Lamina CEO Leaving to Form New LED Venture

Light-scattering nano-elements, also known as nanoantennas due to their ability to harness light, are used as an optical control technology in nanophotonics. In combination with a phosphor plate, and...

The development of light-emitting diode (LED) lighting has been a great success story of our times. LEDs are nearly ideal light sources that have largely replaced other lighting technologies, except...

Confocal and multiphoton microscopy are commonly used to provide 3D-resolved images of in vitro or in vivo tissue samples without physical sectioning. But there are also inherent trade-offs in the...

Studies cited by the Independent Institute for Highway Safety (IIHS) show that using automatic switching on old-fashioned high beams whenever possible reduces nighttime automotive crashes with...

The New Energy Light Module (NELM) from New Energy is built with CREE LEDs and is a replacement for the discontinued CREE LED LMH2s. A solution for area illumination and commercial lighting spaces,...

Among the numerous techniques used for extracting 3D information from scenes, Euresys' Photometric Stereo is a function estimating the orientation and albedo of each point of a surface by acquiring...

The LUX 3030 and 2835 from Luminus Devices are LEDs with KSF narrow-band red phosphor technology. The LEDs deliver a 120° typical viewing angle and minimum 90 color rendering index (CRI) with a...

Lambda Research Corporation is proud to announce the release of TracePro 2022, the latest release of our award winning TracePro software. TracePro 2022 incorporates many new and improved features...

High-brightness LEDs have found their way into applications such as signs and displays, cell phone flash modules, automotive lighting and general illumination. Some applications, however, such as...

An integrating sphere’s function is to spatially integrate radiant flux (light). However, before one can optimize a sphere design for a particular application, it is important to understand how...

The market for flat panel displays (FPDs) has undergone tremendous growth, driven mostly by increased demand for televisions, cell phones, computers, digital cameras and MP3 players. Similarly,...

In the beginning, automated inspection focused on the camera and optics, the algorithms, the interface hardware and the processor. Only rarely was attention paid to the lighting system or lighting...

Answering some common questions new users of optical design and analysis software have are “How accurate are the results?” or “Can I trust the results I get?” and discussing the importance of...

The optoelectronic properties of an OLED device are mapped using an RMS1000 Confocal Raman Microscope in spectral and time-resolved photoluminescence and electroluminescence imaging modes. These...

This webinar is intended to be a primer on practical spectral design. It will begin with a short review of the most promising spectral technologies and the current state-of-the-art. The presenters...

Solid-state, white-light illumination is furthering the capabilities and lifetimes of analytical instruments. Life and material sciences alike benefit from performance enhancements conferred to...

Lasers, LEDs, and photonics in general are providing new dimensions to industrial automation solutions, far beyond illumination and material treatment. They enable open work-cell production setups as...

Industrial laser materials processing is constantly evolving. Industries as varied as pharmaceutical, consumer electronics, automotive, aerospace, and textiles, among others, have benefited from new...

LiFi, short for light fidelity, is a wireless communication technology that utilizes visible light or infrared light to transmit data. Developed as an alternative or complementary technology to...

Gallium nitride (GaN) is a compound made up of gallium (Ga) and nitrogen (N). It is a wide-bandgap semiconductor material that exhibits unique electrical and optical properties. Gallium nitride is...

Gallium nitride-based light-emitting diodes (GaN-based LEDs) are semiconductor devices that emit light when an electric current passes through them. These LEDs are constructed using gallium nitride...

A laser crystal, also known as an active medium or gain medium, is a solid-state material used in the construction of lasers. The primary function of the laser crystal is to amplify light by...

-Brighter LEDs -Curing Alzheimer’s -Mapping Ice Melt This week on Light Matters: Phosphors are optimized for better and brighter LEDs, Lasers might be the cure for brain diseases such as Alzheimer's...

In this episode, we take you to the stage with a professional lighting designer who uses the latest technologies to create the ambience of theatre productions. And we take a look at just how...

Video definition of LED presented by Dan Courtney, Three Rivers Community College.

In this episode, we take you to a U.S. National Science Foundation Engineering Research Center at Rensselaer Polytechnic Institute in New York. Researchers there are leading the charge for "smart"...

An infrared light-emitting diode (IR LED) is a semiconductor device that emits infrared light when an electric current passes through it. Similar to standard LEDs that emit visible light, IR LEDs are...

Opto Diode Corporation (Camarillo, CA), an ITW Company, delivers industry-leading sensors, photodiodes, IR detectors, photonic modules, assemblies, and LEDs. Available in standard and custom designs,...

ProPhotonix offers OEMs a complete illumination solution for LED and Laser requirements. With more than 25 years’ experience in developing OEM LED systems and laser modules, ProPhotonix has...

EcoGlass, a.s., Czech-based company grounded in the best tradition of Czech glassmakers, engaged in manufacturing of precision glass components dedicated to lighting applications for automotive...

Boston Electronics specializes in products related to photo-detection and photon generation, especially, including Detectors, Sources, and Signal Processing Electronics. Photodetectors for the IR,...