Ronald Snartland to Manage Tucson Prototron Facility

Empire State Development has named the 10 companies selected to participate in round seven of the Luminate NY accelerator program, investment fund, and competition. Each finalist will receive an...

Germany’s Federal Ministry of Education and Research is funding the establishment of the Leibniz Centre for Photonics in Infection Research (LPI) at the Jena University Hospital. The center...

Researchers from Rice University and University of Maryland have created full-motion video technology that could enable cameras to peer through fog, smoke, driving rain, murky water, skin, bone, and...

Multifield imaging is a new imaging technique that enables the simultaneous capture of multiple images under various lighting conditions. Coupled with time delay integration (TDI), this emerging...

The TAGARNO T50 from TAGARNO is a 4K digital microscope that uses Sony ISS’s FCB-ER9500 camera. The collaboration allows for a digital microscope that can capture live images at 60 fps. The...

The compact ROCK VIS and VIS-NIR spectrometers from Ibsen Photonics are designed for blood gas analysis. The devices feature a form factor of 75 × 50 × 30 mm, high throughput, and...

The third-generation range of Mantis ergonomic optical stereo microscopes from Vision Engineering Ltd. feature improved optics for hand-to-eye coordination and depth perception. The microscopes...

The 3DS3000, a modular 3D laser scanning measurement and inspection system from Bold Laser Automation Inc. is designed for quality assurance processes. The system combines advanced 3D laser...

The digital camera represents an integration of optics, mechanics and electronics consisting of three layers (Figures 1a, b and c). The top and the middle layers are printed circuit boards (PCBs),...

Since their invention in the late 1960s, charge-coupled devices, also called CCDs, have found widespread use in imaging applications. Electronic cameras based on CCD technology are used in...

The wavelength range of commercially available LEDs with single-element output power of at least 5 mW is 275 to 950 nm. Each wavelength range is made from a specific semiconductor material family,...

Over 60 years have passed since the first demonstration of a laser in 1960. After the initial spark of interest, lasers were for a while categorized as “a solution waiting for a problem,”...

Development and production of a miniaturized camera with maximum resolution and flexibility. The dimensions of the components that enter the body are said to be as low as possible in order to shorten...

UV-Vis spectrophotometry is a simple and efficient technique for the analysis and evaluation of the quality of olive oil. Extra virgin, virgin, and lower-quality olive oils can be distinguished by...

Overview of PZ-2000 FT.

This whitepaper looks at the unique challenges associated with optical systems by exploring two extremes, an ultra-high precision instrument, and a low-cost consumer product, and the different...

The properties of light that stimulate the eye and build our visual perception also guide the design of illuminated devices. Thanks to well-established scientific methods, we can quantify the human...

Photoacoustic imaging is a hybrid imaging modality that combines both optics and ultrasound. With rich intrinsic optical contrast and high ultrasound resolution at depth, photoacoustic imaging has...

Increasingly, photodetectors capable of detecting single photons are demanded by modern applications, including quantum computing, time-of-flight lidar, and dark matter detection. These applications...

The publishers of BioPhotonics invite you to attend a free virtual conference spanning three days. The BioPhotonics Conference will feature insights and innovations in microscopy, spectroscopy, flow...

Temporal jitter at a signal's receiver when amplified noise causes frequency shifts, as with a soliton traveling through an erbium-doped fiber amplifier.

1. In relation to cathode-ray tube displays, errors in the signal's amplitude, phase or both that result in small, rapid aberrations in size or position of the image. 2. Errors of synchronization...

A slab-shaped, very low profile package for electronic components; often used when printed circuit boards must be closely stacked together.

In infrared imaging systems used for mass screening of printed circuit boards or other quality control applications, an image of an ideal component that is stored in the system's memory and then...

Check out our new video tutorial on how to clean spherical lenses! Our latest video breaks down the step-by-step process for effectively cleaning spherical lenses, ensuring crystal-clear images every...

For more information, please follow our SOCIALS: Linkedin YoutubeFacebook Twitter Website Email

To celebrate this milestone, we've created a video showcasing the journey to the new design. We invite everyone to #joinus and watch the video now! The new DayOptics image is a testament to our...

For all their precision of movement, we can't always count on robots to handle objects with care. But fiber optic sensors could give machines a more human sense of touch. See how – this month on...

Established in 1985, OZ Optics is a leading worldwide supplier of fiber optic components, test equipment and sensors. OZ Optics manufactures its products in three locations, Ottawa (Canada),...

The Optical Engineering Experts® Optikos designs and manufactures metrology products for measuring and assuring optical image quality; and provides optical engineering design, development,...

CASTECH is a recognized leading supplier of nonlinear optical crystals, laser crystals and precision optical components for laser, telecom, medical, analysis and detector markets. Products...

The LaCroix name is synonymous with quality precision optics. Since 1947, three generations of family leadership have guided LaCroix Precision Optics to become the premier precision optics...