Search
Menu
Gentec Electro-Optics Inc   - Measure With Gentec Accuracy LB

Gold Nanoparticles Prove to be Hot Stuff

Facebook X LinkedIn Email
Gold nanoparticles are highly efficient and sensitive handles for biological molecules being manipulated and tracked by lasers, but they also can heat up fast -- by tens of degrees in just a few nanoseconds -- which could either damage the molecules or help study them, according to scientists at JILA, a joint institute of the National Institute of Standards and Technology (NIST) in Gaithersburg and the University of Colorado at Boulder.NISTnanobead.jpg
A gold nanobead, trapped with 205 mW of infrared laser light, heats up to about 75 °C or 167 °F (shown in dark red) and the temperature in the surrounding area gradually cools off (the purple area is about 27 °C or 81 °F). (Image: Yeonee Seol/JILA)
Biophysicists often study nanoscale and even picoscale mechanics by using lasers to both apply force to and track the position of fragile biomolecules such as DNA or protein by manipulating a tiny sphere -- typically polystyrene -- attached to the molecule. The JILA team would like to find new microsphere materials that can be trapped by laser radiation pressure more efficiently, which would enable faster measurements and detection of smaller motions at the same laser power.

As described in the Aug. 15 issue of Optics Letters, the JILA team demonstrated that 100-nm-wide gold beads, as expected because of their metallic nature, can be trapped and detected six times more easily than polystyrene particles of a similar size.

However, the scientists also found that gold absorbs light and heats up quickly, by a remarkable 266 degrees (Celsius) per watt of laser power, at the wavelength most often used in optical traps. Unless very low laser power is used, the heat could damage the molecules under study. Thus, gold beads would not be useful for temperature-sensitive experiments or applying force to molecules. But the heating effect could be useful in raising local temperatures in certain experiments, such as heating a protein just enough to allow scientists to watch it unfold, the paper suggests.

The work was supported by a W.M. Keck grant in the RNA Sciences, a Burroughs Wellcome Fund Career Award in the Biomedical Sciences, a National Institutes of Health training grant, the National Science Foundation and NIST.

For more information, visit: www.nist.gov

Rocky Mountain Instruments - Custom Assemblies MR

Published: September 2006
Glossary
infrared
Infrared (IR) refers to the region of the electromagnetic spectrum with wavelengths longer than those of visible light, but shorter than those of microwaves. The infrared spectrum spans wavelengths roughly between 700 nanometers (nm) and 1 millimeter (mm). It is divided into three main subcategories: Near-infrared (NIR): Wavelengths from approximately 700 nm to 1.4 micrometers (µm). Near-infrared light is often used in telecommunications, as well as in various imaging and sensing...
polystyrene
A plastic used in molded optical components. Styrene elements can be combined with acrylic elements to produce achromatic lenses.
beadsgoldinfraredJILAmicrospherenanobeadnanoparticlesNews & FeaturesNISTpolystyreneLasers

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.