Search
Menu
Meadowlark Optics - SEE WHAT

Laser-based Process Purifies Carbon Nanotubes

Facebook X LinkedIn Email
Conventional ways of purifying carbon nanotubes -- necessary if they are to be used in the future as ultrastrong fibers, electrical wires in molecular devices or hydrogen fuel cell components -- are expensive processes that often result in some tubes being damaged or destroyed. Now a simpler method has been discovered that safely cleans the tubes by zapping them with carefully calibrated laser pulses. 

When carbon nanotubes -- the cylindrical form of the fullerene family -- are synthesized by any of several processes, a significant amount of contaminants such as soot, graphite and other impurities also is formed. Purifying the product is an important issue for commercial application of nanotubes.

NanotubesBefore.jpg
NanotubesAfter.jpg

Before (top) and after electron microscope images of a pyroelectric detector coated with single-walled nanotubes (SWNTs) visually demonstrate the effect of the laser cleaning process. In addition, the SWNTs look visibly blacker after laser treatment, suggesting less graphitic material and increased porosity. (Images: NIST)
In a forthcoming issue of Chemical Physics Letters, a research team from the National Institute of Standards and Technology (NIST) in Gaithersburg and the National Renewable Energy Laboratory (NREL) in Golden, Colo., describes how pulses from an excimer laser greatly reduce the amount of carbon impurities in a sample of bulk carbon single-walled nanotubes without destroying the tubes.

Both visual examination and quantitative measurements of material structure and composition verify that the resulting sample is "cleaner." The exact cleaning process may need to be slightly modified depending on how the nanotubes are made, the authors note. But the general approach is simpler and less costly than conventional "wet chemistry" processes, which can damage the tubes and also require removal of solvents afterwards.

Hamamatsu Corp. - Earth Innovations MR 2/24

"Controlling and determining tube type is sort of the holy grail right now with carbon nanotubes. Purity is a key variable," said NIST physicist John Lehman, who leads the research. "Over the last 15 years there's been lots of promise, but when you buy some material you realize that a good percentage of it is not quite what you hoped. Anyone who thinks they're going into business with nanotubes will realize that purification is an important -- and expensive -- step. There is a lot of work to be done."

The new method is believed to work because, if properly tuned, the laser light transfers energy to the vibrations and rotations in carbon molecules in both the nanotubes and contaminants. The nanotubes, however, are more stable, so most of the energy is transferred to the impurities, which then react readily with oxygen or ozone in the surrounding air and are eliminated.

Success was measured by examining the energy profiles of the light scattered by the bulk nanotube sample after exposure to different excimer laser conditions. Each form of carbon produces a different signature. Changes in the light energy as the sample was exposed to higher laser power indicated a reduction in impurities. Before-and-after electron micrographs visually confirmed the initial presence of impurities (i.e., material that did not appear rope-like) as well as a darkening of the nanotubes post-treatment, suggesting less soot and increased porosity.

The researchers developed the new method while looking for quantitative methods for evaluating laser damage to nanotube coatings for next-generation NIST optical power measurement standards. The responsivity of a prototype increased five percent after the nanotube coating was cleaned, the scientists said.

For more information, visit: www.nist.gov

Published: January 2007
Glossary
excimer laser
An excimer laser is a type of ultraviolet laser that emits short pulses of light in the ultraviolet spectrum. The term excimer is derived from excited dimer, reflecting the nature of the gain medium used in these lasers. Excimer lasers are widely used in various industrial, medical, and scientific applications due to their ability to deliver high-energy, UV light in short pulses. Key features and characteristics of excimer lasers include: Excimer molecules: The gain medium of an excimer...
light
Electromagnetic radiation detectable by the eye, ranging in wavelength from about 400 to 750 nm. In photonic applications light can be considered to cover the nonvisible portion of the spectrum which includes the ultraviolet and the infrared.
nano
An SI prefix meaning one billionth (10-9). Nano can also be used to indicate the study of atoms, molecules and other structures and particles on the nanometer scale. Nano-optics (also referred to as nanophotonics), for example, is the study of how light and light-matter interactions behave on the nanometer scale. See nanophotonics.
nanotube
A nanotube, also known as a nanotubule or simply a tube-like structure, is a nanoscale cylindrical structure composed of various materials, including carbon, boron nitride, or other compounds. Nanotubes have unique physical and chemical properties due to their small size and specific atomic arrangement, making them of significant interest in various scientific and technological fields. One of the most well-known types of nanotubes is the carbon nanotube (CNT), which is composed of carbon...
photonics
The technology of generating and harnessing light and other forms of radiant energy whose quantum unit is the photon. The science includes light emission, transmission, deflection, amplification and detection by optical components and instruments, lasers and other light sources, fiber optics, electro-optical instrumentation, related hardware and electronics, and sophisticated systems. The range of applications of photonics extends from energy generation to detection to communications and...
Basic Sciencecarbon nanotubesCoatingsContaminantselectron micrographsexcimer laserfiber opticsfullereneimpuritieslightMicroscopynanonanotubeNews & FeaturesNISTNRELphotonicsSensors & Detectorssingle-walledwet chemistryLasers

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.