Koheras to Market for Aculight

Rigaku Beijing Corporation, a subsidiary of Rigaku, a manufacturer of x-ray analysis, measurement, and testing instruments, has named Jeff Li CEO. Li previously served as vice president and head of...

A method of simulation of the additive manufacturing process could enable better yields and higher-quality results. Researchers from Fraunhofer member institutions combined different methods to...

Physicists at the Max Planck Institute of Quantum Optics developed a method that could facilitate the construction of powerful and robust quantum computers, as well as the secure transmission of...

Leonardo Electronics US appointed Steve Patterson CTO for its laser solutions business unit. The unit designs and manufactures laser diodes for defense and commercial applications. Patterson has over...

The LDD-1321 from Meerstetter is a continuous wave laser diode driver designed for low-current applications. It features an output current of 0 - 1.5 A and an output voltage of 0 - 14 V, with a DC...

The SR series from Luxinar are CO2 laser sources for ablating, cutting, drilling, marking, and scribing on materials such as glass, metals, paper, plastics, and wood. The lasers, which come in...

The Elios 3 indoor lidar drone from Flyability SA is designed for Industry 4.0 applications. Collision-tolerant for indoor 3D mapping, the device is powered by the FlyAware™ SLAM engine,...

SCANLAB’s SCANmotionControl is a trajectory planning software for scan systems, designed to accurately track dynamic-limited setpoints. Through the simultaneous adjustment of laser power and...

Materials processing with lasers is actually a broad term for a diverse range of applications. The major categories of these uses, and the lasers that service them, are summarized Table 1. At one...

When purchasing an industrial laser system, the astute buyer will look for a Class 1 laser product — a system where the laser beam hazard is completely enclosed and there is no potential laser...

The term fluorescence is often applied as a synonym for photoluminescence, although luminescence actually covers fluorescence and phosphorescence. Both of these terms describe the process of...

Silicon photonics is widely considered a key enabling technology for further development of optical interconnect solutions needed to address growing traffic on the internet. From the first submarine...

This application note demonstrates the use of ATR-FTIR spectroscopy for the analysis of human serum albumin. An IR5 FTIR spectrometer was used, equipped with a heated ATR accessory, to help tackle...

OPTOMAN takes innovation very seriously and makes sure that optical components are able to resist the ongoing increase of laser power and decrease in pulse duration, thus high LIDT is OPTOMAN‘s bread...

Lumispot Tech laser ranging module products designed for different ranging distance, which could be easily mounted in different platforms.

3m.i.k.r.o.n.™ is the technology platform for compact, efficient, fast and reliable lasers for a wide range of potential applications in the field of medical engineering and industry.

Photonics Media invites you to join us for our upcoming FREE digital conference, "Photonics for Ophthalmology." The event will feature several 15-minute online presentations on the use of light-based...

Over the last decade, material processing using ultrafast laser pulses with pulse durations in the range between 300 fs and about 15 ps has gained in popularity due to the small heat-affected zone...

This event is supported by the European initiatives presented and is moderated by EPIC, the European Photonics Industry Consortium. The European Commission is helping companies access the...

It is no longer sufficient for a laser to work fine for several days in a nonlinear microscopy lab. Routine two- and three-photon imaging depends on reliable laser output parameters over weeks and...

Mode-locking is a technique used in lasers to produce ultrashort pulses of light with durations on the order of picoseconds, femtoseconds, or even attoseconds. This method synchronizes the phases of...

Laser active elements typically refers to the substances or materials within a laser system that play a critical role in the amplification of light through the process of stimulated emission. These...

A fiber Bragg grating (FBG) is a type of optical filter that is inscribed or "written" into the core of an optical fiber. It consists of a periodic modulation of the refractive index along the length...

Continuous wave (CW) refers to a type of signal or transmission where the signal is constant and does not vary with time. In various contexts, the term is used to describe continuous, uninterrupted...

A legacy of excellence has been shaping the world of optics since 1894. Welcome to Sill Optics where brilliance is forged with precision and innovation meets passion.

This Software Highlight focuses on Fast Mapping in our Ramacle software. Fast Mapping enables the user to acquire Raman maps with significantly reduced acquisition times via more efficient stage...

CODIXX is a corporation under German Law, established in September 1998. After a period of research and development CODIXX started the production of a new family of dichroic glass polarizers in 2002....

Photonics Media is the publisher of Photonics Spectra, BioPhotonics, and Vision Spectra magazines in print, digital and mobile app formats; the Photonics Marketplace featuring the Photonics Buyers'...

FOCtek provides customers with all types of custom manufactured lenses, Precision Optical Components, Polarizing Optics, Prisms, Filters, Coatings, Optical Systems, Crystals, Nonlinear Crystals,...

OHARA manufactures more than 130 environmentally safe optical glass types, free of both lead and arsenic. More than 300 tons of optical glass are melted per month, available in the following forms of...

Established in 1985, OZ Optics is a leading worldwide supplier of fiber optic components, test equipment and sensors. OZ Optics manufactures its products in three locations, Ottawa (Canada),...