Edmund Industrial Optics Announces Optical Prototyping Services

Using machine learning and an established mathematical model, scientists at the National Institute of Standards and Technology (NIST) developed a machine learning-based algorithm to predict drift in...

Courtesy of iStock.com/MotoEd. After years of investment and research, light-emitting diodes (LEDs) are cheaper and brighter than ever before, and they consume less power. With reliability...

Aerospace and automotive manufacturers initially adopted additive manufacturing (AM) methods as a means to rapidly prototype new parts or to fabricate more complex or consolidated components in a...

Optica awarded the Edwin H. Land Medal to Susana Marcos, the David R. Williams director of the Center for Visual Science at the University of Rochester. Marcos is a co-founder of 2EyesVision SL and a...

The GVM-095-051-01 from Moticont is a linear voice coil servo motor that can be used in applications such as wafer handling, optical focusing, valve actuation, and antenna positioning. The brushless...

The Dione 320 LWIR core from Xenics NV is a 320 × 240 device optimized for smaller size, lower weight, lower power, low cost, and high performance. Designed as an entrance point for...

Specim’s next-generation NIR line-scan hyperspectral camera, the Specim GX17, features a maximum frame rate of 800 Hz with 480 spatial pixels, which is 50% more than conventional QVGA...

The Omni Pro 12 Live-Cell Imaging Platform from Axion BioSystems Inc. features integrated robotics and a multi-plate design compatible with any standard incubator for scientists and drug developers...

One of the most critical elements of any time-resolved spectroscopy and dynamics experiment is the optical delay line. A typical optical delay line consists of a retroreflector or folding mirrors on...

Optical fibers are made from either glass or plastic. Most are roughly the diameter of a human hair, and they may be many miles long. Light is transmitted along the center of the fiber from one end...

An optical coating engineer is frequently confronted with a difficult specification for a coating. Often the difficulty in the specification results from the particular form of the optical system. If...

What are thin-film coatings? The purpose of any optical thin-film coating is to modify the transmittance and reflectance properties of the substrate material to which they are applied. Most coatings...

Advanced Image Intensifier adapter for low light level imaging applications, the Cricket™² is a plug & play camera attachment enabling low light level imaging and extreme high shutter speeds for CMOS...

We started developing FACs more than 15 years ago. The result is highly automated in-house processes which allow for competitive prices – even with high volumes. Diode lasers are efficient, compact,...

This white paper, titled "Advanced SWIR Spectroscopy for Next-Generation Fabric Identification," addresses the challenges in textile sorting, especially in the context of recycling non-biodegradable...

OEM dpss laser from lumispot tech, in this file, we mentioned the datasheet of the cw and qcw diode pumped solid state lasers, including its features, working principle and applications.

This presentation spans the arc of state-of-the-art polishing methods best suited to meeting quality requirements for different optical systems, including those with medical applications and those...

Modern computer numerical control (CNC) polishing has revolutionized optical component manufacturing by enabling both more precise and wilder surface shapes to be deterministically manufactured....

Fiber-optic sensors (FOS) have been developed extensively over more than four decades. They have been refined to address a range of challenging industrial applications—usually where...

Machine vision technology is key to efficiently manufacturing a wide range of products today, from semiconductors to appliances to beverage containers. A crucial first step in any good machine vision...

Gain-switching is a technique used in lasers to generate short pulses of light by modulating the gain of the laser medium. This method is distinct from Q-switching and mode-locking, two other common...

An infrared lens is an optical component specifically designed and optimized for transmitting, focusing, or manipulating infrared (IR) radiation within the infrared spectrum. These lenses are used in...

An intensified charge-coupled device (ICCD) camera is an advanced imaging device that combines the capabilities of both an image intensifier and a charge-coupled device (CCD) sensor to achieve...

A fiber optic cable assembly refers to a complete unit consisting of optical fibers, connectors, protective jackets, and other components that are assembled together to facilitate the transmission of...

Aspheres have allowed optical designers to create systems and products that push the limitations of performance across several fields. In this presentation, we will explain the various processes...

For more information, please follow our SOCIALS: Linkedin YoutubeFacebook Twitter Website Email

As the demand for fluorides and other high expansion materials increases, it is important to understand the risks/challenges involved with these materials and how they affect various factors such as...

To celebrate this milestone, we've created a video showcasing the journey to the new design. We invite everyone to #joinus and watch the video now! The new DayOptics image is a testament to our...

A fiber laser is a type of laser in which the active gain medium is an optical fiber doped with rare-earth ions such as erbium, ytterbium, or neodymium. Fiber lasers generate coherent light through...

The LaCroix name is synonymous with quality precision optics. Since 1947, three generations of family leadership have guided LaCroix Precision Optics to become the premier precision optics...

Baumer Group is a manufacturer of sensors, encoders, measuring instruments, and components for automated image processing. Baumer combines innovative technologies and customer-oriented service into...

Teledyne DALSA is a part of Teledyne’s Vision Solutions group and a leader in the design, manufacture, and deployment of digital imaging components for machine vision. Teledyne DALSA image...

For over 30 years, Allied Vision has helped people see the bigger picture to achieve their goals. We believe knowledge is power and always strive to deliver valuable insight with our technology...