Micronic Sells Laser Pattern Generator to Photronics

Optical technology company TRUMPF is reorganizing its management bodies with changes set to take effect with the start of the new fiscal year July 1. Jürgen Hambrecht, current chairman of the...

In-Place Machining (IPM), a provider of measurement and alignment services, has acquired East Coast Metrology (ECM), a contract measurement company. The acquisition is part of IPM’s long-term...

A research group from Japan Advanced Institute of Science and Technology (JAIST) developed light-activatable, liquid metal (LM) nanoparticles for cancer diagnosis and treatment via...

Ultrafast optical imaging is typically measured in picoseconds, whereas high-speed electronic cameras image at the millisecond and microsecond timescale. To bridge the gap between these technologies,...

The CC200-Tx Series from Metrio Sensors Inc. are VCSEL array boards that are connected to their own drivers. They can switch up to 100 MHz and include 435 lasers in a 17 × 29 array driven by...

High-brightness blue diode laser from PhotonTec Berlin is scalable up to 180 W from a fiber core as small as 100 μm. This OEM module comes with water-cooling baseplate with red aiming beam,...

The Chromatiq Spectral Engine™ from Hamamatsu Photonics generates light with a highly specific spectral content to emulate real-world lighting conditions and other custom spectra to meet...

The TruTool PS 100 part separator tool from TRUMPF SE & Co. KG removes small parts quickly and easily from the scrap skeletons of 2D laser cutting machine processed sheets. The...

Over 60 years have passed since the first demonstration of a laser in 1960. After the initial spark of interest, lasers were for a while categorized as “a solution waiting for a problem,”...

When purchasing an industrial laser system, the astute buyer will look for a Class 1 laser product — a system where the laser beam hazard is completely enclosed and there is no potential laser...

Many linear materials proceseqsing applications call for lasers with continuous-wave (CW) output. For example, early stereolithography systems were based on CW lasers such as argon-ion or HeCd. To...

Neodymium-doped crystals and glasses such as Nd:YAG (neodymium:yttrium aluminum garnet) have long been used as laser gain materials. Optically pumped, they produce an output wavelength close to 1...

The market for the tunable light source is ever expanding due to its uses in countless fields, such as the inspection industry, machine visioning, and a wide range of optical experiments....

OEM dpss laser from lumispot tech, in this file, we mentioned the datasheet of the cw and qcw diode pumped solid state lasers, including its features, working principle and applications.

Carbon dots (C-dots) are nanoparticles composed of carbon with diameters below 10 nm. They were accidentally discovered in 2004 by Xu, et al1 when researching methods to purify carbon nanotubes....

Block Engineering's widely tunable mid-infrared Quantum Cascade Lasers are designed for use by researchers and manufacturers. Our next generation design features a six-fold increase in laser power,...

Branko Petrov explores individual trends in lidar emitters and how they are advancing the performance and adoption of automotive lidar systems. He explains how edge-emitter lasers remain the most...

Fiber lasers are pivotal to many processes in the e-mobility manufacturing chain. Jack Gabzdyl discusses several fiber laser applications. In battery manufacture, fiber lasers are extensively used in...

Lithium-ion (Li-ion) batteries are a key factor driving rapid growth in many diverse technology sectors, from electric vehicles to consumer electronics. A key hallmark of the technology is the...

The networking and computing application landscape is evolving to be cost effective, bandwidth dense, and power efficient. These new requirements bring optics and electronic processors closer...

A laser crystal, also known as an active medium or gain medium, is a solid-state material used in the construction of lasers. The primary function of the laser crystal is to amplify light by...

A femtosecond laser is a type of laser that emits ultrashort pulses of light with durations on the order of femtoseconds, where one femtosecond is equal to 10-15 seconds. These lasers are capable of...

The laser damage threshold refers to the maximum level of laser intensity that a material can withstand without experiencing damage. It is a critical parameter in laser applications and is...

An Er:YAG laser is a type of solid-state laser that uses a crystal made of erbium-doped yttrium aluminum garnet (Er:Y3Al5O12) as the gain medium. The erbium (Er) ions are introduced into the crystal...

Telecentric Lenses are widely used in metrology instruments, laser marking systems, and AOI (Automatic Optical Inspection) machines. Here’s a 360 view of one of our custom Telecentric Lenses which...

New start, new image BWT provides you with unchanging high-quality products and services. We are committed to becoming a global leader in laser solutions, let the dream drive the light, and inspire...

Edinburgh Instruments is a world-leader in both single photon counting and time correlated single photon counting (TCSPC) based fluorescence spectrometers. Our product range includes: FLS1000...

At the exhibition, BWT exhibited more than 20 types of diode lasers, fiber lasers, and ultrafast lasers.

A fiber laser is a type of laser in which the active gain medium is an optical fiber doped with rare-earth ions such as erbium, ytterbium, or neodymium. Fiber lasers generate coherent light through...

FOCtek provides customers with all types of custom manufactured lenses, Precision Optical Components, Polarizing Optics, Prisms, Filters, Coatings, Optical Systems, Crystals, Nonlinear Crystals,...

OHARA manufactures more than 130 environmentally safe optical glass types, free of both lead and arsenic. More than 300 tons of optical glass are melted per month, available in the following forms of...

Established in 1985, OZ Optics is a leading worldwide supplier of fiber optic components, test equipment and sensors. OZ Optics manufactures its products in three locations, Ottawa (Canada),...

LASER SAFETY • Eyewear • Barriers • Windows • Training laservision USA designs and manufactures a comprehensive assortment of custom-made laser safety eyewear that attenuates...