|
|
 signifies the attendance of www.Photonics.com
E-mail your listings or changes to events@laurin.com.
September 8-12 (Bellevue, WA ).
2008 Optical Design Using ZEMAX
Optical Design Using ZEMAX is perfect for first time users of ZEMAX who need an introduction to optical design, basic principles and techniques, and design of simple imaging optical systems. This course covers the basics of using ZEMAX, defining optical systems, optimization, ray aberration fans and other diagnostic tools, multiple configurations, apodization, vignetting, and an introduction to tolerancing.
|
|
Click for more information
|
 return to top
|
September 8-10 (Pasadena, CA ).
2008 Introduction to Illumination Design Using LightTools®
This 3-day short course is a practical introduction to LightTools for engineers and scientists who wish to model and analyze the interaction of light with opto-mechanical systems. It assumes some familiarity with optical concepts and terminology. The course includes lectures, demonstrations, and hands-on computer workshop sessions.
|
|
Click for more information
|
|
return to top
|
September 9 (Loughborough, UK).
2008 Laser Safety Forum
A meeting to discuss advances in laser safety management. Includes presentations on topical laser safety issues and an open forum discussion session.
|
|
Click for more information
|
|
return to top
|
September 10 (Loughborough, UK).
2008 Laser Safety Refresher Course
A short course covering the essentials of Laser Safety Management for those who have already attended courses covering laser safety basics. Also intended as an up-date course for those who have attended the Laser Safety Officer course in the past.
|
|
Click for more information
|
|
return to top
|
September 11-12 (Pasadena, CA ).
2008 Advanced Topics in LightTools®: COM Macro Programming, Photorealistic Rendering, and Optimization
This 2-day course provides a practical overview of the LightTools Optimization Module, COM Macro Programming, and Photorealistic Rendering capabilities. The course includes lectures, demonstrations, and hands-on computer workshop sessions. Familiarity with LightTools basic features is assumed.
|
|
Click for more information
|
|
return to top
|
September 15-19 (San Francisco, CA ).
2008 Laser Safety Officer with Hazard Analysis Training
Designed to teach the knowledge required to perform the duties of Laser Safety Officer as described in the ANSI Z136.1 Safe Use of Lasers standard. Information on lasers and optics, applications, bioeffects, beam and non-beam hazards, hazard analysis, control measures and training on laser safety program development and administration. This course meets all LSO training requirements outlined by ANSI, OSHA and ACGIH. Worth 4.5 ABIH CM Points, 32 CECs by AAHP and 4.5 BLS CM Points by the Board of Laser Safety.
|
|
Click for more information
|
|
return to top
|
September 16-19 (Seattle, WA ).
2008 Laser Safety Officer
This Rockwell Laser Industries intermediate level course provides an in-depth, analytical review of the LSO duties and requirements of ANSI Z136.1, OSHA, FDA-CDRH and state laser standards. After a review of the biological basis, the student will complete an in-depth computation workshop that covers MPE, AEL, NHZ and OD factors. Attendees are eligible for 4 ABIH Credits and 32 CECs awarded by AAHP.
|
|
Click for more information
|
|
return to top
|
September 19-20 (Boston, MA ).
2008 Medical Laser Safety Officer
This course is designed to give the operating room personnel a basic foundation in laser biophysics and tissue interaction. Laser safety protocols will be addressed according to the ANSI Z136.3 Safe Use of Lasers in Health Care Facilities standard. Instruction is accomplished through didactics, lectures and discussions.This course is worth 13 Contact Hours, 2 ABIH CM Points, 13 CECs by AAHP and 2 BLS CM Points.
|
|
Click for more information
|
|
return to top
|
September 29-3 (Pasadena, CA ).
2008 Introduction to CODE V® for Image Forming Systems
This course covers the basics on modeling, analyzing, optimizing, and tolerancing optical systems using CODE V, including hands-on workshops. It assumes familiarity with optical concepts and terminology.
|
|
Click for more information
|
|
return to top
|
E-mail your listings or changes to events@laurin.com.
January 15-18 (Phoenix, AZ ).
Laser Safety Officer
This Rockwell Laser Industries level course provides an in-depth, analytical review of the LSO duties and requirements of ANSI Z136.1, OSHA, FDA-CDRH and state laser standards. After a review of the biological basis, the student will complete an in-depth computation workshop that covers MPE, AEL, NHZ and OD factors. Attendees are eligible for 4 ABIH Credits and 32 CECs awarded by AAHP.
|
|
Click for more information
|
|
return to top
|
January 18 (Bangkok, Thailand).
