Veeco Instruments Inc.

Multifield imaging is a new imaging technique that enables the simultaneous capture of multiple images under various lighting conditions. Coupled with time delay integration (TDI), this emerging...

Cutting Edge Optronics (CEO), a subsidiary of Northrop Grumman, appointed Scott Mize general manager. Mize previously held roles at CEO such as COO, director of engineering, and engineering programs...

NASA’s Lunar Flashlight has communicated with mission controllers and confirmed it is healthy after launching Dec. 11 from Cape Canaveral Space Force Station. The satellite embarked on a...

A polymer that can be modified quickly with low-power lasers emitting infrared and visible light could provide a safe, inexpensive method to produce polymer surfaces for biomedical devices,...

A gas sensor measuring acetone level in exhaled air from Olythe SAS can aid in the diagnosis of certain pathologies such as ketosis or diabetic ketoacidosis. The OCIEngine sensor uses IR...

The Sona-6 back-illuminated sCMOS camera from Andor Technology can be used for life science research and detection in challenging, light-starved imaging applications. The noise floor has been...

The line of carbon dots from Alfa Chemistry are carbon-based zero-dimensional material in water-soluble and oil-soluble form. They have a wavelength range of 415 - 570 nm and have quantum yields of...

Omicron-Laser introduces its latest plug & play system, the BrixXHUB Ultra. As the first highly integrated multimode high-power laser light engine on the market, it is the perfect fit for...

Over 60 years have passed since the first demonstration of a laser in 1960. After the initial spark of interest, lasers were for a while categorized as “a solution waiting for a problem,”...

Since their invention in the late 1960s, charge-coupled devices, also called CCDs, have found widespread use in imaging applications. Electronic cameras based on CCD technology are used in...

The wavelength range of commercially available LEDs with single-element output power of at least 5 mW is 275 to 950 nm. Each wavelength range is made from a specific semiconductor material family,...

As recently as five years ago, shopping for a microscope light source was fairly straightforward. For routine applications, it was tungsten halogen, typically 100 W, while for fluorescence, it was an...

Overview of Rapid Automated Modular Microscope.

An overview of diSPIM

Finding the ideal ultra-fast laser source for a multiphoton imaging setup is not trivial. It is a fine balance between peak power, pulse energy and laser wavelength. In this white paper we show that...

For some advanced microscopy and nanoscopy techniques it becomes necessary to modify existing instrumentation or build an instrument from scratch. This article helps readers determine whether a...

Fluorescence imaging is a key technique in both biomedical research and clinical diagnosis. Fluorescence-based microscopy for high-resolution and high-throughput multifluorophore imaging typically...

The publishers of BioPhotonics invite you to attend a free virtual conference spanning three days. The BioPhotonics Conference will feature insights and innovations in microscopy, spectroscopy, flow...

LED illumination for fluorescence microscopy systems has progressed significantly from a time when LED sources had low optical power and a limited range of wavelengths. While the benefits of LED...

Matrix-assisted laser desorption/ionization (MALDI) imaging is a powerful mass spectrometry-based approach that allows for the simultaneous detection of hundreds of biomolecules from one tissue...

Supercontinuum refers to a broad spectrum of light that spans a wide range of wavelengths, typically from the visible to the near-infrared or even mid-infrared regions of the electromagnetic...

The technology that deals with the interaction of organic materials with light and other forms of radiant energy whose quantum unit is the photon. This includes the emission, detection, absorption,...

This hands-on session about FD-FLIM by Gerhard Holst from PCO AG was given as part of the FLIM Symposium "Beginners Guide to Fluorescence Lifetime Imaging in Life Sciences".

Fluorescent filter is a key component of biomedical and life science instruments, and its main function is to separate and select the characteristic band spectra of excitation light and emission...

Established in 1990, Applied Scientific Instrumentation is a reknown American company committed to the advancement of science. ASI products have been thoroughly tested and evaluated in numerous labs...

At Andor, it matters to us that the products we develop make a real difference to our customers and contribute significantly to their research across Immunology, Microbiology, Neuroscience, Cells &...

Established in 1985, OZ Optics is a leading worldwide supplier of fiber optic components, test equipment and sensors. OZ Optics manufactures its products in three locations, Ottawa (Canada),...

CASTECH is a recognized leading supplier of nonlinear optical crystals, laser crystals and precision optical components for laser, telecom, medical, analysis and detector markets. Products...

The Optical Engineering Experts® Optikos designs and manufactures metrology products for measuring and assuring optical image quality; and provides optical engineering design, development,...

Fresnel Technologies Inc. is an expert manufacturer of molded plastic optics, including Fresnel lenses and related optical components, as well as infrared transmitting materials and optics made from...