The IntelliDrill 30 series intelligent laser drilling heads for drilling circuit boards, for perforating foils and for texturing surfaces have been unveiled by Scanlab AG. The scan modules for CO₂ lasers are equipped with beryllium deflection mirrors and with two digital servo control boards and a digital interface board. They have a 30-mm aperture and achieve beam displacement of 37.12 mm. Small vector response at a 1-mm pitch is 0.8 ms and at 10-mm pitch, 2.3 ms. Repeatability is <22 μrad, long-term drift over 8 h is <0.6 mrad after warm-up, typical scan angle is ±0.26 rad, gain error and zero offset are both <5 mrad, and nonlinearity is <3.5 mrad. Operating temperature is 25 ±10 °C.

To contact the manufacturer of this product, click here.

Start a discussion on this article or any photonics topic in the Photonics.com Community Forum