Environmentally Friendly Packaging and Assembly
Indium Corporation and Fusion Advantec will present a full day workshop on “Environmentally Friendly Packaging and Assembly” on January 18, 2008 at the Miracle Grand Hotel in Bangkok, Thailand from 9.00am to 5.00pm. In this session, Dr. Lee will focus on meeting the challenges of electronics miniaturization and wave soldering.
|
|
Click for more information
|
|
return to top
|
January 25-26 (Tampa, FL ).
Medical Laser Safety Officer Training
This course is designed to give the operating room personnel a basic foundation in laser biophysics and tissue interaction. Laser safety protocols will be addressed according to the ANSI ZI36.3 Safe Use of Lasers in Health Care Facilities standard. Instruction is accomplished through didactics, lectures and discussions.
|
|
Click for more information
|
|
return to top
|
January 28-1 (Celebration, FL ).
Optical Design Using ZEMAX
Optical Design Using ZEMAX is perfect for first time users of ZEMAX who need an introduction to optical design, basic principles and techniques, and design of simple imaging optical systems. This course covers the basics of using ZEMAX, defining optical systems, optimization, ray aberration fans and other diagnostic tools, multiple configurations, apodization, vignetting, and an introduction to tolerancing.
|
|
Click for more information
|
|
return to top
|
E-mail your listings or changes to events@laurin.com.
February 4-8 (Orlando, FL ).
Laser Safety Officer Training with Hazard Analysis
Designed to teach the knowledge required to perform the duties of Laser Safety Officer as described in the ANSI Z136.1-2000 Safe Use of Lasers standard. Information on lasers and optics, applications, bioeffects, beam and non-beam hazards, hazard analysis, control measures and training on laser safety program development and administration.
|
|
Click for more information
|
|
return to top
|
February 6-9 (Los Angeles, CA ).
Frontiers in Microrheology Workshop
This workshop, sponsored jointly by the Institute for Complex Adaptive Matter and the California NanoSystems Institute at UCLA, will bring together many of the users and developers of microrheological techniques- both theorists and experimentalists- to review the principal successes of microrheology, share exciting recent advances, and make plans for carrying this field forward into its second decade. The workshop will provide participants the opportunity to help the microrheology community define and achieve its new goals.
|
|
Click for more information
|
|
return to top
|
February 8-10 (Lawrenceville, GA ).
Medical Laser Safety With Hands-On
This course is designed to provide operating room personnel with a foundation in laser biophysics, tissue interaction and safety. Technical aspects as well as established practices will be reviewed on the multi-wavelength lasers. Laser safety protocols will be addressed according to the ANSI Z136.3 Safe Use of Lasers in Health Care Facilities standard. Instruction is accomplished through didactics, discussion and hands-on demonstration. This course is worth 18.5 Contact Hours, and 3 BLS CM Points.
|
|
Click for more information
|
|
return to top
|
February 11-15 (Celebration, FL ).
Advanced Optical Design Using ZEMAX
Advanced Optical Design Using ZEMAX covers the design and analysis of more complex imaging systems, including local and global optimization, merit functions, thermal analysis, diffractive optics, polarization, advanced tolerancing, advanced analysis techniques, gradient index, fiber coupling, boundary conditions, birefringent media, and other topics. This course includes detailed coverage of the Physical Optics Propagation capability, with discussion of diffraction theory as well as many examples of physical optics analysis.
|
|
Click for more information
|
|
return to top
|
February 22-23 (Las Vegas, NV ).
Medical Laser Safety Officer Training
This course is designed to give the operating room personnel a basic foundation in laser biophysics and tissue interaction. Laser safety protocols will be addressed according to the ANSI Z136.3 Safe Use of Lasers in Health Care Facilities standard. Instruction is accomplished through didactics, lectures and discussions.
|
|
Click for more information
|
|
return to top
|
February 25-27 (Pasadena, CA ).
Introduction to Illumination Design Using LightTools
This 3-day short course is a practical introduction to LightTools for engineers and scientists who wish to model and analyze the interaction of light with opto-mechanical systems. It assumes some familiarity with optical concepts and terminology. The course will be taught using LightTools 6.0. The course includes lectures, demonstrations, and hands-on computer workshop sessions.
|
|
Click for more information
|
|
return to top
|
February 26-27 (Cincinnati, OH ).
