Search
Menu
CASTECH INC - New Building the Bridge of Light

High IR Levels in Some Green Lasers

Facebook X LinkedIn Email
GAITHERSBURG, Md., Aug. 6, 2010 — “Beware the dim laser pointer,” NIST researchers have recently said. According to a team led by physicist Charles Clark at the National Institute of Standards and Technology the group has found that a green laser pointer emitted almost twice its rated power level of light, but at invisible and potentially dangerous infrared wavelengths rather than green.

A new NIST technical note describes the nature of the problem as well as a home test using an inexpensive webcam that can detect excess infrared light from green lasers.

Late last year, the research team purchased three low-cost green laser pointers advertised to have a power output of 10 milliwatts (mW). Measurements showed that one unit emitted dim green light but delivered infrared levels of nearly 20 mW—powerful enough to cause retinal damage to an individual before he or she is aware of the invisible light. NIST’s Jemellie Galang and her colleagues repeated the tests with several other laser pointers and found similarly intense infrared emissions in some but not all units.


IR leakage: (Top) Photo from an ordinary camera shows light from a green laser diffracted into several spots. The green laser pointer is visible in the foreground. (Bottom) The same vignette photographed by a webcam with no infrared-blocking filter reveals intense diffraction spots from 808nm infrared light, invisible to the eye. (Image: NIST)

The problem stems from inadequate procedures in manufacturing quality assurance, according to the research team. Inside a green laser pointer, infrared light from a semiconductor diode laser pumps infrared light at a wavelength of 808 nm into a transparent crystal of yttrium orthovanadate doped with neodymium atoms (Nd:YVO4), causing the crystal to lase even deeper in the infrared, at 1064 nm. This light passes through a crystal of potassium titanyl phosphate (KTP), which emits light of half the wavelength: 532 nm, the familiar color of the green laser pointer.

PI Physik Instrumente - Revolution In Photonics Align LW MR3/24

However, if the KTP crystal is misaligned, little of the 1064 nm light is converted into green light, and most of it comes out as infrared. Excess infrared leakage can also occur if the coatings at both ends of the crystal that act as mirrors for the infrared laser light are too thin.

The NIST team says this problem could be solved by incorporating an inexpensive infrared filter at the end of the laser, which could reduce infrared emissions by 100-1000 times depending on quality and cost. Although these filters exist in modern digital cameras and more expensive green laser pointers, they often are left out of the inexpensive models.

The team demonstrates a home test that laser hobbyists could conduct to detect excessive infrared leakage, by using a common digital or cell phone camera, a compact disc, a webcam and a TV remote control. Regardless, they say owners of the devices should never point the lasers at the eyes or aim them at surfaces such as windows, which can reflect infrared light back to the user—a particularly subtle hazard because many modern energy-saving windows have coatings designed specifically to reflect infrared.

The researchers are all members of the Joint Quantum Institute, a collaboration of NIST and the University of Maryland. Co-author Edward W. Hagley is also at Acadia Optronics in Rockville, Md.

For more information, visit:  www.nist.gov 




Published: August 2010
Glossary
infrared
Infrared (IR) refers to the region of the electromagnetic spectrum with wavelengths longer than those of visible light, but shorter than those of microwaves. The infrared spectrum spans wavelengths roughly between 700 nanometers (nm) and 1 millimeter (mm). It is divided into three main subcategories: Near-infrared (NIR): Wavelengths from approximately 700 nm to 1.4 micrometers (µm). Near-infrared light is often used in telecommunications, as well as in various imaging and sensing...
potassium titanyl phosphate
A crystalline material with a high electro-optic coefficient, capable of operating at short wavelengths, with applications in laser, optical disc, printing and microwave systems.
Acadia OptronicsAmericasCharles ClarkCoatingsdiode lasersEdward HagleyFiltersgreen laser pointergreen lasersindustrialinfraredinfrared leakageinvisible wavelengthsLight SourcesMarylandmirrorsNISTOpticspotassium titanyl phosphateResearch & Technologyretinal damageTest & MeasurementLasersLEDs

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.