Photonics Spectra BioPhotonics Vision Spectra Photonics Showcase Photonics Buyers' Guide Photonics Handbook Photonics Dictionary Newsletters Bookstore
Latest News Latest Products Features All Things Photonics Podcast
Marketplace Supplier Search Product Search Career Center
Webinars Photonics Media Virtual Events Industry Events Calendar
White Papers Videos Contribute an Article Suggest a Webinar Submit a Press Release Subscribe Advertise Become a Member


Blue Diodes Get Ultrashort Pulses

Michael D. Wheeler

PicoQuant GmbH has introduced a blue diode laser system with a picosecond pulse width and high repetition rate that may prove useful as an excitation source in time-resolved fluorescence research.

The German company has taken the Japan-based Nichia Chemical Industries Ltd.'s blue diode laser and applied its own proprietary technique to create ultrashort pulses, resulting in a commercially available laser with a 50-ps pulse, a repetition rate up to 40 MHz and a center wavelength at 400 nm. The average power is 1 mW, with a peak power of up to 400 mW.

Biochemical analysis

The commercial availability of these diode lasers could mean good news for those performing time-correlated fluorescence spectroscopy, a powerful tool used in biochemical analysis, such as identifying a single antigen or strand of DNA. The technique derives its sensitivity from measuring the short time it takes for a given fluorophore to decay. The problem arises in attempting to record the time-decay profile of the signal from a single excitation-emission cycle. Typical fluorescence from organic fluorophores lasts only a few hundred picoseconds to a few nanoseconds, placing a stringent demand on the excitation source and detector.

Finding a short-wavelength excitation source with ultrashort pulses and enough power was a particularly thorny problem. In the past, the common sources were nanosecond flashlamps and Ti:sapphire or argon-ion lasers. Although inexpensive, flashlamps had low repetition rates and low power. Frequency-doubled Ti:sapphire or argon-ion dye lasers were an improvement, but they were bulky and prohibitively expensive.

"These systems have been around for a while and are intended for people well-trained in optics and electronics," said Steve Soper, an assistant professor at Louisiana State University in Baton Rouge, who installed a Ti:sapphire for time-correlated single-photon counting several years ago.

"Between the optical table, laser, optics and electronics, the cost was about $160,000. Now with a pulsed diode, you're looking at a much lower cost," he said.

Although PicoQuant's blue diode lasers have been available for only weeks, Soper said they could have a large impact on areas like DNA sequencing and other bioanalytical research.

"One of the big points with our system is it's cheap and easy to handle," said Michael Wahl, a senior scientist at PicoQuant. The company has already received the first orders for the lasers, which will initially cost less than $20,000.

Explore related content from Photonics Media




LATEST NEWS

Terms & Conditions Privacy Policy About Us Contact Us

©2024 Photonics Media