Principles of Lasers and Laser Safety
This two-day introductory level course is designed to give the participant with limited laser and optics background a solid introduction to lasers and safety concepts based upon ANSI Z136.1, FDA/CDRH, OSHA, and state requirements. Attendees are eligible for 16 CECs awarded by AAHP.
|
|
Click for more information
|
|
return to top
|
February 28-29 (Pasadena, CA ).
Advanced Topics in LightTools: COM Macro Programming, Photorealistic Rendering, and Optimization
This 2-day course provides a practical overview of the LightTools Optimization Module, COM Macro Programming, and Photorealistic Rendering capabilities. The course includes lectures, demonstrations, and hands-on computer workshop sessions.
|
|
Click for more information
|
|
return to top
|
E-mail your listings or changes to events@laurin.com.
March 4-7 (New Orleans, LA ).
Laser Safety Officer
This Rockwell Laser Industries intermediate level course provides an in-depth, analytical review of the LSO duties and requirements of ANSI Z136.1, OSHA, FDA-CDRH and state laser standards. After a review of the biological basis, the student will complete an in-depth computation workshop that covers MPE, AEL, NHZ and OD factors. Attendees are eligible for 4 ABIH Credits and 32 CECs awarded by AAHP.
|
|
Click for more information
|
|
return to top
|
March 6-9 (Minneapolis, MN ).
Laser Safety Officer
This Rockwell Laser Industries intermediate level course provides an in-depth, analytical review of the LSO duties and requirements of ANSI Z136.1, OSHA, FDA-CDRH and state laser standards. After a review of the biological basis, the student will complete an in-depth computation workshop that covers MPE, AEL, and NHZ and OD factors. Attendees are eligible for 4 ABIH Credits and 32 CECs awarded by AAHP.
|
|
Click for more information
|
|
return to top
|
March 7-8 (Dallas, TX ).
The Next Generation in Endoscopic Imaging
Join ASGE President Grace H. Elta, MD, FASGE and Ken Wang, MD, FASGE, for "The Next Generation in Endoscopic Imaging." This conference on the latest technology in imaging and its future in endoscopy will include expert presentations, small workgroup sessions and ample opportunity for networking with key thought leaders, including biophotonic engineers.
|
|
Click for more information
|
|
return to top
|
March 10-14 (Las Vegas, NV ).
Laser Safety Officer Training with Hazard Analysis
Designed to teach the knowledge required to perform the duties of Laser Safety Officer as described in the ANSI Z136.1-2000 Safe Use of Lasers standard. Information on lasers and optics, applications, bioeffects, beam and non-beam hazards, hazard analysis, control measures and training on laser safety program development and administration.
|
|
Click for more information
|
|
return to top
|
March 10-14 (Celebration, FL ).
Optical Design Using ZEMAX
Optical Design Using ZEMAX is perfect for first time users of ZEMAX who need an introduction to optical design, basic principles and techniques, and design of simple imaging optical systems. This course covers the basics of using ZEMAX, defining optical systems, optimization, ray aberration fans and other diagnostic tools, multiple configurations, apodization, vignetting, and an introduction to tolerancing.
|
|
Click for more information
|
|
return to top
|
March 13 (Ilmenau, Germany).
Critical Success Factors for Commercialization: Production Test of MEMS at Wafer Level
At the MEMUNITY Workshop in Ilmenau, engineers and researchers from leading MEMS manufacturers and research institutes will give technical presentations about their current challenges and solutions in wafer-level production test of MEMS. Demonstrations of actual wafer-level MEMS test equipment will be offered as well as a tour of the facilities at IMMS and the Technical University of Ilmenau.
|
|
Click for more information
|
|
return to top
|
March 31-4 (Pasadena, CA ).
Introduction to CODE V
This course covers the basics on modeling, analyzing, optimizing, and tolerancing image forming optical systems using CODE V, including hands-on workshops. It assumes familiarity with optics concepts and terminology. This course will be taught using CODE V version 9.80, which features CODE Vs new user interface. Therefore, both new and part-time users can benefit from this course.
|
|
Click for more information
|
|
return to top
|
E-mail your listings or changes to events@laurin.com.
April 7-11 (Pasadena, CA ).
