J.P. Sercel Expands into Malaysia

In recent years, lasers have made significant inroads into analytical applications, such as semiconductor test and analysis. They are now incorporated into analytical instruments, for example, to...

Under the European Horizon 2020 project GALACTIC, partners Laser Zentrum Hannover (LZH, Germany), Optomaterials (Italy), and Altechna (Lithuania) have established a European supply chain to produce...

MICROOLED, a manufacturer of high-resolution, low power consumption OLED microdisplays, raised €21 million ($23.6 million) in a fundraising round. MICROOLED is targeting microdisplay...

Dental laser supplier BIOLASE appointed Jennifer Bright CFO and Steven Sandor COO. Bright served as the company’s vice president of finance beginning in April 2021. Sandor joined the company in...

The OBIS 640 XT from Coherent Corp. is a red diode-pumped solid-state laser module for super-resolution microscopy. With a maximum 1000-mW output at 640 nm, the module includes integrated control...

A series of 1064-nm silicon avalanche photodiode (APD) preamplifier modules from CMC Electronics Inc. is designed to improve laser applications. The receivers feature a high signal-to-noise...

The Leybold Optics IBS series offers ion beam sputtering with extremely low-loss optical coatings, ideal for the production of your high-precision coatings for laser optics, gyroscopes, metrology,...

The LVCM-025-029-02 and LVCM-025-029-02M miniature linear voice coil servo motors from Moticont are 1-in. diameter brushless devices. The high-speed devices offer high force-to-size ratios,...

Applications facilitated by tunable lasers fall into two categories: situations in which one or more discrete wavelengths are not available from any single- or multiline fixed-wavelength laser, or...

Excimers are pulsed gas lasers that deliver high output power and pulse energies in the ultraviolet and deep-ultraviolet wavelengths. This enables them to power applications that cannot be supported...

Over 60 years have passed since the first demonstration of a laser in 1960. After the initial spark of interest, lasers were for a while categorized as “a solution waiting for a problem,”...

The basic setup in laser perforation includes a pulsed laser, a lens and either a moving mirror, a rotating web or both. Each laser pulse creates a hole in the material. During the blank time in...

Explore Lumispot Tech's advanced remote sensing mapping laser solutions, enhancing geospatial technology and insights. Delve into our capabilities in satellite imagery, aerial mapping, and spatial...

High-speed adaptive correction of optics, based on real-time metrology feedback, has benefitted numerous scientific communities for several decades. However, it remains a major technological...

In Laser Range Finder (LRF) design, the right combination of Pulsed Laser Diodes (PLDs) and Avalanche Photodiodes (APDs) can enhance range, accuracy, battery life and overall cost. Laser Components...

A laser safety program is the cornerstone of any organization using Class 3B and 4 laser systems. Management is responsible for ensuring the safe use of lasers owned and operated under its control....

In this presentation, Field introduces a cutting-edge, 3D freeform volumetric index of refraction gradient optics (VIRGO) technology platform that includes engineered optical nanocomposites,...

Industrial laser applications such as 3D printing and micromachining require a variety of scan systems to accommodate current market demands. A trade-off always exists between throughput, accuracy,...

The semiconductor, micromachining, and ophthalmology markets, and even the emerging quantum computing market all heavily influence the direction for future high-performance laser developments. Today,...

This webinar will cover laser engine and beam delivery options for microwelding applications for a range of markets, including medical device manufacturing, automotive components, electronic leads,...

An excimer laser is a type of ultraviolet laser that emits short pulses of light in the ultraviolet spectrum. The term excimer is derived from excited dimer, reflecting the nature of the gain medium...

An ultrafast laser is a type of laser that emits extremely short pulses of light with durations typically on the order of femtoseconds (10-15 seconds) or picoseconds (10-12 seconds). These lasers are...

A femtosecond laser is a type of laser that emits ultrashort pulses of light with durations on the order of femtoseconds, where one femtosecond is equal to 10-15 seconds. These lasers are capable of...

Q-switched operation, or q-switching, is a technique used in lasers to produce short and intense pulses of light. The term "Q" in q-switching stands for "quality factor," which is a measure of the...

Leonardo DRS Daylight Solutions' line of business is the world's leading provider of best-in-class, mid-infrared, quantum cascade laser sources for life sciences, research, industrial, and defense...

Edinburgh Instruments is a world-leader in both single photon counting and time correlated single photon counting (TCSPC) based fluorescence spectrometers. Our product range includes: FLS1000...

As a leader in the laser system and LED light sources business, Omicron-Laser has been developing, manufacturing, and distributing innovative laser and LED light sources since 1989. Omicron offers CW...

New start, new image BWT provides you with unchanging high-quality products and services. We are committed to becoming a global leader in laser solutions, let the dream drive the light, and inspire...

A diode-pumped solid-state laser is a type of laser system that uses semiconductor diode lasers to pump energy into a solid gain medium, resulting in the generation of coherent light. This technology...

FOCtek provides customers with all types of custom manufactured lenses, Precision Optical Components, Polarizing Optics, Prisms, Filters, Coatings, Optical Systems, Crystals, Nonlinear Crystals,...

Established in 1985, OZ Optics is a leading worldwide supplier of fiber optic components, test equipment and sensors. OZ Optics manufactures its products in three locations, Ottawa (Canada),...

OHARA manufactures more than 130 environmentally safe optical glass types, free of both lead and arsenic. More than 300 tons of optical glass are melted per month, available in the following forms of...

LaserPoint manufactures a wide portfolio of laser power and energy meters able to perform laser measurements with high accuracy. They developed the hard coatings to absorb the laser radiation which...