EigenLight Corp. (See NeoPhotonics Corp.)EigenLight Corp.'s series 400 WDM power monitor attenuators provide a spectrally flat response from 1520 to 1620 nm, so measurements can be made on any WDM channel without adjusting for sensitivity variations from channel to channel. This feature also allows measurement and control of optical power in live fiber optic systems over the entire erbium amplifier band. The 400 series features manual control of attenuation over 40 dB, power readout from -50 to +28 dBm, typical battery life of three years and minimum insertion loss of less than 1.3 dB.See full productRelated content from Photonics MediaWEBINARSPhotonics.com 1/12/2023A Proven, Portable, and PIC-Based Methodology for Cultivating a Next-Generation WorkforceWith the passage of the CHIPS and Science Act and growing demand for photonic integrated circuit technology, the semiconductor industry is once again gaining momentum. But even as the U.S. rebuilds...Photonics.com 6/30/2021European Photonics Manufacturing Services Funded by ECThis event is supported by the European initiatives presented and is moderated by EPIC, the European Photonics Industry Consortium. The European Commission is helping companies access the...Photonics.com 1/18/2018Fiberguide RARe Motheye Fiber: Random Anti-Reflective (RARe) Nanostructures on Optical Fibers as Replacement for AR CoatingsAnti-reflective (AR) coatings are now entering their second century and have remained virtually unchanged throughout their life. As power level and wavelength range requirements continue to increase,...Photonics.com 3/27/2024Precision Planning: Simplified Laser Scanning with Predictive SoftwareConventional controllers for laser scan systems do not allow to predict the actual path of the laser beam on the work piece. A tedious process of testing different parameters and delay settings...