Advanced Topics in CODE V
This short course will give current users of CODE V an opportunity to learn about and practice using a number of advanced topics and specialized techniques. You will learn how to solve current problems more effectively and discover new applications for CODE V in your work.
|
|
Click for more information
|
|
return to top
|
April 14-18 (Celebration, FL ).
Illumination and Stray Light Analysis Using ZEMAX
Illumination and Stray Light Analysis Using ZEMAX covers non-imaging design and analysis with ZEMAX, including non-sequential ray tracing, scattering, ray splitting, user defined sources/objects/surfaces, CAD import/export, gradient index media, diffractive optics, and other advanced non-sequential analysis and modeling capabilities of ZEMAX.
|
|
Click for more information
|
|
return to top
|
E-mail your listings or changes to events@laurin.com.
May 5-7 (Cleveland, OH ).
Laser Safety Officer
A non-mathematical approach designed to teach the duties of Laser Safety Officer as described in the ANSI Z136.1 Safe Use of Lasers standard. Information on lasers and optics, bioeffects, beam and non-beam hazards, control measures and training requirements are covered. Emphasis is placed on laser safety program development and administration. This course meets all LSO training requirements outlined by ANSI, OSHA and ACGIH. Worth 3.0 ABIH CM Points, 32 CECs by AAHP and 3.0 BLS CM Points by the Board of Laser Safety.
|
|
Click for more information
|
|
return to top
|
May 12-16 (Bellevue, WA ).
Optical Design Using ZEMAX
Optical Design Using ZEMAX is perfect for first time users of ZEMAX who need an introduction to optical design, basic principles and techniques, and design of simple imaging optical systems. This course covers the basics of using ZEMAX, defining optical systems, optimization, ray aberration fans and other diagnostic tools, multiple configurations, apodization, vignetting, and an introduction to tolerancing.
|
|
Click for more information
|
|
return to top
|
May 13-14 (Loughborough, UK).
Laser Safety Course
A practical introduction to laser safety and laser safety management. Intended for participants who have straightforward laser applications or who have additional support. The course is ideal for general safety officers and users of laser products.
|
|
Click for more information
|
|
return to top
|
May 16-17 (Chicago, IL ).
Medical Laser Safety Officer
This course is designed to give the operating room personnel a basic foundation in laser biophysics and tissue interaction. Laser safety protocols will be addressed according to the ANSI Z136.3 Safe Use of Lasers in Health Care Facilities standard. Instruction is accomplished through didactics, lectures and discussions.This course is worth 13 Contact Hours, 2 ABIH CM Points, 13 CECs by AAHP and 2 BLS CM Points.
|
|
Click for more information
|
|
return to top
|
E-mail your listings or changes to events@laurin.com.
June 1 (Boston, MA ).
2008 NSTI Nano Industrial Impact Workshop
The Nano Industrial Impact Workshop is a one-day Intensive Program to educate participants in a range of nanotechnologies and impacted industries. All courses are presented by leading experts in their respective fields. Participation includes; Course Notes, Networking Lunch with the instructors, and Networking Reception following the courses.
|
|
Click for more information
|
|
return to top
|
June 6-8 (Atlanta, GA ).
2008 Medical Laser Safety with Hands-On Demonstration
This course is designed to provide operating room personnel with a foundation in laser biophysics, tissue interaction and safety. Technical aspects as well as established practices will be reviewed on the multi-wavelength lasers. Laser safety protocols will be addressed according to the ANSI Z136.3 Safe Use of Lasers in Health Care Facilities standard. Instruction is accomplished through didactics, discussion and hands-on demonstration.This course is worth 18.5 Contact Hours, and 3 BLS CM Points.
|
|
Click for more information
|
|
return to top
|
June 9-13 (Chicago, IL ).
2008 Laser Safety Officer with Hazard Analysis Training
Designed to teach the knowledge required to perform the duties of Laser Safety Officer as described in the ANSI Z136.1 Safe Use of Lasers standard. Information on lasers and optics, applications, bioeffects, beam and non-beam hazards, hazard analysis, control measures and training on laser safety program development and administration. This course meets all LSO training requirements outlined by ANSI, OSHA and ACGIH. Worth 4.5 ABIH CM Points, 32 CECs by AAHP and 4.5 BLS CM Points by the Board of Laser Safety.
|
|
Click for more information
|
|
return to top
|
June 9-13 (Loughborough, UK).
