Microsystem Incubates Cells
BALTIMORE, Oct. 3, 2007 -- By integrating silicon microchip technology with a network of tiny fluid channels, some thinner than a human hair, engineers have developed a thumb-sized microincubator to culture living cells for lab tests.
Researchers at The Johns Hopkins University reported that they had successfully used the microincubator to culture baby hamster kidney cells over a three-day period. They said their system represents a significant advance over traditional incubation equipment used in biology labs, which has remained largely unchanged for the past 100 years.
Johns Hopkins University engineers Jennifer Blain Christen, a postdoctoral fellow, and Andreas G. Andreou, a professor in the Department of Electrical and Computer Engineering, have developed a device that combines microfluidics and microelectronics to culture living cells for lab tests. (Photos courtesy Will Kirk/JHU)
“We don’t believe anyone has made a system like this that can culture cells over a period of days autonomously,” said Jennifer Blain Christen, co-inventor of the device. “Once it’s set up, you can just walk away.”
The incubator’s microchannels, fabricated in a soft silicone polymer material, allow researchers to easily insert and guide cells and nutrients during experiments, while the computer-controlled electronics keep the cells at the precise temperature that enables them to multiply and thrive. The tiny incubator’s transparent design makes it easy to view the cells through a microscope or camera equipment without disrupting the conditions that help the cells flourish.
The self-contained microincubator developed at Johns Hopkins represents a significant advance over traditional incubation equipment used in biology labs for the past 100 years. A syringe is used to inject living cells and nutrients into the device.
Blain Christen spent the past three years working on the microelectronic and microfluidic device as the focus of her doctoral dissertation in the Department of Electrical and Computer Engineering in Johns Hopkins’ Whiting School of Engineering. She received her degree in May and has continued to fine-tune the device while working as a postdoctoral fellow.
Andreas G. Andreou, a professor in the department who served as Blain Christen’s doctoral adviser, said, “This device represents a unique blend of two technologies, and we believe it will have a great impact on biology lab testing and research.”
Cell culture techniques in biology labs haven't changed much since the early 20th century. Living cells and nutrients are put into a lab dish and then are placed inside a traditional incubator, a heating compartment that is typically the size of a small refrigerator. The environment within the unit must stay at a constant temperature, free of contaminants and with the proper levels of humidity, oxygen and carbon dioxide. Whenever the lab dish is removed for observation or experiments, however, these optimal conditions are disrupted, and the cells begin to die.
In contrast, the Johns Hopkins microsystem is self-contained and requires no external heating source. A drop of liquid containing living cells is injected into a port and flows through one of the microfluidic channels. A nutrient solution -- the cells’ food -- is added in the same way.
Another view of the microincubator.
The cells gravitate toward and stick to the surface of the microchip. The chip contains a simple heating unit -- a miniature version of the type found in a toaster -- and is equipped with a sensor that continually checks to make sure the proper temperature is maintained. For human cells, this is usually 37 °C or 98.6 °F. The chip is connected to a computer that controls the sensing and heating process. The prototype is connected to a computer via a hard wire, but the inventors said a wireless version would be the next step.
A gas-permeable membrane on the incubator allows the microsystem to exchange carbon dioxide and oxygen but keeps out bacteria that could contaminate the cell culture. If a cell colony grows too large, an enzyme can be injected into one of the microfluidic ports to detach and flush away surplus cells without destroying the primary cell culture.
The incubator’s small size provides several advantages, the researchers said. The unit can easily be moved to different microscopes, imaging devices or other experimental tools without jeopardizing the health of the cell culture. Its size and relatively low cost should allow biologists to run numerous experiments simultaneously in a small space. Because it can be powered by batteries, the microincubator could be used outside a traditional lab for field tests. “Also,” said Blain Christen, “because it’s so small, we can change the temperature of the cell culture environment very quickly. We can go from room temperature to 98.6 degrees in less than a tenth of a second.”
A diagram depicting the inner workings of the microincubator . (Illustration by Jennifer Blain Christen)
The device was designed not only to provide these capabilities but to do so in an eco-friendly manner. This was achieved by minimizing the size of components with fabrication techniques that adversely affect the environment. These components were also designed so that they can easily be reused in other devices.
Blain Christen and Andreou said environmental impacts should be an important consideration in all types of research. “In our own field, among researchers who are working at the interface between electronics and biology, we believe our approach – making ecological considerations integral to our design – is rather uncommon,” said Blain Christen. “But we also believe this approach is one that all engineers should be adopting.”
Blain Christen and Andreou are continuing to refine and enhance the microincubator. They said they hope to enable it to image the cells and tissue using optical light guides, and that they wish to give it the ability to stimulate and gather information about the electrical activity of cells.
An article about the research appeared in a recent edition of the journal IEEE Transactions on Biomedical Circuits and Systems; Blain Christen was lead author and Andreou was co-author. The work was supported by the National Science Foundation and the National Institutes of Health.
For more information, visit: www.jhu.edu
- 1. A single unit in a device for changing radiant energy to electrical energy or for controlling current flow in a circuit. 2. A single unit in a device whose resistance varies with radiant energy. 3. A single unit of a battery, primary or secondary, for converting chemical energy into electrical energy. 4. A simple unit of storage in a computer. 5. A limited region of space. 6. Part of a lens barrel holding one or more lenses.
- 1. A localized fracture at the end of a cleaved optical fiber or on a glass surface. 2. An integrated circuit.
- An instrument consisting essentially of a tube 160 mm long, with an objective lens at the distant end and an eyepiece at the near end. The objective forms a real aerial image of the object in the focal plane of the eyepiece where it is observed by the eye. The overall magnifying power is equal to the linear magnification of the objective multiplied by the magnifying power of the eyepiece. The eyepiece can be replaced by a film to photograph the primary image, or a positive or negative relay...
- Pertaining to optics and the phenomena of light.
- The technology of generating and harnessing light and other forms of radiant energy whose quantum unit is the photon. The science includes light emission, transmission, deflection, amplification and detection by optical components and instruments, lasers and other light sources, fiber optics, electro-optical instrumentation, related hardware and electronics, and sophisticated systems. The range of applications of photonics extends from energy generation to detection to communications and...
MORE FROM PHOTONICS MEDIA