Adaptive Optics

Extends the Reach of Far-Field Microscopy

Nancy D. Lamontagne, News Editor

By taking advantage of adaptive optics technology, confocal and multiphoton microscopy could achieve greater depth and resolution, to the benefit of biological studies.

In confocal and multiphoton microscopy, light travels to the focal plane and excites fluorescence in the sample, and the fluorescence travels back through the optics to a detector. During this trip, the light meets different surfaces that introduce aberrations into the image. In far-field techniques, these aberrations can reduce both the axial resolution and the signal, placing severe limits on image quality and depth. Researchers have found that adaptive optics may be able to dynamically correct for such aberrations.

Microscopes induce a limited number of aberrations caused by the changes in the indices of refraction between the objective and immersion fluid, the coverslip and the specimen, and even within the specimen itself as light penetrates deeper. Researchers have tried to circumvent these errors using static correction, but this method doesn’t work with multiple specimens.

Adaptive optics, invented for astronomy to correct for the error induced by Earth’s atmosphere, may hold promise for microscopy. The technique can compensate for aberrations by measuring the error introduced by a specific sample — seen as a bend in the light’s wavefront — and applying the opposite error to the wavefront.

Although there are several approaches to finding the ideal shape to oppose the error, a deformable mirror is key to all approaches. Such a mirror can form different shapes because it consists of a membrane lying above many electrodes. Each computer-controlled electrode can pull the membrane to change the mirror’s shape on the fly. Now that such mirrors are readily available in a compact form for the relatively affordable price of around $8000, researchers are trying to integrate them into microscopes.

Confocal microscopy

A group led by Tony Wilson at Oxford University in the UK recently created such a system by using adaptive optics to correct for aberrations in a confocal microscope. In this kind of microscope, the excitation light and the emission light travel through the same optics, so both can be corrected by inserting one membrane mirror. The researchers’ system used the focal point of the light as the source of measured wavefronts, much as an artificial guide star is used in astronomy.

They have also applied the technique to multiphoton microscopy. Martin Booth, a team member, sees the primary role of adaptive optics as ensuring that a microscope performs optimally for all specimens.

For correction, the system requires only a deformable mirror, such as one the scientists tested from OKO Technologies in Delft, the Netherlands, and some lenses. They chose the mirror, made of an aluminized silicon-nitride membrane above 37 hexagonal electrodes, because of its compactness and low cost and because, it was one of the first few to appear on the market, Booth said.

A number of combinations of optics can produce the same results. “The configuration used in the PNAS paper [April 30, 2002] is a tidy implementation which could be easily incorporated into an existing microscope with the minimum amount of hardware,” he said. They are now testing other optical setups to increase the speed of correction.

The researchers used their system to detect and apply the correction needed for astigmatism, coma, trefoil and spherical aberrations in a single field of view. Because each correction required two scans, they turned down the laser power during the nonimaging scans to prevent photobleaching. They found that the method shortened the point-spread function by a factor of 1.8 in an image of a 200-nm polystyrene bead. For a section of fluorescent-labeled mouse intestine, the corrected images exhibited more contrast and sharpness than did the uncorrected images.

They have demonstrated correction of a few planes, and Booth said that once they understand the aberrations introduced by biological specimens, it may be possible to measure the aberrations from a few planes at different depths and use this data to calculate the correction for the entire 3-D volume. Such an approach would reduce the number of scans needed to correct for the entire image. They are working with a microscopy company to integrate their system into a confocal microscope, which Booth thinks could be available in two or three years.

Two-photon microscopy

Adaptive optics has an even greater potential to improve two-photon microscopy, because the intensity of the two-photon signal is quadratically dependent on the incident light. This means that aberrations make the signal level fall drastically. Researchers led by Theodore Norris at the Center for Ultrafast Optical Science at the University of Michigan in Ann Arbor used adaptive optics to increase the resolution of multiphoton imaging. They hope that one day they will be able to apply the technique to image deeply into tissue for the study of drug delivery systems.