2008 Laser Safety Management Course
A practical laser safety course covering the real issues within managing laser safety in any environment. A laser safety management program is developed during the course. Participants are assessed during the week and there is a final assessment paper. This course is ideal for anyone required to take on more complex issues of laser safety including those likely to be appointed Laser Safety Officers.
|
|
Click for more information
|
|
return to top
|
June 14-26 (Vancouver, Canada).
2008 3-D Microscopy of Living Cells
This course is likely to involve more hands-on experimental effort than they have ever experienced in a one-week period. It may be exhausting, but it is also a valuable chance to learn first-hand about the problems faced daily by those who really push their instruments to the limit.
|
|
Click for more information
|
|
return to top
|
June 16-20 (Bellevue, WA ).
2008 Advanced Optical Design Using ZEMAX
Advanced Optical Design Using ZEMAX covers the design and analysis of more complex imaging systems, including local and global optimization, merit functions, thermal analysis, diffractive optics, polarization, advanced tolerancing, advanced analysis techniques, gradient index, fiber coupling, boundary conditions, birefringent media, and other topics. This course includes detailed coverage of the Physical Optics Propagation capability, with discussion of diffraction theory as well as many examples of physical optics analysis.
|
|
Click for more information
|
|
return to top
|
E-mail your listings or changes to events@laurin.com.
July 14-18 (Bellevue, WA ).
2008 Optical Design Using ZEMAX
Optical Design Using ZEMAX is perfect for first time users of ZEMAX who need an introduction to optical design, basic principles and techniques, and design of simple imaging optical systems. This course covers the basics of using ZEMAX, defining optical systems, optimization, ray aberration fans and other diagnostic tools, multiple configurations, apodization, vignetting, and an introduction to tolerancing.
|
|
Click for more information
|
|
return to top
|
July 14-16 (Nashville, TN ).
2008 Laser Safety Officer Training
A non-mathematical approach designed to teach the duties of Laser Safety Officer as described in the ANSI Z136.1 Safe Use of Lasers standard. Information on lasers and optics, bioeffects, beam and non-beam hazards, control measures and training requirements are covered. Emphasis is placed on laser safety program development and administration.This course meets all LSO training requirements outlined by ANSI, OSHA and ACGIH. Worth 3.0 ABIH CM Points, 32 CECs by AAHP and 3.0 BLS CM Points by the Board of Laser Safety.
|
|
Click for more information
|
|
return to top
|
July 15-18 (Cincinnati, OH ).
2008 Laser Safety Officer
This Rockwell Laser Industries intermediate level course provides an in-depth, analytical review of the LSO duties and requirements of ANSI Z136.1, OSHA, FDA-CDRH and state laser standards. After a review of the biological basis, the student will complete an in-depth computation workshop that covers MPE, AEL, NHZ and OD factors. Attendees are eligible for 4 ABIH Credits and 32 CECs awarded by AAHP.
|
|
Click for more information
|
|
return to top
|
E-mail your listings or changes to events@laurin.com.
August 11-13 (Denver, CO ).
2008 Laser Safety Officer Training
A non-mathematical approach designed to teach the duties of Laser Safety Officer as described in the ANSI Z136.1 Safe Use of Lasers standard. Information on lasers and optics, bioeffects, beam and non-beam hazards, control measures and training requirements are covered. Emphasis is placed on laser safety program development and administration.This course meets all LSO training requirements outlined by ANSI, OSHA and ACGIH. Worth 3.0 ABIH CM Points, 32 CECs by AAHP and 3.0 BLS CM Points by the Board of Laser Safety.
|
|
Click for more information
|
|
return to top
|
August 11-13 (Orlando, FL ).
2008 Advanced Concepts in Laser Safety
This course is designed for engineers, scientists, and safety professionals who are assigned Laser Safety Officer (LSO) duties and responsibilities. Individuals working in research and development centers, universities, or manufacturing environments that desire an in-depth, expert knowledge of laser safety issues and calculations will benefit greatly from this course. This course is worth 3.0 ABIH CM Points by the American Board of Industrial Hygiene, 32 CECs by the American Academy of Health Physics and 3.0 BLS CM Points by the Board of Laser Safety.
|
|
Click for more information
|
|
return to top
|
August 18-22 (Bellevue, WA ).
