The TriAccess Technologies TAT6254C video receiver provides a low noise analog interface to optical photodiodes. The TAT6254C is intended for use in single family unit (SFU) analog video fiber to the premises (FTTP) applications.

The TAT6254C exhibits low input noise and distortion that provides performance margin critical to meeting stringent FTTP link requirements. The TAT7460 addresses emerging CATV, FTTH (fiber to the home), and satellite frequency applications for home and infrastructure deployments. It is a general purpose, single-ended, 75-Ohm CATV RF amplifier designed for up to 2600-MHz bandwidth in CATV satellite and video ONU receiver applications.

The TAT7464 is a push-pull CATV amplifier designed for higher output applications, such as switched digital video edge QAM (quadrature amplitude modulation) outputs as well as multiple dwelling units (MDU) and other fiber-deep receiver applications. It uses the core technology of the TAT7460 to maximize output in a push-pull configuration and is a general purpose, single-ended, 75 Ohm CATV RF amplifier for use up to 2600-MHz bandwidth. In some applications, the new TAT7464 has been able to reduce power consumption by as much as 40  to 50 percent.