Gentec Electro-Optics Inc - Measure Your Laser MR

Researchers at the University of Michigan in Ann Arbor used adaptive optics to increase the resolution of multiphoton imaging. They captured images of two-photon fluorescence at a focus depth of 600 μm before and after correction. Reprinted with permission from the Royal Microscopy Society, Journal of Microscopy.

They also used the OKO deformable mirror to correct for various aberrations, including both off-axis and on-axis. Instead of directly measuring the wavefront, they used a genetic learning algorithm in conjunction with nonlinear excitation from ultrashort pulses to find the best correction, because they knew that the optimum shape of the mirror would produce the brightest signal. They hoped this approach would avoid the loss of power that comes with direct measurement.

They first tried to correct for depth-induced spherical aberration by applying an opposite spherical aberration. In a solution of the dye coumarin and water — which has the same properties as a biological sample — they achieved an optimum solution in 10 generations (three minutes) that increased the scanning range from 150 to 600 μm. By applying a defocus bias to correct the same error, they were able to increase scanning range to 800 μm. Although the defocus bias produced better results, it suffered from a 50 percent loss of energy, which, the researchers say, would not be suitable for multiphoton imaging.

One drawback — that the mirror can be shaped in only one direction (pulled but not pushed) — prevents the mirror from being formed into the shapes necessary to correct for more complex aberrations. However, the mirror can be used to correct most aberrations in a practical microscope system, said team member Jing Yong Ye. Next, the group plans to test the device on real biological systems.

John Girkin and Paul Marsh at Strathclyde University’s Institute of Photonics in Glasgow, UK, are also using adaptive optics with the purpose of producing improved multiphoton images from deep within samples. Because multiphoton microscopy works by producing only a limited excitation volume, controlling this volume is crucial to the overall performance of the system. With a well-confined spot, every fluorescent photon can be employed to build up the image.

Rather than mathematically calculating the best corrections, the scientists are focusing on producing the best image. They have inserted a deformable mirror, again from OKO Technologies, into a point-scanned two-photon microscope. Although this reduces the potential field of view, it promises higher-quality images at depth.

According to Girkin, in a final practical system, users are more concerned about the quality of the images than about knowing the exact correction applied by the mirror. However, the researchers had to ensure that beam manipulation was not creating artifacts of the image. Therefore, to keep the images accurate as they delve deeper, they make sure that the structures remain consistent.

Protect the sample

Their method corrects for the average errors in a plane, but as they image more deeply, errors increase, and they also would like to correct for each point. However, Girkin said that the time required to change the mirror to correct for 256 x 256 points might damage the sample too much. “You sometimes have to compromise the ultimate optical performance in favor of producing biologically significant images,” he said.

Potentially, though, adaptive optics could do more than allow deeper imaging. For instance, because multiphoton imaging produces only sectioned images, finding the area of interest can be difficult and time-consuming, which can result in photo-toxic “damage” to the sample. But, Girkin said, with adaptive optics’ potential to rapidly alter the beam shape, it could be used to quickly find the region of interest by changing the beam’s shape into an ellipse (longer vertically than horizontally) so that the planes would become thicker. Once the image appeared, the beam could be quickly changed back to the ideal shape.

In multiphoton microscopy studies, protecting the biology is especially important because, once damage begins, it tends to continue at a very fast rate, Girkin said. “The farther you can stay from this threshold of biological damage, the better.” Adaptive optics allows imaging using lasers with lower average powers because the users can maintain a small excitation region.

Typically, Ti:sapphire lasers with average powers of around 500 mW are used in multiphoton microscopes, though only a small fraction of the power is used for most imaging applications. The extra power can be required when the user wishes to go deeper into the sample, but adaptive optics can allow the use of less power because the excitation photons are used more efficiently. Less power means lower-cost sources and less damage to the sample.

“This technology could potentially reduce the cost of multiphoton microscopy and open up new biological systems for study,” Girkin said.