2008 Illumination and Stray Light Analysis Using ZEMAX
Illumination and Stray Light Analysis Using ZEMAX covers non-imaging design and analysis with ZEMAX, including non-sequential ray tracing, scattering, ray splitting, user defined sources/objects/surfaces, CAD import/export, gradient index media, diffractive optics, and other advanced non-sequential analysis and modeling capabilities of ZEMAX.
|
|
Click for more information
|
|
return to top
|
August 22-25 (Bad Herrenalb, Germany).
CFN Summer School 2008 on Nano-Photonics
The Fifth International Summer School of the DFG-Center for Functional Nanostructures (CFN) will focus on nano-photonics, one of the main areas of research at the CFN.
Invited experts from international and German research institutions will give thorough and in-depth introductions into this specific field as well as cover specialized research topics.
Although the CFN Summer School was originally established to address advanced graduate students and postdocs, senior scientists wishing to broaden their knowledge in the fields of nano-photonics are welcome to attend.
|
|
Click for more information
|
|
return to top
|
E-mail your listings or changes to events@laurin.com.
September 8-12 (Bellevue, WA ).
2008 Optical Design Using ZEMAX
Optical Design Using ZEMAX is perfect for first time users of ZEMAX who need an introduction to optical design, basic principles and techniques, and design of simple imaging optical systems. This course covers the basics of using ZEMAX, defining optical systems, optimization, ray aberration fans and other diagnostic tools, multiple configurations, apodization, vignetting, and an introduction to tolerancing.
|
|
Click for more information
|
|
return to top
|
September 8-10 (Pasadena, CA ).
2008 Introduction to Illumination Design Using LightTools®
This 3-day short course is a practical introduction to LightTools for engineers and scientists who wish to model and analyze the interaction of light with opto-mechanical systems. It assumes some familiarity with optical concepts and terminology. The course includes lectures, demonstrations, and hands-on computer workshop sessions.
|
|
Click for more information
|
|
return to top
|
September 9 (Loughborough, UK).
2008 Laser Safety Forum
A meeting to discuss advances in laser safety management. Includes presentations on topical laser safety issues and an open forum discussion session.
|
|
Click for more information
|
|
return to top
|
September 10 (Loughborough, UK).
2008 Laser Safety Refresher Course
A short course covering the essentials of Laser Safety Management for those who have already attended courses covering laser safety basics. Also intended as an up-date course for those who have attended the Laser Safety Officer course in the past.
|
|
Click for more information
|
|
return to top
|
September 11-12 (Pasadena, CA ).
2008 Advanced Topics in LightTools®: COM Macro Programming, Photorealistic Rendering, and Optimization
This 2-day course provides a practical overview of the LightTools Optimization Module, COM Macro Programming, and Photorealistic Rendering capabilities. The course includes lectures, demonstrations, and hands-on computer workshop sessions. Familiarity with LightTools basic features is assumed.
|
|
Click for more information
|
|
return to top
|
September 15-19 (San Francisco, CA ).
2008 Laser Safety Officer with Hazard Analysis Training
Designed to teach the knowledge required to perform the duties of Laser Safety Officer as described in the ANSI Z136.1 Safe Use of Lasers standard. Information on lasers and optics, applications, bioeffects, beam and non-beam hazards, hazard analysis, control measures and training on laser safety program development and administration. This course meets all LSO training requirements outlined by ANSI, OSHA and ACGIH. Worth 4.5 ABIH CM Points, 32 CECs by AAHP and 4.5 BLS CM Points by the Board of Laser Safety.
|
|
Click for more information
|
|
return to top
|
September 16-19 (Seattle, WA ).
2008 Laser Safety Officer
This Rockwell Laser Industries intermediate level course provides an in-depth, analytical review of the LSO duties and requirements of ANSI Z136.1, OSHA, FDA-CDRH and state laser standards. After a review of the biological basis, the student will complete an in-depth computation workshop that covers MPE, AEL, NHZ and OD factors. Attendees are eligible for 4 ABIH Credits and 32 CECs awarded by AAHP.
|
|
Click for more information
|
|
return to top
|
September 19-20 (Boston, MA ).
