Search
Menu
Lumencor Inc. - Power of Light 4-24 LB

Low-noise oscillator improves microwave signal stability

Facebook X LinkedIn Email
Compiled by Photonics Spectra staff

A new low-noise oscillator generates microwave signals more pure and stable than those from conventional electronic sources. The instrument could improve signal stability and resolution in radar, communications and navigation systems, and in certain types of atomic clocks.

Created by physicists at the National Institute of Standards and Technology, the device is a new application of optical frequency combs – tools based on ultrafast lasers for precisely measuring optical frequencies of light. Frequency combs are used as “gears” for experimental next-generation atomic clocks, converting optical signals to lower microwave frequencies that can be counted electronically.

Because the instrument works so well, NIST scientists had to make two copies of it so that they would have a separate tool precise enough to measure the system’s performance. Each low-noise system is based on a continuous-wave laser, with its frequency locked to the extremely stable length of an optical cavity with a high-quality factor, assuring a steady, persistent signal.


University of Colorado graduate student Matt Kirchner fine-tunes an ultrastable microwave generator that he helps operate at NIST. Courtesy of Burrus/NIST.


This laser, which emitted yellow light in the demonstration but could be another color, is connected to a frequency comb that transfers the high level of stability to microwaves. The transfer process greatly reduces – to one-thousandth of the previous level – random fluctuations in the peaks and valleys, or phase, of the electromagnetic waves over time scales of 1 s or less. This results in a stronger, purer signal at the exact desired frequency.

The device’s base microwave signal is 1 GHz, which is the repetition rate of the ultrafast laser pulses that generate the frequency comb. Its signal also can be a harmonic, or multiple, of that frequency. The laser illuminates a photodiode that produces a signal at 1 GHz or any multiple up to ~15 GHz. For example, many common radar systems use signals near 10 GHz.

These new oscillators may be useful in radar systems for detecting faint or slow-moving objects, the physicists say. They also can be used to make atomic clocks that operate at microwave frequencies. Other applications include radio astronomy that couples signals from space with arrival times at multiple antennas, and high-resolution analog-to-digital conversion of very fast signals for communications or navigation.

Research findings appeared online June 26 in Nature Photonics (doi: 10.1038/nphoton.2011.121).
Bristol Instruments, Inc. - 872 Series High-Res 4/24 MR

Published: September 2011
Glossary
astronomy
The scientific observation of celestial radiation that has reached the vicinity of Earth, and the interpretation of these observations to determine the characteristics of the extraterrestrial bodies and phenomena that have emitted the radiation.
continuous-wave laser
A laser that emits radiation continuously rather than in short bursts, as in a pulsed laser.
radio astronomy
The detection and analysis of naturally formed extraterrestrial electromagnetic radiation within the radio frequency range of the spectrum.
Americasanalog-to-digital conversionastronomyatomic clocksBasic ScienceCommunicationscommunications systemscontinuous-wave laserCW lasersElectronics & Signal Analysisfrequency combsMarylandmicrowave frequenciesmicrowave signal generationNational Institute of Standards and Technologynavigation systemsNISToptical frequency combsOpticsoscillatorradar systemsradio astronomyResearch & TechnologyTech Pulseultrafast lasersLasers

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.