Dow and Osram Sign Supply Agreement

Perovskite technology developer Caelux closed a $12 million series A3 funding round. The company’s series A total of $24 million will be allocated to support its factory ramp, R&D, and...

Photocatalysts show the potential to be used in energy generation and environmental detoxification applications. This is an intriguing quality, since reducing energy use in bulk industrial processes...

Operating a chain saw poses an inherent risk that even the most experienced user is aware of and accepts. But what if the tool were a laser-based rust remover? These hand-held systems can have...

With the development of a single-layer, blue-emitting OLED, researchers at the Max Planck Institute (MPI) for Polymer Research demonstrated that one-layer OLEDs can achieve a performance level...

The RTI NEO 12 from Laserworld AG is a powerful laser beam array bar with scanners, offering higher power and improved visibility over its predecessor. With 12-W power and a color balance of 6...

The GP-CVM600P series of 600-W LED constant voltage drivers from GlacialPower include nondimming, 3-in-1, and DALI-2 dimming versions. The direct-current output voltages include 12, 24, 36, 48,...

The OSTAR® Projection Power LE xx P1MS/AS LEDs from ams OSRAM are made for use in mini projectors and are based on 0.33-in. digital light processing imagers. Available in blue, amber, deep blue,...

The dual-lens TSMP95000 and single-lens TSMP96000 and TSMP98000 from Vishay Intertechnology are miniaturized infrared (IR) sensor modules for remote control systems that combine a wide supply voltage...

An integrating sphere’s function is to spatially integrate radiant flux (light). However, before one can optimize a sphere design for a particular application, it is important to understand how...

An optical time-domain reflectometer sends short pulses of light into a fiber and measures its reflections as a function of time. The delay of these reflections to the detector as well as their...

To Isaac Newton the problem was clear, and in 1704 he realized the effects of atmospheric turbulence on image formation. Just as heat waves shimmering above a hot patch of ground can distort our...

High-brightness LEDs have found their way into applications such as signs and displays, cell phone flash modules, automotive lighting and general illumination. Some applications, however, such as...

The food supply chain has grown more complicated over the past 50 years. The consumer may believe that the "farm fresh" sign in the market is true. But with the number of steps in the process to get...

Industrial laser materials processing is constantly evolving. Industries as varied as pharmaceutical, consumer electronics, automotive, aerospace, and textiles, among others, have benefited from new...

Over the past few years the capabilities of smart cameras have increased dramatically. Available image resolution has increased from 5 megapixels maximum to 21 megapixels. Processing power has...

Free Webinar Additional Questions & Answers from the Webinar below: Speakers: Dr. Robert R. McLeod Associate Professor and Graduate Director Electrical, Computer and Energy...

A CMOS camera refers to an imaging device that employs a complementary metal-oxide-semiconductor (CMOS) image sensor to capture digital images. CMOS cameras have become ubiquitous due to their low...

Area scan, in the context of imaging and cameras, refers to a method of capturing an entire two-dimensional image in a single snapshot or exposure. Unlike line scan, which captures images one line at...

A CCD image sensor that uses a proximity-focused image intensifier to provide greater sensitivity at low light levels.

A detector array refers to a collection of individual detector elements arranged in a two-dimensional grid or matrix format. Each element within the array is capable of detecting electromagnetic...

-Laser Blood Clotting -Plasmonic Polymer LEDs -Solar Steam This week on Light Matters: A laser-controlled switch turns blood clotting on and off; plasmonics gives a performance boost to polymer LEDs...

In this month's Light Matters Extra, we give you an in-depth look at North America's largest optical fabrication exhibition and show – Optifab 2017. 188 companies filled the showroom floor of the...

On this month's episode of Light Matters, we take you to the South by Southwest (SXSW) Trade Show in Austin, Texas, as new photonics innovations hit the show floor of the Austin Convention Center....

On this month's episode of Light Matters, we take you to central Massachusetts as Worcester Polytechnic Institute and Quinsigamond Community College take on a comprehensive joint photonics laboratory...

A CCD camera, or charge-coupled device camera, is a type of digital camera that utilizes a CCD image sensor to capture and record images. CCD cameras are widely used in various applications,...

A helmet-mounted display is a compact optical projection system, mounted on or built into a helmet, and used to project data or a scene directly into the eyes of the wearer. Also called visually...

A diode laser is a type of laser that uses a semiconductor diode as the active medium to generate coherent light. Semiconductor diodes are electronic devices that conduct electricity primarily in one...

Lumispot Tech, a leading scientific and technical enterprise, specializes in advanced rangefinder module, laser diode, LiDAR laser source, DPSS laser, solid-state, and fiber lasers, as well as...

LASOS builds high quality products to serve industry and research with the right tools of manufacturing, measuring, analysis, and inspection. LASOS is able to adapt customer’s requirements and...

G&H is a world leader in optical designing, testing, and manufacturing. As experts in the technology of light, G&H works with customers to provide optical systems, assemblies, and components...

RPMC Lasers Inc is a leading laser distributor in North America. We offer only diode lasers, laser modules, diode and lamp-pumped lasers, and fiber lasers (no systems). We sell at the manufacturers'...