2008 Medical Laser Safety Officer
This course is designed to give the operating room personnel a basic foundation in laser biophysics and tissue interaction. Laser safety protocols will be addressed according to the ANSI Z136.3 Safe Use of Lasers in Health Care Facilities standard. Instruction is accomplished through didactics, lectures and discussions.This course is worth 13 Contact Hours, 2 ABIH CM Points, 13 CECs by AAHP and 2 BLS CM Points.
|
|
Click for more information
|
|
return to top
|
September 29-3 (Pasadena, CA ).
2008 Introduction to CODE V® for Image Forming Systems
This course covers the basics on modeling, analyzing, optimizing, and tolerancing optical systems using CODE V, including hands-on workshops. It assumes familiarity with optical concepts and terminology.
|
|
Click for more information
|
|
return to top
|
E-mail your listings or changes to events@laurin.com.
October 6-10 (Bellevue, WA ).
2008 Advanced Optical Design Using ZEMAX
Advanced Optical Design Using ZEMAX covers the design and analysis of more complex imaging systems, including local and global optimization, merit functions, thermal analysis, diffractive optics, polarization, advanced tolerancing, advanced analysis techniques, gradient index, fiber coupling, boundary conditions, birefringent media, and other topics. This course includes detailed coverage of the Physical Optics Propagation capability, with discussion of diffraction theory as well as many examples of physical optics analysis.
|
|
Click for more information
|
|
return to top
|
October 6-10 (Loughborough, UK).
2008 Laser Safety Management Course
A practical laser safety course covering the real issues within managing laser safety in any environment. A laser safety management program is developed during the course. Participants are assessed during the week and there is a final assessment paper. This course is ideal for anyone required to take on more complex issues of laser safety including those likely to be appointed Laser Safety Officers.
|
|
Click for more information
|
|
return to top
|
October 6-10 (Pasadena, CA ).
2008 Advanced Topics in CODE V®
This short course will give users of CODE V an opportunity to learn about and practice using a number of advanced topics and specialized techniques. You will learn how to solve current problems more effectively and also discover new applications for CODE V in your work.
|
|
Click for more information
|
|
return to top
|
October 7-10 (Boston, MA ).
2008 Laser Safety Officer
This Rockwell Laser Industries intermediate level course provides an in-depth, analytical review of the LSO duties and requirements of ANSI Z136.1, OSHA, FDA-CDRH and state laser standards. After a review of the biological basis, the student will complete an in-depth computation workshop that covers MPE, AEL, NHZ and OD factors. Attendees are eligible for 4 ABIH Credits and 32 CECs awarded by AAHP.
|
|
Click for more information
|
|
return to top
|
E-mail your listings or changes to events@laurin.com.
November 3-7 (Celebration, FL ).
2008 Optical Design Using ZEMAX
Optical Design Using ZEMAX is perfect for first time users of ZEMAX who need an introduction to optical design, basic principles and techniques, and design of simple imaging optical systems. This course covers the basics of using ZEMAX, defining optical systems, optimization, ray aberration fans and other diagnostic tools, multiple configurations, apodization, vignetting, and an introduction to tolerancing.
|
|
Click for more information
|
|
return to top
|
November 3-7 (Boston, MA ).
2008 Laser Safety Officer with Hazard Analysis Training
Designed to teach the knowledge required to perform the duties of Laser Safety Officer as described in the ANSI Z136.1 Safe Use of Lasers standard. Information on lasers and optics, applications, bioeffects, beam and non-beam hazards, hazard analysis, control measures and training on laser safety program development and administration. This course meets all LSO training requirements outlined by ANSI, OSHA and ACGIH. Worth 4.5 ABIH CM Points, 32 CECs by AAHP and 4.5 BLS CM Points by the Board of Laser Safety.
|
|
Click for more information
|
|
return to top
|
November 5-8 (Stanford, CA ).
4th Annual Small Animal Imaging Workshop 2008
A workshop on the science and practical issues of small animal imaging will be held at Stanford on November 5-8, 2008. The workshop will cover new commercially available small animal imaging systems (optical, radionuclide, x-ray, magnetic resonance, and ultrasound) and how researchers use these small animal imaging systems to study the molecular basis of disease noninvasively and aid in the discovery, development, and monitoring of novel molecular-based treatments.
|
|
Click for more information
|
|
return to top
|
November 11-12 (Loughborough, UK).
2008 Laser Safety Course
A practical introduction to laser safety and laser safety management. Intended for participants who have straightforward laser applications or who have additional support. The course is ideal for general safety officers and users of laser products.
|
|
Click for more informat | |
