Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Industrial Photonics Photonics Showcase Photonics ProdSpec Photonics Handbook
More News
Email Facebook Twitter Google+ LinkedIn Comments

Advances Lead to Miniature Supercontinuum Sources

Photonics Spectra
Oct 2004
Scott C. Buchter, Helsinki University of Technology
Bo Andersen, Koheras AS

Supercontinuum sources are finding increasing use in applications that require a source with very broad spectral bandwidth and high spatial brightness. A common method of generating supercontinuum light has involved the coupling of the output from a high-power femtosecond laser into a photonic crystal, or holey, fiber, in which a variety of nonlinear optical effects contribute to extreme spectral broadening. Although effective, the use of this type of pump source results in a complicated and expensive system that heretofore has restricted it to the laboratory.

In the past year, advances in fiber design and the use of miniature Q-switched pump lasers have led to the emergence of a new generation of supercontinuum sources. These devices, although smaller than a shoebox, provide spectral coverage and output powers similar to their lab-bound predecessors. This technology may enable supercontinuum sources to find real-world applications in telecommunications, biotechnology and basic research, and in the devices being considered tools rather than experiments.

Advances Lead to Miniature Supercontinuum Sources
Figure 1. Advances in fiber design and the use of miniature Q-switched pump lasers have enabled the development of supercontinuum sources with promise for various applications. Here, the output of a dual-wavelength-pumped system, dispersed by a grating, displays broad spectral bandwidth and high spatial brightness. Courtesy of Scott C. Buchter.

The heart of these systems typically is a diode-pumped, passively Q-switched Nd:YAG laser that generates nanosecond or subnanosecond pulses with a peak power of a few kilowatts. The use of passive Q-switching significantly reduces complexity by eliminating additional control electronics. Although monolithic microchip lasers may be used, thermal effects that limit average output powers hamper their utility.

Researchers at Helsinki University of Technology in Finland and at Koheras AS in BirkerØd, Denmark, have chosen a short-cavity, discrete-element design for their pump lasers in supercontinuum sources. Average powers of greater than 400 mW at 1064 nm in a suitable pulse format are possible with less than 2 W of diode pump power. This radiation is coupled directly into a photonic crystal fiber or frequency-doubled to 532 nm before coupling.

Advances Lead to Miniature Supercontinuum Sources
Figure 2. The output spectrum of an IR-pumped system spans more than 1000 nm. The system displays an output power stability of better than 1 percent over 12 hours.

The decision to use photonic crystal fiber rather than standard single-mode fiber is a result of the greater control one has over the dispersion properties of the former. In the case of infrared-only pumping, the fiber typically is designed to have a zero dispersion wavelength slightly shorter than the pump, at around 1040 nm. Four-wave mixing then is the primary mechanism for spectral broadening. The device generates a spectrum spanning more than 1000 nm (Figure 2). The average output power is approximately 115 mW, with a stability of better than 1 percent over a period of 12 hours.

Dual-wavelength pumped

In the other device design, a portion of the IR pump beam is frequency-doubled to 532 nm, and both beams are coupled into a photonic crystal fiber. The fiber in this case has two zero-dispersion wavelengths: one near 750 nm, and the other near 1600 nm. Four-wave mixing again is responsible for the spectral broadening, but this time with two widely separated pump wavelengths. This approach generates smooth continua in the visible portion of the spectrum (Figure 3). The average output power is 25 mW. In both devices, the output is spatially single-mode.

Advances Lead to Miniature Supercontinuum Sources

Figure 3. The output spectrum of a dual-wavelength-pumped system reveals smooth continua in the visible region.

There are many applications for which supercontinuum sources are suited. Measuring dispersion and loss in optical networks requires a source (or sources) that covers the wavelength range of interest and that does so with high single-mode power. These new sources fulfill both requirements.

Similar characteristics also are desirable for use in optical coherence tomography, a noninvasive imaging technique that is analogous to ultrasound but that employs light. The axial resolution is inversely proportional to the spectral bandwidth of the source, and the transverse resolution is determined by the focused spot size. Thus, a supercontinuum laser source is required to achieve micron-scale resolution in all three dimensions.

Another application of interest is active hyperspectral imaging, in which a scene is captured in many -- i.e., more than 100 -- spectral bands. The resulting data set contains the reflectance spectrum for each pixel in the image. When a broadband, short-pulse illumination source is used in a scanning geometry, the time of flight also can be measured, yielding a 3-D hyperspectral picture. The use of active illumination combined with time-gated detection provides a significant increase in signal-to-noise ratios.

Besides these specific applications, compact and low-cost supercontinuum sources are proving to be excellent general-purpose laboratory sources. For example, they allow one to measure at once the absorption spectrum of a material over the range spanned by the continuum. In addition, their short pulse widths enable pump-probe studies of time-dependent phenomena.

Although these first sources are well-suited to a variety of applications, they will continue to evolve to meet future needs. Miniature supercontinuum sources with coverage of the UV and mid-IR portions of the spectrum, as well as devices with greatly enhanced average powers or pulse energies, are under development.

femtosecond laser
A type of ultrafast laser that creates a minimal amount of heat-affected zones by having a pulse duration below the picosecond level, making the technology ideal for micromachining, medical device fabrication, scientific research, eye surgery and bioimaging.
supercontinuum light
A broadband, white-light source produced by high-intensity light pulses propagating in various media. High-energy, ultrashort pulses experience strong nonlinear interactions, such as self-phase modulation, cross-phase modulation, harmonic generation, four-wave mixing, and Raman scattering when propagating through matter. These interactions can broaden the spectrum of the light by as much as two orders of magnitude in some cases. The resultant broadband light, referred to as a supercontinuum,...
broad spectral bandwidthCommunicationsConsumerfemtosecond laserResearch & Technologyspatial brightnesssupercontinuum lightTech Pulselasers

Terms & Conditions Privacy Policy About Us Contact Us
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2018 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.