Toptica Hires Applications Specialist

Scientists from Brookhaven National Laboratory showed that ionic liquids provide an efficient means to convert one color of laser light into another. The discovery could lead to a way to create...

If lasers helped to redefine many manufacturing operations, then ultrashort-pulsed (USP) lasers promise to revolutionize them. They can process almost any material, and they can do so with a...

VIGO Photonics opened its first office in the U.S., in St. Petersburg, Fla. The North American headquarters is headed by Scott Riggi and will serve as the primary interface for customers in the U.S.,...

Sensing perception system developer Aeva has partnered with SICK AG, a provider of industrial sensing solutions and cameras, in a multiyear collaboration to bring Aeva’s frequency-modulated...

The single-frequency, 308-nm fiber-based UV laser from AdValue Photonics Inc. emits 3 W of average power with a diffraction limited beam. The device enables reliable, high-performance operation...

The P20 PLUS laser engraver and cutter from Atezr is a four-beam diode device with a work area of up to 430 × 430 mm. It can cut >100 different kinds of materials with an engraving...

Three deep-UV lasers from IPG Photonics Corp. feature proprietary nonlinear crystals for reliability in numerous industries and micromachining applications. The fiber-based architectures...

The FNV-402-3000M laser diode from Frankfurt Laser Co. is a high-power, 402-nm blue laser diode that delivers output power of >3W. Built in a compact 9-mm TO can SOT-148, the device offers...

Neodymium-doped crystals and glasses such as Nd:YAG (neodymium:yttrium aluminum garnet) have long been used as laser gain materials. Optically pumped, they produce an output wavelength close to 1...

Given the pace at which technology advances, there always seems to be a learning curve. With the abundance of consumer electronics available, there typically is no right or wrong way to use these...

Over 60 years have passed since the first demonstration of a laser in 1960. After the initial spark of interest, lasers were for a while categorized as “a solution waiting for a problem,”...

Materials processing with lasers is actually a broad term for a diverse range of applications. The major categories of these uses, and the lasers that service them, are summarized Table 1. At one...

We started developing FACs more than 15 years ago. The result is highly automated in-house processes which allow for competitive prices – even with high volumes. Diode lasers are efficient, compact,...

Overview of the possibilities in Industrial Applications

Answering some common questions new users of optical design and analysis software have are “How accurate are the results?” or “Can I trust the results I get?” and discussing the importance of...

In the rapidly evolving world of industrial machine vision, hyperspectral imaging (HSI) has emerged as an invaluable tool, offering a wealth of information for various applications. This white paper...

Light-sheet fluorescence microscopy (LSFM) has generated significant interest in the biological community. Not only does it deliver light to only the in-focus portion of a specimen, decreasing the...

Konstantin Birngruber and Max Eisele introduce TOPTICA's next-generation laser technology by highlighting multicolor light engines for standard fluorescence microscopy, as well as TOPTICA's...

In this webinar, Max Eisele, Ph.D., will give an introduction to two-photon microscopy and highlight the potential of multiphoton excitation as compared to the standard fluorescence microscopy...

Diode laser technology offers a broad range of performance, with unmatched scaling of wavelength, power, and beam format. It is also available in a wide selection of formats, from single emitters to...

The term "embedded laser" typically refers to a laser device that is integrated or embedded into a larger system or structure. In this context, "embedded" implies that the laser is an integral part...

An excimer laser is a type of ultraviolet laser that emits short pulses of light in the ultraviolet spectrum. The term excimer is derived from excited dimer, reflecting the nature of the gain medium...

An optical filter is a device that selectively transmits or blocks specific wavelengths, or colors, of light. Optical filters are used to control the spectral content of light in various...

An alexandrite laser is a solid-state laser that utilizes a synthetic crystal made from the rare earth element alexandrite (BeAl2O4:Cr3+). This crystal is capable of emitting laser light in the...

Luminate NY, the only optics, photonics and imaging (OPI) accelerator and investment fund in the world, announced the final winners at the Light Tomorrow with Today event in Rochester, NY. For the...

Students from large and small size companies and bigger Department of Defense affiliates of the AIM Photonics Institute took part in the recent AIM Photonics Summer Academy at MIT. This was the third...

Watch a quick demo to see how scientific imaging systems enable fully automated visual inspection of illuminated displays and display components. ProMetric Imaging Colorimeters and TrueTest™ Software...

Tune into this month’s edition of Light Matters for the complete list of Photonics Media’s Industry Beacon award winners. We’ll also introduce you to an Industry Beacon in the Educator category, and...

FOCtek provides customers with all types of custom manufactured lenses, Precision Optical Components, Polarizing Optics, Prisms, Filters, Coatings, Optical Systems, Crystals, Nonlinear Crystals,...

OHARA manufactures more than 130 environmentally safe optical glass types, free of both lead and arsenic. More than 300 tons of optical glass are melted per month, available in the following forms of...

The LaCroix name is synonymous with quality precision optics. Since 1947, three generations of family leadership have guided LaCroix Precision Optics to become the premier precision optics...

Established in 1985, OZ Optics is a leading worldwide supplier of fiber optic components, test equipment and sensors. OZ Optics manufactures its products in three locations, Ottawa (Canada),...