range: 100mm
  • Y-Axis Range: 110mm
  • Z-Axis Range: 54mm
  • Linear Accuracy: ±0.5 μm
  • Linear Resolution: 20 nm
  • Rotary Accuracy: ±2.5 μrad
HexGen HEX300-230HL
HexGen HEX300-230HL
Aerotech Inc.
  • Type: Hexapod
  • Max. Load: 45kg
  • Mass: 12kg
  • Height: 230mm
  • X-Axis Range: 55mm
  • Y-Axis Range: 60mm
  • Z-Axis Range: 25mm
  • Linear Accuracy: ±0.5 μm
  • Linear Resolution: 20 nm
  • Rotary Accuracy: ±2.5 μrad
HexGen HEX150-140HL
HexGen HEX150-140HL
Aerotech Inc.
  • Type: Hexapod
  • Max. Load: 7.5kg
  • Mass: 2.3kg
  • Height: 141mm
  • X-Axis Range: 40mm
  • Y-Axis Range: 40mm
  • Z-Axis Range: 16mm
  • Linear Accuracy: ±0.75 µm
  • Linear Resolution: 20 nm
  • Rotary Accuracy: ±7.3 µrad
AGV-HP(O)
AGV-HP(O)
Aerotech Inc.
  • Type: 2 Axis
  • Max. Beam Diameter: 30mm
  • Max. Scan Angle X (degrees): 40
  • Max. Scan Angle Y (degrees): 40
  • Small Step Response (µs): 270
  • Repeatablility (µrad): 0.4
  • Linearity (%): 0.005
  • Long-Term Drift: 10 µrad / 12 hr
  • Max. Positioning Speed: 75 m/s
  • Processing Speed: 5 m/s
AGV3D
AGV3D
Aerotech Inc.
  • Type: 3 Axis
  • Max. Beam Diameter: 12mm
  • Overall Height (no mirror): 148.6mm
  • Weight: 11.2kg
  • Long-Term Drift: 10 µrad / 12 hr
  • Max. Positioning Speed: 400 m/s
  • Min. Incremental Motion: 0.05 µm
precSYS 5-axis micromachining system
precSYS 5-axis micromachining system
SCANLAB GmbH
  • Type: 3 Axis
  • Weight: 30kg
intelliSCANse
intelliSCANse
SCANLAB GmbH
  • Type: 2 Axis
excelliSCAN
excelliSCAN
SCANLAB GmbH
  • Type: 2 Axis
  • Max. Scan Angle X (degrees): 0.35
  • Repeatablility (µrad): 0.4
  • Weight: 7kg
Galvanometer: dynAXIS3 M
Galvanometer: dynAXIS3 M
SCANLAB GmbH
  • Type: 1 Axis
  • Small Step Response (µs): 0.4
  • Repeatablility (µrad): 1
  • Overall Height (no mirror): 74mm
  • Weight: 300g
  • Nonlinearity: <0.1%
UniSlide® Assemblies
UniSlide® Assemblies
Velmex Inc.
  • Type: Linear Stage
  • Max. Load: 182kg
  • Height: 7.95cm
  • X-Axis Travel Length: 106.68cm
  • Y-Axis Travel Length: 106.68cm
  • Stage Type: Manual,Motorized
  • Driver Included?: No
H112 ProScan Stage
H112 ProScan Stage
Prior Scientific Inc.
  • Type: Linear Stage
  • Max. Load: 25kg
  • X-Axis Travel Length: 302mm
  • Y-Axis Travel Length: 302mm
  • Stage Type: Motorized
  • Linear Slides: 4 mm precision bearings
  • Minimum Step Size: 0.04 µm
  • Stepper Motor: High precision stepper
Motorized ZDeck Quick Adjust Platform System
Motorized ZDeck Quick Adjust Platform System
Prior Scientific Inc.
  • Type: Optical Mounts
  • ProScan Computer Interface: RS 232/USB
  • Spacers Provided: Four pillar spacers, four one in. spacers
  • Vibration Table Compatibility: 1/4-20 or 6 mm
PZ-2000FT Series Automated Stage
PZ-2000FT Series Automated Stage
Applied Scientific Instrumentation Inc.
  • Type: Linear Stage
  • Max. Load: 2kg
  • X-Axis Travel Length: 120mm
  • Y-Axis Travel Length: 110mm
  • Max. Linear Speed: 7mm/s
  • Stage Type: Motorized
  • Driver Included?: Yes
  • Maximum Continuous Output: 13 mA
  • PZ-2150 Travel Range: 150 μm
  • PZ-2300 Travel Range: 300 μm
QNP2 Series
QNP2 Series
Aerotech Inc.
