Search Menu
Photonics Media Photonics Buyers' Guide Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook
More News

Actuator Demonstrated in Optical Switch

Facebook Twitter LinkedIn Email Comments
Hank Hogan

An ideal microelectromechanical actuator would combine performance and economy. Researchers from the Electronics and Telecom Research Institute in Taejon, South Korea, have developed a laterally driven electromagnetic microactuator that may fit the bill. They recently demonstrated the device in a 2 x 2 optical switch.

In South Korea, researchers have demonstrated a laterally driven electromagnetic microactuator in a 2 x 2 optical switch. The actuators require only a simple fabrication process, the team says. Courtesy of Jong Soo Ko.

The heart of the actuator is an arch-shaped spring less than a millimeter long. That small addition pays big dividends, said researcher Jong Soo Ko. "It's a simple structure and very simple fabrication process," he noted. "That means a low production cost."

The arch bows to the right or left and connects to stationary pads at both ends by U-shaped structures. The actuator sits atop a magnet, so that when current flows through the device, the magnetic field generates force and deflects the spring. The spring snaps to a new position -- for example, from a rightward to a leftward bow -- and remains there as long as sufficient current is applied. When the current stops, the spring snaps back.

To demonstrate the utility of the actuator design, the researchers constructed prototype optical switches. They mounted micromirrors on leaf springs, which could be switched through a 60-µm deflection. The fabrication process required less than 24 hours, and Ko noted that optimization could drastically reduce production time, effort and expense.

The leaf springs are a sandwich of polycrystalline silicon and aluminum, making the devices resistant to shock and fatigue. They continued to work after the group subjected them to a 1-m drop test on a cement floor and to 1 million oscillations.

Ko and others are working to understand the spring snap-through and hope to create practical micromachines based on the actuator. "From now on, we have to design and fabricate some devices for real applications," he said.

Photonics Spectra
Oct 2002
CommunicationsResearch & TechnologyTech Pulse

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2020 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.