  • Type: Nanopositioning Stage
  • Max. Load: 3kg
  • Mass: 1.2kg
  • Height: 20mm
  • X-Axis Travel Length: 200µm
  • Y-Axis Travel Length: 200µm
  • Z-Axis Travel Length: 0µm
  • Bi-dir. Repeatability: 1 nm
  • Linear Resolution: 0.1 nm
  • Linearity: 0.01 %
H-811 6-Axis Motion Miniature Hexapod
H-811 6-Axis Motion Miniature Hexapod
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics
  • Type: Hexapod
  • Max. Load: 5kg
  • Mass: 2.2kg
  • Height: 11cm
  • X-Axis Range: 34cm
  • Y-Axis Range: 34cm
  • Z-Axis Range: 21cm
H-845 Heavy-Duty Hexapod
H-845 Heavy-Duty Hexapod
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics
  • Type: Hexapod
  • Max. Load: 1000kg
  • Mass: 120kg
  • Height: 66cm
  • X-Axis Range: 3.4cm
  • Y-Axis Range: 3.2cm
  • Z-Axis Range: 1.3cm
LS-50
LS-50
Applied Scientific Instrumentation Inc.
  • Type: Linear Stage
  • Max. Load: 4.5kg
  • Mass: 1.4kg
  • Height: 35.5mm
  • X-Axis Travel Length: 50mm
  • Max. Linear Speed: 1.6mm/s
  • Stage Type: Motorized
  • Accuracy: 0.25 μm per mm
  • Length: 152.5 mm
  • Resolution: < 0.1 μm
NanoCube P-616
NanoCube P-616
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics
  • Type: Nanopositioning Stage
  • Max. Load: 100g
  • Mass: 0.08kg
  • Height: 4cm
  • X-Axis Travel Length: 0.1mm
  • Y-Axis Travel Length: 0.1mm
  • Z-Axis Travel Length: 0.1mm
  • Linearity Error (entire travel range): 0.1%
  • Min. Incremental Motion: 0.2 nm
  • Sensor Type: acitive sensor
Motorized Filter Wheel
Motorized Filter Wheel
Andover Corporation
  • Type: Filter Wheels
  • Compact Size: 5" × 4.5" × 1.9"
  • Diameter: 12.5 - 25 mm
  • Serial: RS 232
intelliWELD
intelliWELD
SCANLAB GmbH
  • Type: 3 Axis
HT1111LC ProScan Stage
HT1111LC ProScan Stage
Prior Scientific Inc.
  • Type: Linear Stage
  • Max. Load: 100kg
  • X-Axis Travel Length: 108mm
  • Y-Axis Travel Length: 108mm
  • Stage Type: Motorized
  • Drive Screws: Zero backlash, recirc. ball screws; 2 mm pitch
  • Minimum Step Size: 0.4 µm
  • Stepper Motor: 4 phase, 1 amp/phase, microstepping
H117 ProScan Stage
H117 ProScan Stage
Prior Scientific Inc.
  • Type: Linear Stage
  • Max. Load: 10kg
  • X-Axis Travel Length: 114mm
  • Y-Axis Travel Length: 75mm
  • Max. Linear Speed: 100mm/s
  • Stage Type: Motorized
  • Max. Resolution: up to 10 nm
  • Repeatability: ±0.7 µm
H101F Flat Top Stage
H101F Flat Top Stage
Prior Scientific Inc.
  • Type: Linear Stage
  • Max. Load: 10kg
  • Height: 42mm
  • X-Axis Travel Length: 114mm
  • Y-Axis Travel Length: 75mm
  • Max. Linear Speed: 40mm/s
  • Stage Type: Motorized
  • Minimum Step Size (resolution): 0.02 µm
H101A ProScan™ Stage
H101A ProScan™ Stage
Prior Scientific Inc.
  • Type: Linear Stage
  • Max. Load: 10kg
  • Height: 68cm
  • X-Axis Travel Length: 114mm
  • Y-Axis Travel Length: 75mm
  • Stage Type: Motorized
  • Driver Included?: Yes
  • Minimum Step Size: 0.01 µm
  • XY Repeatability: 0.7 µm
ES107 OptiScan Stage
ES107 OptiScan Stage
Prior Scientific Inc.
  • Type: Linear Stage
  • X-Axis Travel Length: 114mm
  • Y-Axis Travel Length: 75mm
  • Stage Type: Motorized
  • Driver Included?: Yes
  • Drive Mechanism: Anti-backlash precision lead screw
  • Linear Slides: 3 mm ball bearings
  • Repeatability: ±5 µm
H107 ProScan Stage
H107 ProScan Stage
Prior Scientific Inc.
  • Type: Linear Stage
  • Max. Load: 10kg
  • Height: 63mm
  • X-Axis Travel Length: 112mm
  • Y-Axis Travel Length: 70mm
  • Stage Type: Motorized
  • Linear Slides: 3 mm precision bearings
  • Minimum Step Size: 0.04 µm
  • Stepper Motor: 4 phase, 1 amp per phase micro stepping
NanoScanZ Nanopositioning Piezo Z Stages
NanoScanZ Nanopositioning Piezo Z Stages
Prior Scientific Inc.
  • Type: Nanopositioning Stage
  • Max. Load: 500g
  • Height: 21mm
  • Stage Type: Motorized
  • Accuracy and Linearity: 0.5% of travel
  • Operating Temperature: 5-50 °C
  • Repeatability: 5 nm
HLD117 Linear Motor Stage
HLD117 Linear Motor Stage
Prior Scientific Inc.
  • Type: Linear Stage
  • Max. Load: 6kg
  • Mass: 7kg
  • Height: 45mm
  • X-Axis Travel Length: 120mm
  • Y-Axis Travel Length: 80mm
  • Max. Linear Speed: 300mm/s
  • Metric Accuracy (per mm of travel): 0.045 µm
  • Min. Step Size (resolution): 0.05 µm
  • XY Repeatability: 0.15 µm
OE-1250 GEN II MS-Stage
OE-1250 GEN II MS-Stage
Applied Scientific Instrumentation Inc.
  • Type: Linear Stage
  • X-Axis Travel Length: 125mm
  • Y-Axis Travel Length: 125mm
  • Max. Linear Speed: 14mm/s
  • Stage Type: Motorized
  • Driver Included?: Yes
  • XY Axis Maximum Velocity: 7 mm /sec
  • XY Axis Resolution: 0.022 μm
  • XY Axis RMS Repeatability: < 0.7 μm
LS-200
LS-200
Applied Scientific Instrumentation Inc.
  • Type: Linear Stage
  • Max. Load: 4.5kg
  • Mass: 2.4kg
  • Height: 35.5mm
  • X-Axis Travel Length: 200mm
  • Max. Linear Speed: 7mm/s
  • Stage Type: Motorized
  • Accuracy: 0.25 μm per mm
  • Length: 305 mm (12")
  • Resolution: < 0.1 μm
LS-100
LS-100
Applied Scientific Instrumentation Inc.
  • Type: Linear Stage
  • Max. Load: 4.5kg
  • Mass: 1.9kg
  • Height: 35.5mm
  • X-Axis Travel Length: 100mm
  • Max. Linear Speed: 1.6mm/s
  • Stage Type: Motorized
  • Accuracy: 0.25 μm per mm
  • Length: 203.5 mm (8")
  • Resolution: < 0.1 μm
XSlide™ Assemblies
XSlide™ Assemblies
Velmex Inc.
  • Type: Linear Stage
  • Max. Load: 15.9kg
  • Height: 3.5cm
  • X-Axis Travel Length: 76.2cm
  • Y-Axis Travel Length: 76.2cm
  • Stage Type: Manual,Motorized
  • Driver Included?: No
BiSlide® Linear Assemblies
BiSlide® Linear Assemblies
Velmex Inc.
  • Type: Linear Stage
  • Max. Load: 136.1kg
  • Height: 6.2cm
  • X-Axis Travel Length: 203.2cm
  • Y-Axis Travel Length: 203.2cm
  • Stage Type: Manual,Motorized
  • Driver Included?: No
  • Load Capacity (horizontally): 300 lbs
  • Travel Lengths: up to 80"
Electric Cylinder with Built-in Encoder
Electric Cylinder with Built-in Encoder
Moticont
  • Type: Linear Stage
  • X-Axis Travel Length: 2.5cm
  • Max. Linear Speed: 100cm/s
  • Continuous Force: up to 33.9 N
  • Encoder Resolution: 1.25 and 5.0 µm
  • Intermittent Force: up to 107 N
Enclosures for Cameras, Lasers, and LED Lighting
Enclosures for Cameras, Lasers, and LED Lighting
Tectivity
  • Type: Other
ZONDA Hexapod
ZONDA Hexapod
Symetrie
  • Type: Hexapod
  • Max. Load: 400kg
  • Mass: 99kg
  • Height: 640cm
  • X-Axis Range: 200mm
  • Y-Axis Range: 200mm
  • Z-Axis Range: 150mm
  • Repeatability Rx, Ry, Rz: ± 2 µrad
  • Repeatability Tx, Ty, Tz: ± 0.5 µm
  • Resolution Rx, Ry, Rz: 0.5 µrad
GM-1015 Digital Encoder Galvano Scanner
GM-1015 Digital Encoder Galvano Scanner
Canon U.S.A. Inc., Industrial Products Div.
  • Type: 2 Axis
  • Max. Beam Diameter: 15mm
  • Max. Scan Angle X (degrees): 20
  • Max. Scan Angle Y (degrees): 20
  • Small Step Response (µs): 390
  • Repeatablility (µrad): 3
  • Overall Height (no mirror): 88mm
HXP100P-MECA
HXP100P-MECA
MKS/Newport
  • Type: Hexapod
  • Max. Load: 6kg
  • Mass: 5.6kg
  • Height: 20.9cm
  • X-Axis Range: 5.5cm
  • Y-Axis Range: 5cm
  • Z-Axis Range: 2.8cm
  • Min. Incremental X Motion: 0.10 µm
  • Min. Incremental Y Motion: 0.10 µm
  • Min. Incremental Z Motion: 0.05 µm

Optomechanics & Positioning Products

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.